PSPradip Chandra Saha

Pradip Chandra Saha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pradip Chandra Saha has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Preventing Partial Discharge in Motor Winding Under Steep Voltage Pulses Using Functional Capacitive Field-Grading Composites

    by Omar Faruqe, Asif Muhammad Juberi, Pradip Chandra Saha, Chanyeop Park

    Power electronic converters (PEC) fed transformers and motor insulation face a considerable challenge from the non-sinusoidal repetitive steep high-voltage pulses leading to premature breakdown. The increased local electric stresses in the winding insulation cause partial discharge (PD), leading to the degradation and aging of the windings. This study investigates functional capacitive field-grading composites (FCFGC) to prevent the incidence of PD. PD tests are conducted on simplified test objects of motor windings, such as twisted pair samples, subjected to steeply rising square voltage waves. The FCFGC materials are fabricated by dispersing ferroelectric Barium Titanate (BTO) powder into Polydimethylsiloxane (PDMS) matrix. The FCFGC demonstrates higher relative permittivity compared to pure PDMS, and this characteristic also shows dependence on the electric field. The current-voltage (IV) characterization reveals that the electric field dependence of the FCFGC increases as the BTO filler contents are raised. PD experiments are carried out using unipolar square waveforms with slew rate as high as 0.22 kV/ns on enameled twisted pair wires. This involves applying a coating of pure PDMS as well as five distinct FCFGC samples with BTO loadings of 10%, 20%, 30%, 40%, and 50%. Experimental findings indicate that FCFGCs can reduce PD magnitudes and enhance Partial Discharge Inception Voltage (PDIV) compared to neat PDMS insulation. Increasing the BTO filler loading reduces PD magnitudes and increases the PDIV by 2.68 times (i.e., 168%). Additionally, numerical models are employed to conduct electric field analyses of the twisted pair experiments. These models incorporate the field-dependent permittivity of the FCFGC characterized experimentally, providing a more comprehensive understanding of the experimental outcomes.


  • Mitigating Partial Discharge at Low Pressures Using Electrets for All-Electric Aircraft

    by Pradip Chandra Saha, Asif Muhammad Juberi, Omar Faruqe, Chanyeop Park

    High electric fields generate partial discharges (PDs) that degrade electrical insulators at an accelerated rate, posing a greater risk to system reliability. PD can be mitigated by neutralizing the high electric fields using electrets, which create their own electric fields independently. Our previous studies have explored the effectiveness of electrets in mitigating PD under recurrent, steep voltage pulses at high temperatures. However, the mitigation of PD using electrets at low pressures and high temperatures remains unexplored. In this study, we demonstrate that Parylene high temperature (HT) thin-film electrets effectively mitigate PD at low pressures and high temperatures. We measured PD under steep square voltage pulses with slew rates as high as 68.75 V/ns, at pressures as low as 20 kPa, and at temperatures up to $260~^{\circ }$ C. The results indicate that Parylene thin-film electrets can reduce PD magnitude and increase PD inception voltage (PDIV) in harsh electrical and thermal conditions at low pressures.


  • Partial Discharge Characteristics of SiO₂/Si₃N₄ Electret Incorporated AlN Substrates

    by Asif Muhammad Juberi, Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Partial discharge (PD) is one of the main reasons for the degradation of dielectric material and insulation of power semiconductors and systems they drive. Subsequently, it is a challenge for the electrification of transportation systems, including ships. In recent years, electret, which can generate an electric field without an external voltage source, has been used to mitigate PD. Research on electrets shows fabricating and employing electrets to counteract locally concentrated high electric fields and mitigate PD under recurrent, steep voltage pulses generated by wide bandgap (WBG) power semiconductors. In most of the studies that used electret material to mitigate PD, it was coated on a metal substrate. However, in our study, we used a thin 520 nm SiO 2 /Si 3 N 4 double-layer electret on a ceramic substrate made of aluminum nitride (AlN) instead of metal. PD was measured under steep square voltage pulses with slew rates as high as 131.25 V/ns and at temperatures as high as 180°C. We measured PD magnitude and partial discharge inception voltage (PDIV). The results indicate that AlN substrates coated with SiO 2 /Si 3 N 4 thin film electrets can reduce PD magnitude and increase PDIV in harsh electrical and thermal conditions.


  • Preventing Space-Charge-Induced Breakdown Using Electrets at Various Temperatures

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    In medium voltage direct current (MVDC) systems, charge carriers gradually inject into the bulk of a dielectric, leading to space charge accumulation. As more charge carriers inject and accumulate, the effective thickness of a dielectric decreases, reducing the breakdown voltage. This phenomenon intensifies at high temperatures. Our previous research has demonstrated the effectiveness of electrets in mitigating space charge accumulation and space-charge-induced breakdown in dielectric materials via electric field neutralization. However, the impacts of high temperatures have yet to be investigated. This study employs the electret-based electric field neutralization approach to prevent space-charge-induced breakdown at higher temperatures. We peformed numerical analysis using bipolar charge transport models at various temperatures to estimate the effects of using electrets. Then we performed experiments, including instantaneous and delayed breakdown measurements at three different temperatures: 25°C, 50°C, and 75°C. The results of this study demonstrate that electrets effectively prevent charge carrier injection and space-charge-induced breakdown at elevated temperatures.


  • Mitigating Partial Discharge Caused by Steep Voltage Pulses at High Temperatures

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Electrets are dielectric materials that generate electric fields without a voltage source. Our previous studies reported how one could design, fabricate, and utilize electrets to neutralize locally concentrated high electric fields and mitigate partial discharge (PD) in power electronics systems. While the polymer-based electrets used in our prior work demonstrated impressive performance in reducing PD magnitude and rate under recurring, steep voltage transients, the low operating temperature of these materials remained a significant challenge. In this study, we report that inorganic thin film electrets can mitigate PD at high temperatures. This paper reports PD measured under steep square voltage pulses with slew rates as high as 75 V/ns and at temperatures as high as 245°C. The results demonstrate that the inorganic thin film electrets can decrease PD magnitude and increase partial discharge inception voltage (PDIV) in harsh electrical and thermal conditions.


  • Increasing Partial Discharge Inception Voltage at High Temperatures Using Parylene HT Electrets

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Electrets are dielectric materials that generate electric fields independently, without an external voltage source. Our previous studies elucidated the process of designing, fabricating, and employing electrets to counteract locally concentrated high electric fields and mitigate partial discharge (PD) under recurrent, steep voltage pulses. Despite the remarkable performance of the PVDF-based electrets reported in our previous research, the limited temperature range of PVDF remains a significant challenge. To overcome this challenge, this study employs Parylene HT thin film electrets and demonstrates PD mitigation at elevated temperatures. We measured PD under steep square voltage pulses with slew rates as high as 75 V/ns and at temperatures as high as 260°C. The results indicate that Parylene thin film electrets can reduce PD magnitude and increase partial discharge inception voltage (PDIV) in harsh electrical and thermal conditions.


  • Preventing Space-Charge-Induced Breakdown in MVDC Systems by Electric Field Cancellation

    by Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    In medium voltage direct current (MVDC) systems, charge carriers inject into solid insulators, accumulate, and form space charge that distorts electric fields and reduces the effective thickness of dielectric materials. This study proposes an electric field canceling approach to mitigate space charge injection, accumulation, and space-charge-induced dielectric issues. We employ electret films that generate an electric field that counters the system electric field at metal-dielectric interfaces to prevent charge carriers from flowing into electrical insulators. For numerical analysis, a bipolar charge transport model is employed to simulate space charge injection and accumulation behaviors in polyvinylidene fluoride (PVDF) without and with the incorporation of electret films at the interface. Subsequently, instantaneous and delayed breakdown experiments are conducted to validate the results of the numerical analyses. Both results show that electret films hold the charge injection barrier high, thereby reducing space charge injection and increasing dielectric strength. The results of this work demonstrate that electret films can mitigate space charge accumulation and enhance the dielectric integrity of MVDC power systems.


  • CLEAN: Cryogenic Link for Electric Aircraft Propulsion

    by Pradip Chandra Saha, Yanjun Shi, Michael Steurer, Peter Cheetham, Chul Kim, Sastry Pamidi, Jonathan Goldman, Brian German, Zhiyang Jin, Lukas Graber, et al.

    We propose a thermally efficient and power-dense high-temperature superconducting (HTS) cable (CLEAN Cable) as well as a thermally efficient, mechanically rugged, and easily attachable/detachable cryogenic-to-ambient power link (CLEAN Connector). The bundled design enables high gravimetric power density and node-less tapping of power. The CLEAN Connector minimizes ambient heat leaking into the cryogenic environment by magnetically coupling the cryogenic section to the ambient counterpart via a high-frequency isolated DC/DC converter. The proposed high-frequency operation reduces the core size of the cryogenic/ambient transformer that provides electrical and thermal isolation while enabling quick connection. The proposed CLEAN technologies provide the following advantages - (1) Reduced heat load; (2) High gravimetric power density; (3) N –1 system redundancy; (4) Minimum ambient heat leak into the cryogenic system; (5) High vibration/mechanical stress tolerance; (6) Partial discharge (PD) free at high-altitudes; (7) Easy cryogenic and ambient system connection; (8) Inherent fault detection and isolation.


  • Open Access

    Preventing Space Charge Accumulation by Incorporating Electrets

    by Pradip Chandra Saha, Omar Faruqe, Farhina Haque, Chanyeop Park

    Space charge accumulates near electrodes in insulating materials under high voltage direct current. Electric stress created by charge accumulation distorts electric field, reduces the remaining useful life of insulating materials, and decreases partial discharge inception voltage that are critical for ensuring the dielectric integrity of power applications. In this article, a novel approach that mitigates space charge accumulation using electrets is presented. Electrets are used to reduce electric fields that cause charge injection and space charge accumulation in dielectric materials. The validity of using electrets for preventing space charge accumulation is numerically and experimentally demonstrated. Bipolar charge transport model is developed to simulate space charge injection and accumulation in silicone rubber without and with the incorporation of electret. Space charge experiments are performed to confirm the numerical results. The results show that electrets can effectively mitigate space charge accumulation in dielectric materials. The results also show that the incorrect use of electret such as reversing the polarity can lead to more substantial space charge accumulation.