TLTie Li

Tie Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tie Li has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Experimental Validation of an Adjustable High-Voltage Test Fixture for Dielectric Strength Characterization of Magnesium Oxide Powder

    by Jing Ni, Shengchuan Shi, Bin Gao, You Fu, Shuo Zhang, Pengbo Chen, Tie Li

    Magnesium oxide (MgO) powder is widely used as an electrical insulating medium in high-temperature electrical systems; however, reproducible dielectric breakdown characterization remains challenging because the measured response is sensitive to powder-layer thickness, packing state, and electrode configuration. In this study, an adjustable high-voltage test fixture is developed for controlled comparative breakdown testing of loose MgO powder. The fixture integrates an adjustable electrode mechanism, a confined powder chamber, and rounded electrode edges to improve the controllability of the test geometry. An axisymmetric finite difference method (FDM) model was first established to investigate the electric-field distribution at electrode gaps of 2, 3, 5, and 10 mm, and a finite element method (FEM) model in COMSOL Multiphysics was subsequently used for independent numerical comparison. A CNC-machined prototype was experimentally evaluated using MgO powders with different mesh grades at powder-layer thicknesses of 2 and 3 mm. Under controlled ambient conditions, the measured breakdown voltage varied with both powder-layer thickness and mesh grade. Among the investigated powders, the 200-mesh MgO sample exhibited the highest measured breakdown voltage, reaching 5.54 kV at 2 mm and 6.98 kV at 3 mm, corresponding to apparent breakdown field strengths of 2.77 and approximately 2.33 MV·m−1, respectively. These results demonstrate the feasibility of the proposed fixture for controlled comparative breakdown characterization of loose MgO powder.

  • Open Access

    Variations in Oil Occurrence State and Properties during High-Speed Stirring Treatment of Oily Sludge

    by Yuwei Bao, Yimin Zhu, Yang Liu, Jiao Zhao, Xiaojia Tang, Tie Li, Yin Wang, Xianmeng Liu, Hao Zhang

    Oily sludge (OS) has long been regarded as a hazardous waste, and improper disposal may lead to serious environmental concerns and human health risks. Despite various methods having been proposed and applied to the treatment of OS, the oil occurrence states and properties in sludge are rarely characterized, which may directly link to the selection and effectiveness of treatment methods. Here, confocal laser scanning microscopy (CLSM), X-ray diffraction (XRD), gas chromatography (GC), and four components (SARA) analysis were utilized to characterize the changes in the oil occurrence states and compositions in OS samples before and after high-speed stirring (HSS) treatment. Our results show a substantial reduction in the oil concentration of OS after HSS treatment (from 32.98% to 1.65%), while SARA analysis reveals a similar oil composition before and after treatment, suggesting the broad applicability of HSS in removing oil and its insignificant selectivity towards various hydrocarbon components. This is further supported by the total petroleum hydrocarbon (TPH) analysis results, which show that the separated oil phase has a hydrocarbon composition similar to that of the original OS sample. The CLSM and fluorescence analysis suggest a homogeneous distribution of oil in the sludge, with relatively light components more concentrated in the pore systems between coarse mineral particles, whereas relatively heavy components tend to coexist with clay minerals. After HSS cleaning, both light and heavy components are removed to varying degrees, but light components are preferentially removed while heavy components tend to be retained in the sludge due to adsorption by clay minerals. This is consistent with TPH analysis, where a significant decrease in n-alkanes with lower carbon numbers (n-C14 to n-C20) was observed in the residual sample. Our findings demonstrate the dynamic response of oil occurrence states and compositions to the OS treatment process and highlight the importance of characterizing these fundamental properties prior to the selection of OS treatment methods.


  • Open Access

    Particulate Matter (PM) and Parent, Nitrated and Oxygenated Polycyclic Aromatic Hydrocarbon (PAH) Emissions of Emulsified Heavy Fuel Oil in Marine Low-Speed Main Engine

    by Penghao Su, Hanzhe Zhang, Liming Peng, Lihong Zhu, Tie Li, Xiaojia Tang, Yimin Zhu

    To understand the influences of emulsified fuel on ship exhaust emissions more comprehensively, the emissions of particulate matter (PM), nitrated, oxygenated and parent polycyclic aromatic hydrocarbons (PAHs) were studied on a ship main engine burning emulsified heavy fuel oil (EHFO) and heavy fuel oil (HFO) as a reference. The results demonstrate that EHFO (emulsified heavy fuel oil) exhibits notable abilities to significantly reduce emissions of particulate matter (PM) and low molecular weight PAHs (polycyclic aromatic hydrocarbons) in the gas phase, particularly showcasing maximum reductions of 13.99% and 40.5%, respectively. Nevertheless, burning EHFO could increase the emission of high molecular weight PAHs in fine particles and pose a consequent higher carcinogenic risk for individual particles. The total average (gaseous plus particulate) ΣBEQ of EHFO exhausts (41.5 μg/m3) was generally higher than that of HFO exhausts (18.7 μg/m3). Additionally, the combustion of EHFO (extra-heavy fuel oil) can significantly alter the emission quantity, composition, and particle-size distribution of PAH derivatives. These changes may be linked to molecular structures, such as zigzag configurations in C=O bonds. Our findings may favor the comprehensive environmental assessments on the onboard application of EHFO.


  • Open Access

    Simulation Study on the Process of Cleaning Oily Sludge with High-speed Stirring Rotor

    by Yin Wang, Keqing Li, Jiao Zhao, Xiaojia Tang, Tie Li, Xianmeng Liu, Hao Zhang, Yimin Zhu

    In this paper, COMSOL Multiphysics software was used to simulate and analyze the process of cleaning oily sludge by high-speed stirring rotor. The physical phenomena such as velocity field, pressure field, heat dissipation and cavitation generated by the rotor during the process of the oily sludge cleaning were analyzed. The results showed that in the process of cleaning the oily sludge by high-speed stirring rotor, the shear force, heat dissipation and pressure increased with the enhance in the rotor speed. Cavitation occurs in the impeller area of the rotor because of the change of pressure, so the cavitation bubbles were formed. Shear force, heat dissipation and cavitation contributed to the separation of oil phase in oily sludge. Meanwhile, the simulation results were verified by experiments.

  • Open Access

    Highly Efficient Treatment of Oily Sludge by a Novel High-Speed Stirring Method at Room Temperature

    by Yimin Zhu, Keqing Li, Yin Wang, Jiao Zhao, Xiaojia Tang, Tie Li, Chenming Zhang

    Oily sludge is one of the main hazardous wastes which seriously endangers the ecological environment and human health. In this paper, in order to effectively treat oily sludge, a novel high-speed stirring (HSS) method was proposed to clean oily sludge, and the main parameters affecting the residual oil rate of oily sludge were studied experimentally. Firstly, the cleaning time and stirring speed were optimized in the one-stage HSS cleaning, and then the optimal cleaning time of two-stage HSS cleaning was determined by the response surface method. The results suggested that the oil can be efficiently separated by high-speed stirring at room temperature, and that the two-stage cleaning with a circular-hole outlet (Rotor-C) followed by a vertical hole-outlet (Rotor-V) presented the best effect. The optimal stirring speed was 6000 r/min, and the optimal cleaning times of the two-stage cleaning were 7 min and 8 min, respectively. After cleaning, the residual oil rate of the treated oily sludge was 1.65%, and the removal rate of the petroleum hydrocarbons was 84.3%.


  • Modeling and prediction for the oxidation efficiency of magnesium sulfite in aeration tank of magnesium-based seawater exhaust gas clean system

    by Quan Liu, Yimin Zhu, Tie Li, Xiaojia Tang, Weifeng Liu, Lin Guo, Jiao Zhao

    In magnesium-based seawater exhaust gas clean system, the desulfurization by-product, magnesium sulfite (MgSO3), has a negative impact on the ecological environment, which needs to be treated to make harmless. Due to the limited space on board, the aeration oxidation method is used to convert it to magnesium sulfate. Because of the variable size, shape and flow field of aeration tank, it is difficult and expensive to design and verify the oxidation efficiency of the aeration tank by experimental method. In this work, in order to predict the oxidation efficiency accurately, RFlow, a computational fluid dynamics software, was used to analyze the flow field and MgSO3 oxidation reaction in aeration tank. The subdomain technology was adopted for physics modeling and mesh generation of the aeration tank, and the total number of meshes was 285,000. The multi-phase flow field model was set up using the multi-fluid model and dispersive k-ε turbulence model. Under the given initial conditions, the predicted oxidation efficiency was 94.2%. Compared with the results of the actual ship test, the prediction model for MgSO3 oxidation efficiency of the aeration tank is reliable.