P. Bilym
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
P. Bilym has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Anatoliy Rogozin
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publications - Pavlo Firsov
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publications - V. Zaichenko
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publications Р. Bilym
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publicationsA. Rohozin
O.M. Beketov National University of Urban Economy in Kharkiv
1 shared publication- Dmytro Petrenko
O.M. Beketov National University of Urban Economy in Kharkiv
1 shared publication
Latest Publications
- Open Access
- 5 April 2024
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (182) , 55–60
STUDY OF THE EFFECT OF HALOGENATED FIRE RETARDANTS ON REDUCING THE FLAMMABILITY OF COMPOSITE REINFORCEMENT
The article is devoted to the issue of reducing the flammability of fiberglass composite reinforcement, which is obtained based on an epoxy anhydride binder by the needle extrusion method. The authors applied halogenated epoxy resins based on tetrabromobisphenol A and chlorine-containing resin EHD (N,N-tetraglycidyl-3,3′-dichloro-4,4′-diaminodiphenylmethane) as flame retardant components (modifiers). We controlled the degree of transformation (passage of the polyaddition reaction) of epoxy systems exposed to heat under the technology conditions by the method of sol-gel analysis. The conducted research established the ability of halogenated flame retardants not to exert a directed effect on reducing the flammability of composite reinforcement obtained in the short-term mode of formation. Under these conditions, the composition of the epoxy anhydride binder is of great importance, considering the ratio of epoxy and anhydride groups in the reaction system. We determined that to achieve an increased oxygen index and a relative decrease in the flammability of composite reinforcement in the conditions of a short-term hardening regime, a small addition of flame retardant, which contains only chlorine-containing oligomer EHD, is necessary. In this particular case, we observed a characteristic anti-plasticising effect, which leads to the preservation of the modulus of elasticity of the composite material and a decrease in the flammability of the composite. With a further increase in the amount of the antipyretic modifier, structural transformations occur at the supramolecular level, which possibly prolongs the distance between the mesh nodes of the hardened matrix of the composite and contributes to a decrease in its modulus of elasticity and loss of its ability to inhibit the spontaneous combustion reaction. As a result of the plasticising effect at the supramolecular level, molecules surround the internodal structural elements of the polymer. It leads not only to a decrease in the interaction between the macromolecules of the epoxy polymer but also to an increase in the diffusion characteristics of the entire system. Keywords: fibreglass composite reinforcement, flammability, oxygen index, halogenated fire retardant.
- 5 April 2024
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (182) , 55–60
Open AccessSTUDY OF THE EFFECT OF HALOGENATED FIRE RETARDANTS ON REDUCING THE FLAMMABILITY OF COMPOSITE REINFORCEMENT
The article is devoted to the issue of reducing the flammability of fiberglass composite reinforcement, which is obtained based on an epoxy anhydride binder by the needle extrusion method. The authors applied halogenated epoxy resins based on tetrabromobisphenol A and chlorine-containing resin EHD (N,N-tetraglycidyl-3,3′-dichloro-4,4′-diaminodiphenylmethane) as flame retardant components (modifiers). We controlled the degree of transformation (passage of the polyaddition reaction) of epoxy systems exposed to heat under the technology conditions by the method of sol-gel analysis. The conducted research established the ability of halogenated flame retardants not to exert a directed effect on reducing the flammability of composite reinforcement obtained in the short-term mode of formation. Under these conditions, the composition of the epoxy anhydride binder is of great importance, considering the ratio of epoxy and anhydride groups in the reaction system. We determined that to achieve an increased oxygen index and a relative decrease in the flammability of composite reinforcement in the conditions of a short-term hardening regime, a small addition of flame retardant, which contains only chlorine-containing oligomer EHD, is necessary. In this particular case, we observed a characteristic anti-plasticising effect, which leads to the preservation of the modulus of elasticity of the composite material and a decrease in the flammability of the composite. With a further increase in the amount of the antipyretic modifier, structural transformations occur at the supramolecular level, which possibly prolongs the distance between the mesh nodes of the hardened matrix of the composite and contributes to a decrease in its modulus of elasticity and loss of its ability to inhibit the spontaneous combustion reaction. As a result of the plasticising effect at the supramolecular level, molecules surround the internodal structural elements of the polymer. It leads not only to a decrease in the interaction between the macromolecules of the epoxy polymer but also to an increase in the diffusion characteristics of the entire system. Keywords: fibreglass composite reinforcement, flammability, oxygen index, halogenated fire retardant.
- Open Access
- 3 April 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (175) , 202-207
REQUIREMENTS FOR HAZARD ANALYSIS MODELS AND CALCULATIONS DEGREE OF RISK
Based on statistical data, the main reasons for the low level of labor protection organization in Ukraine are formulated. In recent years, there has been a sharp increase in cases of industrial injuries. UAH 334 million was spent on monthly insurance payments to families who lost breadwinners. for temporary incapacity for work due to an accident or occupational disease - UAH 138.1 million. The data presented in the article indicate that the main causes of fatal accidents are organizational, psychophysical, technogenic, and technical. The main reasons for the low level of labor protection organization in Ukraine are given by the authors, who say that in today's conditions, the labor protection management system should be based not only on measures from the state, but also on the interest of the subjects of labor relations in maintaining the proper physical condition of the employee. A real health risk assessment is impossible without a sufficient information base on the quantitative and qualitative characteristics of risk factors and data on the health status of those contingents of the population that are exposed to these factors. The effect of potentiating with the combined influence of professional and non-professional factors has been established. Therefore, there was a need to develop new methods of analysis and modeling of the conditional probability of the occurrence of an industrial injury, acceptable for practical engineering calculations. The proposed indicators of the level of ensuring the safety of people at the objects are the probability of preventing exposure to dangerous factors of the production environment and work process, which can be determined by the full risk of an accident. Thus, on the basis of the application of the probabilistic method for modeling the conditional probability of injury to an employee during technological operations, an assessment of the probability of an accident and the development of various variants of dangerous situations was carried out. This will make it possible to get an assessment of the circumstances and conditions that contribute to the occurrence and development of traumatic situations at work. Keywords: labor protection, occupational injuries, industrial environment, accident, risk, danger, harmfulness, probability.
- 3 April 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (175) , 202-207
Open AccessREQUIREMENTS FOR HAZARD ANALYSIS MODELS AND CALCULATIONS DEGREE OF RISK
Based on statistical data, the main reasons for the low level of labor protection organization in Ukraine are formulated. In recent years, there has been a sharp increase in cases of industrial injuries. UAH 334 million was spent on monthly insurance payments to families who lost breadwinners. for temporary incapacity for work due to an accident or occupational disease - UAH 138.1 million. The data presented in the article indicate that the main causes of fatal accidents are organizational, psychophysical, technogenic, and technical. The main reasons for the low level of labor protection organization in Ukraine are given by the authors, who say that in today's conditions, the labor protection management system should be based not only on measures from the state, but also on the interest of the subjects of labor relations in maintaining the proper physical condition of the employee. A real health risk assessment is impossible without a sufficient information base on the quantitative and qualitative characteristics of risk factors and data on the health status of those contingents of the population that are exposed to these factors. The effect of potentiating with the combined influence of professional and non-professional factors has been established. Therefore, there was a need to develop new methods of analysis and modeling of the conditional probability of the occurrence of an industrial injury, acceptable for practical engineering calculations. The proposed indicators of the level of ensuring the safety of people at the objects are the probability of preventing exposure to dangerous factors of the production environment and work process, which can be determined by the full risk of an accident. Thus, on the basis of the application of the probabilistic method for modeling the conditional probability of injury to an employee during technological operations, an assessment of the probability of an accident and the development of various variants of dangerous situations was carried out. This will make it possible to get an assessment of the circumstances and conditions that contribute to the occurrence and development of traumatic situations at work. Keywords: labor protection, occupational injuries, industrial environment, accident, risk, danger, harmfulness, probability.
- Open Access
- 3 April 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (175) , 47-51
INCREASING OF THE CORROSION RESISTANCE OF FIBERGLASS PLASTIC REINFORCEMENT THROUGH MODIFICATION OF THE POLYMER BINDER
The issue of increasing the corrosion resistance of composite reinforcement, based on glass fiber and epoxy anhydride binder, is considered. The proposed samples of composite reinforcement were manufactured by needle extrusion technology. Glass fibers were evenly distributed in the channels and impregnated with a polymer binder based on epoxy resin. The amount of phenolic modifier in the polymer binder, according to the technological mode of obtaining composite reinforcement, was brought up to 5%. With a further increase in the content of the modifier, the degree of conversion of epoxy groups was no more than 70%, which sharply reduced the operational characteristics of the material. The overall ratio of polymer binder and glass reinforcement in the composite was ~ 60÷40. It was established that at low concentrations of the polymer modifier (up to 5 wt. parts), the processes of ordering and chemical grafting lead to compaction of the molecular grouping in the system, which in our case is characteristic of phenolic resins of the novolach and resol types. At the same time, under the conditions of the production technology, internal stresses in materials of this type increase sharply, which leads to the formation of surface defects (microcracks). At the tip of a crack or defect, sodium ions or other cations under the action of water undergo hydrolysis to form metal hydroxide, which, in turn, causes hydrolysis of siloxane bonds, thus weakening the mesh structure of silicon dioxide. The experimental activation energy was identified with the activation energy of sodium ion diffusion in the glass mass. But the plastic deformation of the glass in the region before the crack is very small, and instead of a uniform distribution of stress, the material cracks along the weakened centers The obtained data indicate that the action of the alkaline environment causes an increased loss of mass of the composite, both for the unmodified and for those modified with traditional phenolic resins. In turn, this ensures a high degree of penetration of alkalis into the volume of the material, access to reinforced fibers with their subsequent damage. To increase the corrosion resistance of composite reinforcement based on an epoxy anhydride binder, it is advisable to use a reactive sulfur-containing phenolic modifier. Its action is based on the ability to maintain the permissible monolithicity of fiberglass in the alkaline environment of concrete, the modulus of elasticity and necessary strength. Keywords: composite polymer reinforcement, fiberglass, alkaline environment, phenolic modifier.
- 3 April 2023
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 1 (175) , 47-51
Open AccessINCREASING OF THE CORROSION RESISTANCE OF FIBERGLASS PLASTIC REINFORCEMENT THROUGH MODIFICATION OF THE POLYMER BINDER
The issue of increasing the corrosion resistance of composite reinforcement, based on glass fiber and epoxy anhydride binder, is considered. The proposed samples of composite reinforcement were manufactured by needle extrusion technology. Glass fibers were evenly distributed in the channels and impregnated with a polymer binder based on epoxy resin. The amount of phenolic modifier in the polymer binder, according to the technological mode of obtaining composite reinforcement, was brought up to 5%. With a further increase in the content of the modifier, the degree of conversion of epoxy groups was no more than 70%, which sharply reduced the operational characteristics of the material. The overall ratio of polymer binder and glass reinforcement in the composite was ~ 60÷40. It was established that at low concentrations of the polymer modifier (up to 5 wt. parts), the processes of ordering and chemical grafting lead to compaction of the molecular grouping in the system, which in our case is characteristic of phenolic resins of the novolach and resol types. At the same time, under the conditions of the production technology, internal stresses in materials of this type increase sharply, which leads to the formation of surface defects (microcracks). At the tip of a crack or defect, sodium ions or other cations under the action of water undergo hydrolysis to form metal hydroxide, which, in turn, causes hydrolysis of siloxane bonds, thus weakening the mesh structure of silicon dioxide. The experimental activation energy was identified with the activation energy of sodium ion diffusion in the glass mass. But the plastic deformation of the glass in the region before the crack is very small, and instead of a uniform distribution of stress, the material cracks along the weakened centers The obtained data indicate that the action of the alkaline environment causes an increased loss of mass of the composite, both for the unmodified and for those modified with traditional phenolic resins. In turn, this ensures a high degree of penetration of alkalis into the volume of the material, access to reinforced fibers with their subsequent damage. To increase the corrosion resistance of composite reinforcement based on an epoxy anhydride binder, it is advisable to use a reactive sulfur-containing phenolic modifier. Its action is based on the ability to maintain the permissible monolithicity of fiberglass in the alkaline environment of concrete, the modulus of elasticity and necessary strength. Keywords: composite polymer reinforcement, fiberglass, alkaline environment, phenolic modifier.
- Open Access
- 16 December 2022
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 6 (173) , 178-182
MODELING OF VIBROACOUSTIC PROCESSES IN TRANSPORTATION CABINS
In the closed rooms of small buildings, and in the cabins of flexible transport vehicles, there is a very specific process of developing both structural and occasional noise. Dzherela noise and vibrations on transport means it is cleverly possible to change on mechanical, aerodynamic, hydro mechanical, electromagnet and inch. Operators of a large number of transport vehicles - emergency and road vehicles, vantage cars, assistance for transporting passengers and others. Noise of 85 - 95 dB A. Vikoristannya traditional and effective, from the point of view of the noise control operator, designs that are not rimmed with rosary do not expect to give results. In some cases, it can lead to a retype і, besides; it is not enough to pay off financial investments. By the method of cinch doslidzhen є theoretically setting up the noise reduction processes in closed small-volume applications (in the cabins of transport vehicles) with the purpose of entering and using the noise mode on the operator's workstation. The task of the data is studied in the development of a mathematical model for the analysis of vibroacoustic parameters with the method of development of rational noise protection for operators of transport facilities. The reduction of the noise level at the operator's working station is mainly due to the additional structural elements of the cabin, hoods, screens, and they can include a number of soundproof clay structures in their line of work. Structural noise is transmitted to the cabin due to the vibrations of the walls and cabin sub-logs. Intensity and proportion of the noise to fall due to the structural sound of the connection between the elements of the cabin and the vibrations. The presence of gaps, breaks, and openings also affects the noise mode of operators. For minds, the use of a small volume with an accuracy sufficient for practice (± 2 dB) equal to the noise in the operator's work area can be developed on the basis of the energy law of sound folding. Keywords: sound, noise, vibration, vibration isolation, frequency, transport, sound pressure, sound clinging, rigidity of construction, sound field, acoustic screens.
- 16 December 2022
- Published by O.M.Beketov National University of Urban Economy in Kharkiv in Municipal economy of cities
- Vol. 6 (173) , 178-182
Open AccessMODELING OF VIBROACOUSTIC PROCESSES IN TRANSPORTATION CABINS
In the closed rooms of small buildings, and in the cabins of flexible transport vehicles, there is a very specific process of developing both structural and occasional noise. Dzherela noise and vibrations on transport means it is cleverly possible to change on mechanical, aerodynamic, hydro mechanical, electromagnet and inch. Operators of a large number of transport vehicles - emergency and road vehicles, vantage cars, assistance for transporting passengers and others. Noise of 85 - 95 dB A. Vikoristannya traditional and effective, from the point of view of the noise control operator, designs that are not rimmed with rosary do not expect to give results. In some cases, it can lead to a retype і, besides; it is not enough to pay off financial investments. By the method of cinch doslidzhen є theoretically setting up the noise reduction processes in closed small-volume applications (in the cabins of transport vehicles) with the purpose of entering and using the noise mode on the operator's workstation. The task of the data is studied in the development of a mathematical model for the analysis of vibroacoustic parameters with the method of development of rational noise protection for operators of transport facilities. The reduction of the noise level at the operator's working station is mainly due to the additional structural elements of the cabin, hoods, screens, and they can include a number of soundproof clay structures in their line of work. Structural noise is transmitted to the cabin due to the vibrations of the walls and cabin sub-logs. Intensity and proportion of the noise to fall due to the structural sound of the connection between the elements of the cabin and the vibrations. The presence of gaps, breaks, and openings also affects the noise mode of operators. For minds, the use of a small volume with an accuracy sufficient for practice (± 2 dB) equal to the noise in the operator's work area can be developed on the basis of the energy law of sound folding. Keywords: sound, noise, vibration, vibration isolation, frequency, transport, sound pressure, sound clinging, rigidity of construction, sound field, acoustic screens.