David Gold
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
David Gold has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Richard Jones
Intel Corporation, Santa Clara, CA, USA
5 shared publications Chenyang Wu
Intel Corporation, Santa Clara, CA, USA
3 shared publications- Haisheng Rong
Intel Corporation, Santa Clara, CA, USA
3 shared publications Jordan Davis
Intel Corporation, Santa Clara, CA, USA
3 shared publicationsKalyan Sikder
Intel Corporation, Santa Clara, CA, USA
3 shared publications- Karan Mehta
Intel Corporation, Santa Clara, CA, USA
3 shared publications
Latest Publications
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 37 (20) , 1177-1180
Heterogeneously Integrated III-V/Silicon C-Band Tunable Lasers on 300-mm Silicon Photonic Wafers
We demonstrate a heterogeneously integrated III-V/Si tunable laser fabricated on a 300-mm silicon photonics platform, achieving a wide tuning range from 1510 to 1570 nm with a side-mode suppression ratio (SMSR) above 50 dB, a Lorentzian linewidth below 30 kHz, and relative intensity noise less than −150 dBc/Hz. This laser delivers on-chip optical power exceeding 20 mW at 100 mA of bias current with low variability across a wafer. With closed-loop control, the laser frequency stability is maintained within ±1 GHz. This tunable laser can be readily integrated with other photonic components, such as wavelength lockers, modulators, and detectors, enabling fully integrated photonic chips for optical communications, sensing, and next-generation computing applications.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 37 (20) , 1177-1180
Heterogeneously Integrated III-V/Silicon C-Band Tunable Lasers on 300-mm Silicon Photonic Wafers
We demonstrate a heterogeneously integrated III-V/Si tunable laser fabricated on a 300-mm silicon photonics platform, achieving a wide tuning range from 1510 to 1570 nm with a side-mode suppression ratio (SMSR) above 50 dB, a Lorentzian linewidth below 30 kHz, and relative intensity noise less than −150 dBc/Hz. This laser delivers on-chip optical power exceeding 20 mW at 100 mA of bias current with low variability across a wafer. With closed-loop control, the laser frequency stability is maintained within ±1 GHz. This tunable laser can be readily integrated with other photonic components, such as wavelength lockers, modulators, and detectors, enabling fully integrated photonic chips for optical communications, sensing, and next-generation computing applications.
- 1 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3314-3319
Fully Integrated Tunable III-V/Si Laser With On-Chip SOA
Silicon-photonics based high volume manufacturable lasers are playing an increasingly important role in optical communication and sensing due to their low-cost, high performance, and seamless integration with other silicon photonics components. Here we demonstrate a silicon-photonics based widely tunable laser with integrated semiconductor optical amplifier (SOA) and wavelength reference on a high-volume, 300-mm III-V/Si integration platform. The laser shows a tuning range >50 nm with side-mode suppression ratio >55 dB, Lorentzian linewidth <30 kHz, and relative intensity noise (RIN) <−150 dB/Hz across the entire tuning range. We also demonstrate an active control of the laser. When locked to an external wavelength reference, the laser shows a frequency error <1 GHz against changes to the chip temperature. Amplified by an SOA, the on-chip optical power exceeds 17 dBm. Such tunable lasers can be integrated with other silicon-based photonic components including high-speed modulators and detectors for a variety of applications, ranging from optical communication to sensing.
- 1 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3314-3319
Fully Integrated Tunable III-V/Si Laser With On-Chip SOA
Silicon-photonics based high volume manufacturable lasers are playing an increasingly important role in optical communication and sensing due to their low-cost, high performance, and seamless integration with other silicon photonics components. Here we demonstrate a silicon-photonics based widely tunable laser with integrated semiconductor optical amplifier (SOA) and wavelength reference on a high-volume, 300-mm III-V/Si integration platform. The laser shows a tuning range >50 nm with side-mode suppression ratio >55 dB, Lorentzian linewidth <30 kHz, and relative intensity noise (RIN) <−150 dB/Hz across the entire tuning range. We also demonstrate an active control of the laser. When locked to an external wavelength reference, the laser shows a frequency error <1 GHz against changes to the chip temperature. Amplified by an SOA, the on-chip optical power exceeds 17 dBm. Such tunable lasers can be integrated with other silicon-based photonic components including high-speed modulators and detectors for a variety of applications, ranging from optical communication to sensing.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3300-3305
Measurement of the Nonlinear Loss and Effective Free Carrier Lifetime in Silicon Microring Resonators
A methodology is presented to characterize the nonlinear absorption loss coefficient and the effective free carrier lifetime in silicon ring resonators at high intra-ring optical power density. The proposed methodology uses a continuous-wave pump-probe measurement to capture distortion-free transmission spectra in the regime of nonlinear absorption. The measured nonlinear loss coefficient using this method is 30–40% higher than that obtained with a single high-power continuous-wave laser. The pump-probe measurement also reveals that the optical loss sharply increases beyond ∼11.6 mW in the bus waveguide for the ring design with the highest quality-factor, most likely due to the saturation of trap states by electrons and holes generated by two-photon absorption.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3300-3305
Measurement of the Nonlinear Loss and Effective Free Carrier Lifetime in Silicon Microring Resonators
A methodology is presented to characterize the nonlinear absorption loss coefficient and the effective free carrier lifetime in silicon ring resonators at high intra-ring optical power density. The proposed methodology uses a continuous-wave pump-probe measurement to capture distortion-free transmission spectra in the regime of nonlinear absorption. The measured nonlinear loss coefficient using this method is 30–40% higher than that obtained with a single high-power continuous-wave laser. The pump-probe measurement also reveals that the optical loss sharply increases beyond ∼11.6 mW in the bus waveguide for the ring design with the highest quality-factor, most likely due to the saturation of trap states by electrons and holes generated by two-photon absorption.
- 15 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (7) , 365-368
High-Power Heterogeneously Integrated III-V/Silicon Superluminescent Diode
We demonstrate heterogeneously integrated O-band superluminescent diodes (SLDs) emitting 10 mW of continuous-wave output power at a device temperature of up to 65 °C. At 10 mW output power, the SLD has a wall-plug efficiency of 3.1% at 25 °C and 1.3% at 65 °C; a 3-dB optical bandwidth of 20–30 nm; and spectral modulation (ripple amplitude) of 0.13 (1.1 dB) at 25 °C and 0.09 (0.8 dB) at 65 °C. This is the highest reported output power and efficiency for a SLD integrated with silicon by more than one order of magnitude, which opens up new applications for cheaper and more compact SLD-based photonics integrated circuits.
- 15 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (7) , 365-368
High-Power Heterogeneously Integrated III-V/Silicon Superluminescent Diode
We demonstrate heterogeneously integrated O-band superluminescent diodes (SLDs) emitting 10 mW of continuous-wave output power at a device temperature of up to 65 °C. At 10 mW output power, the SLD has a wall-plug efficiency of 3.1% at 25 °C and 1.3% at 65 °C; a 3-dB optical bandwidth of 20–30 nm; and spectral modulation (ripple amplitude) of 0.13 (1.1 dB) at 25 °C and 0.09 (0.8 dB) at 65 °C. This is the highest reported output power and efficiency for a SLD integrated with silicon by more than one order of magnitude, which opens up new applications for cheaper and more compact SLD-based photonics integrated circuits.
- 1 January 2023
- Published by Optica Publishing Group
- p. ATh5A.6
Heterogeneously Integrated Hybrid III-V/Silicon Superluminescent Diode with >10 mW Output Power
We demonstrate an O-band on-chip superluminescent diode emitting 10 mW broadband output power at 65 °C with a ripple amplitude of 0.8 dB. This is the highest reported power and efficiency for an on-chip SLD.
- 1 January 2023
- Published by Optica Publishing Group
- p. ATh5A.6
Heterogeneously Integrated Hybrid III-V/Silicon Superluminescent Diode with >10 mW Output Power
We demonstrate an O-band on-chip superluminescent diode emitting 10 mW broadband output power at 65 °C with a ripple amplitude of 0.8 dB. This is the highest reported power and efficiency for an on-chip SLD.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1550381X,p. 1-3
40 Channels × 57 Gb/s monolithically integrated InP-based coherent photonic transmitter
A dual-polarization QPSK transmitter is demonstrated with a record 40 tunable distributed feedback lasers, 80 nested Mach-Zehnder-modulators, and other elements totaling over 1700 functions monolithically integrated on a single InP-based chip that is capable of delivering 2.25 Tb/s.
- 1 September 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1550381X,p. 1-3
40 Channels × 57 Gb/s monolithically integrated InP-based coherent photonic transmitter
A dual-polarization QPSK transmitter is demonstrated with a record 40 tunable distributed feedback lasers, 80 nested Mach-Zehnder-modulators, and other elements totaling over 1700 functions monolithically integrated on a single InP-based chip that is capable of delivering 2.25 Tb/s.
- Open Access
- 1 April 2000
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 127 (2) , 261-265
Development of a Radiative‐Hydrodynamics Testbed Using the Petawatt Laser Facility
Many of the conditions believed to underlie astrophysical phenomena have been difficult to achieve in a laboratory setting. For example, models of supernova remnant evolution rely on a detailed understanding of the propagation of shock waves with gigabar pressures at temperatures of 1 keV or more, at which radiative effects can be important. Current models of gamma-ray bursts posit a relativistically expanding plasma fireball with copious production of electron-positron pairs, a difficult scenario to verify experimentally. However, a new class of lasers, such as the Petawatt Laser, is capable of producing focused intensities greater than 1020 W cm-2, at which such relativistic effects can be observed and even dominate the laser-target interaction. We report here on the development of a testbed using the Petawatt Laser to study the evolution of strong, radiative shock waves. There is ample evidence in observational data from supernova remnants of the aftermath of the passage of radiative shock or blast waves. In the early phases of supernova remnant evolution, the radially expanding shock wave expands nearly adiabatically since it is traveling at a very high velocity as it begins to sweep up the surrounding interstellar gas. A Sedov-Taylor blast wave solution can be applied to this phase when the mass of interstellar gas swept up by the blast greatly exceeds the mass of the stellar ejecta, or a self-similar driven wave model can be applied if the ejecta play a significant role. As the mass of the swept-up material begins to greatly exceed the mass of the stellar ejecta, the evolution transitions to a radiative phase wherein the remnant can be modeled as an interior region of low-density, high-pressure gas surrounded by a thin, spherical shell of cooled, dense gas with a radiative shock as its outer boundary, the pressure-driven snowplow. Until recently it has not been feasible to devise laboratory experiments wherein shock waves with initial pressures in excess of several hundred megabars and temperatures approaching 1 keV are achieved in order to validate the models of the expanding blast wave launched by a supernova in both of its phases of evolution. This new experiment was designed to follow the propagation of a strong blast wave launched by the interaction of an intense short-pulse laser with a solid target. This blast wave is generated by the irradiation of the front surface of a layered, solid target with ~400 J of 1 μm laser radiation in a 20 ps pulse focused to a ~50 μm diameter spot, which produces an intensity in excess of 1018 W cm-2. These conditions approximate a point explosion, and a blast wave that has an initial pressure of several hundred megabars and that decays as it travels approximately radially outward from the interaction region is predicted to be generated. We have utilized streaked optical pyrometry of the blast front to determine its time of arrival at the rear surface of the target. Applications of a self-similar Taylor-Sedov blast wave solution allows the amount of energy deposited to be estimated. By varying the parameters of the laser pulse that impinges on the target, pressures on the order of 1 Gbar with initial temperatures in excess of 1 keV are achievable. At these temperatures and densities radiative processes are coupled to the hydrodynamic evolution of the system. Short-pulse lasers produce a unique environment for the study of coupled radiation hydrodynamics in a laboratory setting.
- 1 April 2000
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 127 (2) , 261-265
Open AccessDevelopment of a Radiative‐Hydrodynamics Testbed Using the Petawatt Laser Facility
Many of the conditions believed to underlie astrophysical phenomena have been difficult to achieve in a laboratory setting. For example, models of supernova remnant evolution rely on a detailed understanding of the propagation of shock waves with gigabar pressures at temperatures of 1 keV or more, at which radiative effects can be important. Current models of gamma-ray bursts posit a relativistically expanding plasma fireball with copious production of electron-positron pairs, a difficult scenario to verify experimentally. However, a new class of lasers, such as the Petawatt Laser, is capable of producing focused intensities greater than 1020 W cm-2, at which such relativistic effects can be observed and even dominate the laser-target interaction. We report here on the development of a testbed using the Petawatt Laser to study the evolution of strong, radiative shock waves. There is ample evidence in observational data from supernova remnants of the aftermath of the passage of radiative shock or blast waves. In the early phases of supernova remnant evolution, the radially expanding shock wave expands nearly adiabatically since it is traveling at a very high velocity as it begins to sweep up the surrounding interstellar gas. A Sedov-Taylor blast wave solution can be applied to this phase when the mass of interstellar gas swept up by the blast greatly exceeds the mass of the stellar ejecta, or a self-similar driven wave model can be applied if the ejecta play a significant role. As the mass of the swept-up material begins to greatly exceed the mass of the stellar ejecta, the evolution transitions to a radiative phase wherein the remnant can be modeled as an interior region of low-density, high-pressure gas surrounded by a thin, spherical shell of cooled, dense gas with a radiative shock as its outer boundary, the pressure-driven snowplow. Until recently it has not been feasible to devise laboratory experiments wherein shock waves with initial pressures in excess of several hundred megabars and temperatures approaching 1 keV are achieved in order to validate the models of the expanding blast wave launched by a supernova in both of its phases of evolution. This new experiment was designed to follow the propagation of a strong blast wave launched by the interaction of an intense short-pulse laser with a solid target. This blast wave is generated by the irradiation of the front surface of a layered, solid target with ~400 J of 1 μm laser radiation in a 20 ps pulse focused to a ~50 μm diameter spot, which produces an intensity in excess of 1018 W cm-2. These conditions approximate a point explosion, and a blast wave that has an initial pressure of several hundred megabars and that decays as it travels approximately radially outward from the interaction region is predicted to be generated. We have utilized streaked optical pyrometry of the blast front to determine its time of arrival at the rear surface of the target. Applications of a self-similar Taylor-Sedov blast wave solution allows the amount of energy deposited to be estimated. By varying the parameters of the laser pulse that impinges on the target, pressures on the order of 1 Gbar with initial temperatures in excess of 1 keV are achievable. At these temperatures and densities radiative processes are coupled to the hydrodynamic evolution of the system. Short-pulse lasers produce a unique environment for the study of coupled radiation hydrodynamics in a laboratory setting.
- 1 June 1991
- Published by SPIE-Intl Soc Optical Eng
- Vol. 1413, 41-53
Prepulse suppression using a self-induced ultrashort pulse plasma mirror
The plasma mirror is a self-induced, plasma-based optical element which can be inserted into existing experiments to reduce prepulse energy without significant degradation of ultrashort pulse laser light. We have directly observed the nonlinear reflectivity of the plasma mirror as well as the spatial and temporal characteristics of the reflected pulse. The initial measurements indicate that the incident pulse reflects specularly from a high density, highly reflective plasma. The reflected pulse has a smoothed spatial profile and reduced pulsewidth. We outline future work to characterize both the plasma mirror technique of prepulse suppression and its reflected pulse.
- 1 June 1991
- Published by SPIE-Intl Soc Optical Eng
- Vol. 1413, 41-53
Prepulse suppression using a self-induced ultrashort pulse plasma mirror
The plasma mirror is a self-induced, plasma-based optical element which can be inserted into existing experiments to reduce prepulse energy without significant degradation of ultrashort pulse laser light. We have directly observed the nonlinear reflectivity of the plasma mirror as well as the spatial and temporal characteristics of the reflected pulse. The initial measurements indicate that the incident pulse reflects specularly from a high density, highly reflective plasma. The reflected pulse has a smoothed spatial profile and reduced pulsewidth. We outline future work to characterize both the plasma mirror technique of prepulse suppression and its reflected pulse.