Properties of Al/SiC metal matrix composites
- 30 June 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 60 (6) , 647-652
Abstract
Metal matrix composites have higher resistance compared to ceramic and polymer matrix composites. In this study, an aluminum 5754 alloy was fortified using 10 % SiC to obtain a metal matrix composite with properties superior to the original alloy. An improvement of mechanical properties was obtained by reinforcement with aluminum matrix composites which can be produced with various techniques. Mechanical properties of the composite material (Al/SiCp) were initially investigated, and then, the metallurgical properties were determined using an optical metal microscope and SEM. Furthermore, the percent of elongation, tensile strength and Vickers hardness are the input parameters for the mechanical properties. The tensile strength as an output response parameter of Al/SiCp materials was analyzed using experimental Taguchi technique design as an orthogonal array. In the present investigation, experiments were carried out to compare experimental results with predicted optimal values. ANOVA analysis rev... Kurzfassung Metallmatrix-Komposite haben eine höhere Festigkeit gegenüber keramischen und Polymermatrix-Kompositen. In der diesem Beitrag zugrunde liegenden Studie wurde die Aluminiumlegierung 5754 mit 10 % SiC verstärkt, um ein Matallmatrix-Komposit mit überragenden Eigenschaften gegenüber der ursprünglichen Legierung zu erhalten. Eine Verbesserung der mechanischen Eigenschaften kann mit der Verstärkung der Aluminiummatrix unter Nutzung verschiedener Techniken erreicht werden. Hierzu wurden die mechanischen Eigenschaften des Kompositmaterials (Al/SiCp) zunächst untersucht und dann die metallurgischen Eigenschaften mittels Licht- und Rasterelektronenmikroskopie ermittelt. Die Zusammenhänge zwischen prozentualer Dehnung, der Vickershärte und der Zugfestigkeit wurden mittels eines experimentellen Designs nach der Taguchi-Technik ermittelt, wobei ein orthogonales Array verwandt wurde. Es stellte sich heraus, dass das Kompositmaterial gegenüber statischen und dynamischen Beanspruchungen widerstandfähig ist. D...Keywords
This publication has 18 references indexed in Scilit:
- Microstructure, thermal behavior and mechanical properties of squeeze cast SiC, ZrO2 or C reinforced ZA27 compositesMaterials Science and Engineering: A, 2011
- Fatigue behavior of aluminum 5754-O and 6111-T4 spot friction welds in lap-shear specimensInternational Journal of Fatigue, 2008
- Application of traditional investment casting process to aluminium matrix compositesComposites Part A: Applied Science and Manufacturing, 2008
- Studies on squeeze casting of Al 2124 alloy and 2124-10% SiCp metal matrix compositeMaterials Science and Engineering: A, 2008
- Fabrication of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze castingJournal of Materials Processing Technology, 2006
- Strength differential effect in SiCpreinforced Al compositesZeitschrift für Metallkunde, 2002
- Practicalization of cast metal matrix composites (MMCCs)Materials & Design (1980-2015), 2001
- Particulate size effects in the particle-reinforced metal-matrix compositesActa Mechanica Sinica, 2001
- Squeeze casting: an overviewJournal of Materials Processing Technology, 2000
- Processing and Performance of an All‐Oxide Ceramic CompositeJournal of the American Ceramic Society, 1998