SGSargis Gabayan

Sargis Gabayan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sargis Gabayan has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • ALGORITHM FOR CALCULATION AND OPTIMIZATION OF SEDIMENTATION BASIN STRUCTURES FOR SMALL HYDROPOWER PLANTS

    by Sargis Gabayan

    The paper addresses the optimization of geometric and cost parameters of sedimentation basins for small hydropower plants (SHPPs) operating on mountainous rivers. It is shown that widely used design solutions with variable geometry of sedimentation chambers are often due to the lack of a comprehensive methodology for the coordinated calculation of all elements of the structure and are not always economically optimal. A systematic approach to the design of SHPP sedimentation basins is proposed, based on maintaining design flow velocities and using a constant chamber width. Based on a generalized analysis of calculation results for various values of discharge, chamber width, and captured particle sizes, a parametric model of the volume of monolithic reinforced concrete of the sedimentation basin is obtained in the form of a power-law function of the main governing factors. The paper substantiates the selection of the maximum allowable particle size based on physical principles of abrasive erosion and the concept of hydraulic sedimentation velocity. A comparative analysis of different methods for calculating hydraulic sedimentation velocity (Stokes, Goncharov, Arkhangelsky, Rubey, Ferguson–Church) is performed for particle sizes typical of mountain rivers. To assess capital costs, an aggregated cost model is developed that relates the construction cost of the sedimentation basin to the volume of reinforced concrete and a regional cost index for 1 m³ of monolithic reinforced concrete. The results of the study can be used in the design and techno-economic justification of SHPP sedimentation basins, as well as in the development of unified methodologies for the optimal selection of their geometric parameters taking into account hydraulic and economic factors.

  • OPTIMIZING PARALLEL OPERATION OF AGGREGATES EQUIPPED WITH CROSSFLOW TURBINES

    by Sargis Gabayan

    The paper addresses the issue of optimizing the parallel operation of two identical hydropower aggregates equipped with Crossflow turbines under variable water flow conditions. The objective of the study is to determine the optimal distribution of the plant total flow between the aggregates that maximizes the capacity at a given flow rate. The optimization is formulated using the method of Lagrange multipliers, with the objective function proportional to the hydraulic capacity under constant head conditions. It is shown that when the plant flow does not exceed the nominal flow of one aggregate, the maximum capacity is achieved by operating only one turbine, and no dispatching control is required. In the range of parallel operation of two aggregates, a nontrivial optimization problem arises. Numerical analysis based on manufacturer performance curves of Crossflow turbines demonstrates that the maximum total capacity in this operating zone is achieved when the flow is evenly distributed between the two aggregates. The reduction in efficiency observed for strongly asymmetric flow distributions is explained by the sharp decrease in turbine efficiency at low relative flows, which is characteristic of Crossflow turbines. The obtained results provide a theoretical justification for practical operating rules of small hydropower plants with Crossflow turbines and can be applied in the design and operation of control systems for such facilities.

  • DESIGN AND OPERATIONAL FEATURES OF TRASH RACKS FOR SMALL HYDROPOWER PLANTS ON MOUNTAIN RIVERS

    by Sargis Gabayan

    The article examines the specific aspects of designing trash racks for small hydropower plants (SHPs) operating on mountain rivers characterized by high turbidity and strong seasonal flow variability. Dependencies to automate the selection of the optimal bar spacing of trash racks are presented depending on the type of installed turbines, based on the recommendations of SHP equipment manufacturers. Empirical relationships and guidelines for the hydraulic parameters of racks are proposed, taking into account operational conditions in mountainous areas. A critical review of existing design recommendations for racks used on high-altitude rivers is also provided.

  • ANALYSIS OF THE EFFICIENCY OF OPERATION OF SMALL HYDRO POWER PLANTS EQUIPPED WITH CROSSFLOW TURBINES

    by Grigor Gabayan, Vache Tokmajyan, Sargis Gabayan, Armen Babayan, Gagik Poghosyan

    When selecting sites for a SHPP, it is critical to select the appropriate type of turbines to be installed and estimate the plant's expected yearly output. We have analyzed the efficiency of the Crosflo flow type turbine, which has gained popularity in recent years. In this paper dependencies have been identified that determine the efficiency of each element of the unit, depending on the water flow, the plant's pressure, and the unit's power The carried out study enables the automation of computations for determining the output of the plant equipped with flow type turbines.