Mumin Sahin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mumin Sahin has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
C. Misirli
Trakya Univ, Dept Mech Engn, TR-22030 Edirne, Turkey
2 shared publicationsCenk Misirli
Trakya University
2 shared publications- Cenk Misirli
Mechanical Engineering , Trakya Universitesi , Edirne , Türkiye
2 shared publications - Alpay Tamer Ertürk
Department of Mechanical Engineering, Kocaeli University, Kocaeli, Turkey
1 shared publication - Ayse Nihan Basmaci
Vocational School of Technical Sciences, Tekirdag Namik Kemal University, 59030 Tekirdag, Turkey
1 shared publication - Bülent Eker
Trakya University, Tekirdağ Faculty of Agriculture
1 shared publication
Latest Publications
- 2 December 2022
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 28 (4) , 487-495
Effects of Sintering Temperature on Microstructural Properties of Ni1-xZnxFe2O4 Synthesized by Powder Metallurgy
Powder metallurgy (PM) is a modern manufacturing method that allows high-tech materials, alloys and complex shaped parts to be manufactured with precision and almost without the need for finishing operations such as deburring. PM basically involves powder production, powder processing, forming operations, pressing and sintering or pressure assisted hot consolidation. This paper reports results on Ni1-xZnxFe2O4 produced by powder metallurgy at different sintering temperatures. Ni1-xZnxFe2O4 is an interesting functional magnetic material due to its special properties such as stability, very good dielectric properties, electrical resistivity, low dielectric loss, chemical stability etc. all being important in cutting-edge technology. The use of Ni1-xZnxFe2O4 in diverse fields such as the biomedical field i.e. drug delivery is another vibrant research area. SEM imaging was performed for the structural analysis of the produced bulk sample. EDXRF analyses were performed for elemental composition along with SEM images.
- 2 December 2022
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 28 (4) , 487-495
Effects of Sintering Temperature on Microstructural Properties of Ni1-xZnxFe2O4 Synthesized by Powder Metallurgy
Powder metallurgy (PM) is a modern manufacturing method that allows high-tech materials, alloys and complex shaped parts to be manufactured with precision and almost without the need for finishing operations such as deburring. PM basically involves powder production, powder processing, forming operations, pressing and sintering or pressure assisted hot consolidation. This paper reports results on Ni1-xZnxFe2O4 produced by powder metallurgy at different sintering temperatures. Ni1-xZnxFe2O4 is an interesting functional magnetic material due to its special properties such as stability, very good dielectric properties, electrical resistivity, low dielectric loss, chemical stability etc. all being important in cutting-edge technology. The use of Ni1-xZnxFe2O4 in diverse fields such as the biomedical field i.e. drug delivery is another vibrant research area. SEM imaging was performed for the structural analysis of the produced bulk sample. EDXRF analyses were performed for elemental composition along with SEM images.
- Open Access
- 5 June 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (11) , 3908
Experimental Analysis of Welded Rods with a Functionally Graded Material Approach
In recent years, with the development of welding methods, using these methods in manufacturing industry and in advanced engineering has become more popular. In this study, mechanical properties of rods obtained by friction welding and electric arc welding are compared. Hence, three specimens with different material properties are manufactured, two of which are welded by friction welding and one of which is welded by electric arc welding. These three specimens are adapted to the ASTM E8-04 standard with the help of a universal lathe. Moreover, the tensile stress values and the elasticity modulus of all these specimens are obtained as a result of tensile tests. Accordingly, the effects of the type of welding and material properties used in manufacturing on the mechanical behavior of the specimens are examined. In addition, specimens taken from the cracked surfaces of the pieces broken from the specimens as a result of the tensile test are examined with SEM (scanning electron microscopy). These examinations reveal the microstructure of the specimens. The elemental distribution data obtained as a result of examinations with SEM and the mechanical property data obtained as a result of tensile tests support each other. Furthermore, effects of a heat affected zone (HAZ) on the mechanical properties of the rod are investigated as a functionally graded material.
- 5 June 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (11) , 3908
Open AccessExperimental Analysis of Welded Rods with a Functionally Graded Material Approach
In recent years, with the development of welding methods, using these methods in manufacturing industry and in advanced engineering has become more popular. In this study, mechanical properties of rods obtained by friction welding and electric arc welding are compared. Hence, three specimens with different material properties are manufactured, two of which are welded by friction welding and one of which is welded by electric arc welding. These three specimens are adapted to the ASTM E8-04 standard with the help of a universal lathe. Moreover, the tensile stress values and the elasticity modulus of all these specimens are obtained as a result of tensile tests. Accordingly, the effects of the type of welding and material properties used in manufacturing on the mechanical behavior of the specimens are examined. In addition, specimens taken from the cracked surfaces of the pieces broken from the specimens as a result of the tensile test are examined with SEM (scanning electron microscopy). These examinations reveal the microstructure of the specimens. The elemental distribution data obtained as a result of examinations with SEM and the mechanical property data obtained as a result of tensile tests support each other. Furthermore, effects of a heat affected zone (HAZ) on the mechanical properties of the rod are investigated as a functionally graded material.
- 17 April 2019
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 53 (2) , 207-213
Optimization of the process parameters of friction-welded St-Al joints
- 17 April 2019
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 53 (2) , 207-213
Optimization of the process parameters of friction-welded St-Al joints
- 30 June 2018
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 60 (6) , 647-652
Properties of Al/SiC metal matrix composites
Metal matrix composites have higher resistance compared to ceramic and polymer matrix composites. In this study, an aluminum 5754 alloy was fortified using 10 % SiC to obtain a metal matrix composite with properties superior to the original alloy. An improvement of mechanical properties was obtained by reinforcement with aluminum matrix composites which can be produced with various techniques. Mechanical properties of the composite material (Al/SiCp) were initially investigated, and then, the metallurgical properties were determined using an optical metal microscope and SEM. Furthermore, the percent of elongation, tensile strength and Vickers hardness are the input parameters for the mechanical properties. The tensile strength as an output response parameter of Al/SiCp materials was analyzed using experimental Taguchi technique design as an orthogonal array. In the present investigation, experiments were carried out to compare experimental results with predicted optimal values. ANOVA analysis rev... Kurzfassung Metallmatrix-Komposite haben eine höhere Festigkeit gegenüber keramischen und Polymermatrix-Kompositen. In der diesem Beitrag zugrunde liegenden Studie wurde die Aluminiumlegierung 5754 mit 10 % SiC verstärkt, um ein Matallmatrix-Komposit mit überragenden Eigenschaften gegenüber der ursprünglichen Legierung zu erhalten. Eine Verbesserung der mechanischen Eigenschaften kann mit der Verstärkung der Aluminiummatrix unter Nutzung verschiedener Techniken erreicht werden. Hierzu wurden die mechanischen Eigenschaften des Kompositmaterials (Al/SiCp) zunächst untersucht und dann die metallurgischen Eigenschaften mittels Licht- und Rasterelektronenmikroskopie ermittelt. Die Zusammenhänge zwischen prozentualer Dehnung, der Vickershärte und der Zugfestigkeit wurden mittels eines experimentellen Designs nach der Taguchi-Technik ermittelt, wobei ein orthogonales Array verwandt wurde. Es stellte sich heraus, dass das Kompositmaterial gegenüber statischen und dynamischen Beanspruchungen widerstandfähig ist. D...
- 30 June 2018
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 60 (6) , 647-652
Properties of Al/SiC metal matrix composites
Metal matrix composites have higher resistance compared to ceramic and polymer matrix composites. In this study, an aluminum 5754 alloy was fortified using 10 % SiC to obtain a metal matrix composite with properties superior to the original alloy. An improvement of mechanical properties was obtained by reinforcement with aluminum matrix composites which can be produced with various techniques. Mechanical properties of the composite material (Al/SiCp) were initially investigated, and then, the metallurgical properties were determined using an optical metal microscope and SEM. Furthermore, the percent of elongation, tensile strength and Vickers hardness are the input parameters for the mechanical properties. The tensile strength as an output response parameter of Al/SiCp materials was analyzed using experimental Taguchi technique design as an orthogonal array. In the present investigation, experiments were carried out to compare experimental results with predicted optimal values. ANOVA analysis rev... Kurzfassung Metallmatrix-Komposite haben eine höhere Festigkeit gegenüber keramischen und Polymermatrix-Kompositen. In der diesem Beitrag zugrunde liegenden Studie wurde die Aluminiumlegierung 5754 mit 10 % SiC verstärkt, um ein Matallmatrix-Komposit mit überragenden Eigenschaften gegenüber der ursprünglichen Legierung zu erhalten. Eine Verbesserung der mechanischen Eigenschaften kann mit der Verstärkung der Aluminiummatrix unter Nutzung verschiedener Techniken erreicht werden. Hierzu wurden die mechanischen Eigenschaften des Kompositmaterials (Al/SiCp) zunächst untersucht und dann die metallurgischen Eigenschaften mittels Licht- und Rasterelektronenmikroskopie ermittelt. Die Zusammenhänge zwischen prozentualer Dehnung, der Vickershärte und der Zugfestigkeit wurden mittels eines experimentellen Designs nach der Taguchi-Technik ermittelt, wobei ein orthogonales Array verwandt wurde. Es stellte sich heraus, dass das Kompositmaterial gegenüber statischen und dynamischen Beanspruchungen widerstandfähig ist. D...
- 15 June 2016
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 70 (5) , 1233-1240
Tribological Behavior of SiC Particulate Reinforced AA5754 Matrix Composite Under Dry and Lubricated Conditions
- 15 June 2016
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 70 (5) , 1233-1240
Tribological Behavior of SiC Particulate Reinforced AA5754 Matrix Composite Under Dry and Lubricated Conditions
- 24 January 2016
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 50 (1) , 109-115
Optimizing the parameters for friction welding stainless steel to copper parts
- 24 January 2016
- Published by Institute of Metals and Technology in Materiali in tehnologije
- Vol. 50 (1) , 109-115
Optimizing the parameters for friction welding stainless steel to copper parts
- 8 January 2016
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 47 (1) , 53-63
Characteristic and magnetic properties of Ni1–xZnxFe2O4 ferrites
- 8 January 2016
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 47 (1) , 53-63
Characteristic and magnetic properties of Ni1–xZnxFe2O4 ferrites
- Open Access
- 5 December 2012
- Published by IntechOpen
Effect of Micro Arc Oxidation Coatings on the Properties of Aluminium Alloys
- 5 December 2012
- Published by IntechOpen
Open AccessEffect of Micro Arc Oxidation Coatings on the Properties of Aluminium Alloys
- Open Access
- 5 December 2012
- Published by IntechOpen
Mechanical and Metalurgical Properties of Friction Welded Aluminium Joints
- 5 December 2012
- Published by IntechOpen
Open AccessMechanical and Metalurgical Properties of Friction Welded Aluminium Joints
- 31 July 2012
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 22 (3) , 840-847
Characterization of Properties in Friction Welded Stainless Steel and Copper Materials
- 31 July 2012
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 22 (3) , 840-847
Characterization of Properties in Friction Welded Stainless Steel and Copper Materials