AJAsif Muhammad Juberi

Asif Muhammad Juberi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Asif Muhammad Juberi has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Charge‐Trapping Multilayer Electrets for Partial Discharge Mitigated AlN Substrates

    by Md Nafis Washir, Asif Muhammad Juberi, Chanyeop Park

    High electric fields within power devices can trigger partial discharge (PD), which can gradually degrade insulation materials, such as ceramic substrates and encapsulation compounds. This work counters and reduces electric fields using multilayer thin‐film electret structures incorporating , , , and AlN to mitigate PD in WBG power electronic packages. The proposed thin film structures can be conductively charged, allowing charges to be injected and trapped within the thin film stack. The stored charges generate electric fields and reduce intensified local fields that cause PD. The proposed electret design allows in‐situ conductive charging, unlike previous electrets that required pre‐charging through an external charging system. To evaluate the electric field suppression capabilities, PD measurements were performed under steep (high‐dV/dt), high‐voltage pulse excitations. The results show a decrease in PD activity, indicating a successful electric field reduction. Finite‐element simulation of the measured structure shows that the retained charge reduces the field at the triple point by about 32, and the measured apparent charge decreases in almost all conditions above the inception voltage. Overall, the proposed approach provides a promising way to improve insulation performance in high‐voltage WBG power modules.

  • Preventing Partial Discharge in Motor Winding Under Steep Voltage Pulses Using Functional Capacitive Field-Grading Composites

    by Omar Faruqe, Asif Muhammad Juberi, Pradip Chandra Saha, Chanyeop Park

    Power electronic converters (PEC) fed transformers and motor insulation face a considerable challenge from the non-sinusoidal repetitive steep high-voltage pulses leading to premature breakdown. The increased local electric stresses in the winding insulation cause partial discharge (PD), leading to the degradation and aging of the windings. This study investigates functional capacitive field-grading composites (FCFGC) to prevent the incidence of PD. PD tests are conducted on simplified test objects of motor windings, such as twisted pair samples, subjected to steeply rising square voltage waves. The FCFGC materials are fabricated by dispersing ferroelectric Barium Titanate (BTO) powder into Polydimethylsiloxane (PDMS) matrix. The FCFGC demonstrates higher relative permittivity compared to pure PDMS, and this characteristic also shows dependence on the electric field. The current-voltage (IV) characterization reveals that the electric field dependence of the FCFGC increases as the BTO filler contents are raised. PD experiments are carried out using unipolar square waveforms with slew rate as high as 0.22 kV/ns on enameled twisted pair wires. This involves applying a coating of pure PDMS as well as five distinct FCFGC samples with BTO loadings of 10%, 20%, 30%, 40%, and 50%. Experimental findings indicate that FCFGCs can reduce PD magnitudes and enhance Partial Discharge Inception Voltage (PDIV) compared to neat PDMS insulation. Increasing the BTO filler loading reduces PD magnitudes and increases the PDIV by 2.68 times (i.e., 168%). Additionally, numerical models are employed to conduct electric field analyses of the twisted pair experiments. These models incorporate the field-dependent permittivity of the FCFGC characterized experimentally, providing a more comprehensive understanding of the experimental outcomes.


  • Mitigating Partial Discharge at Low Pressures Using Electrets for All-Electric Aircraft

    by Pradip Chandra Saha, Asif Muhammad Juberi, Omar Faruqe, Chanyeop Park

    High electric fields generate partial discharges (PDs) that degrade electrical insulators at an accelerated rate, posing a greater risk to system reliability. PD can be mitigated by neutralizing the high electric fields using electrets, which create their own electric fields independently. Our previous studies have explored the effectiveness of electrets in mitigating PD under recurrent, steep voltage pulses at high temperatures. However, the mitigation of PD using electrets at low pressures and high temperatures remains unexplored. In this study, we demonstrate that Parylene high temperature (HT) thin-film electrets effectively mitigate PD at low pressures and high temperatures. We measured PD under steep square voltage pulses with slew rates as high as 68.75 V/ns, at pressures as low as 20 kPa, and at temperatures up to $260~^{\circ }$ C. The results indicate that Parylene thin-film electrets can reduce PD magnitude and increase PD inception voltage (PDIV) in harsh electrical and thermal conditions at low pressures.


  • Partial Discharge Characteristics of SiO₂/Si₃N₄ Electret Incorporated AlN Substrates

    by Asif Muhammad Juberi, Pradip Chandra Saha, Omar Faruqe, Chanyeop Park

    Partial discharge (PD) is one of the main reasons for the degradation of dielectric material and insulation of power semiconductors and systems they drive. Subsequently, it is a challenge for the electrification of transportation systems, including ships. In recent years, electret, which can generate an electric field without an external voltage source, has been used to mitigate PD. Research on electrets shows fabricating and employing electrets to counteract locally concentrated high electric fields and mitigate PD under recurrent, steep voltage pulses generated by wide bandgap (WBG) power semiconductors. In most of the studies that used electret material to mitigate PD, it was coated on a metal substrate. However, in our study, we used a thin 520 nm SiO 2 /Si 3 N 4 double-layer electret on a ceramic substrate made of aluminum nitride (AlN) instead of metal. PD was measured under steep square voltage pulses with slew rates as high as 131.25 V/ns and at temperatures as high as 180°C. We measured PD magnitude and partial discharge inception voltage (PDIV). The results indicate that AlN substrates coated with SiO 2 /Si 3 N 4 thin film electrets can reduce PD magnitude and increase PDIV in harsh electrical and thermal conditions.