Richard Jones
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Richard Jones has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- David Gold
Intel Corporation, Santa Clara, CA, USA
5 shared publications Chenyang Wu
Intel Corporation, Santa Clara, CA, USA
3 shared publications- Haisheng Rong
Intel Corporation, Santa Clara, CA, USA
3 shared publications Jordan Davis
Intel Corporation, Santa Clara, CA, USA
3 shared publicationsKalyan Sikder
Intel Corporation, Santa Clara, CA, USA
3 shared publications- Karan Mehta
Intel Corporation, Santa Clara, CA, USA
3 shared publications
Latest Publications
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 37 (20) , 1177-1180
Heterogeneously Integrated III-V/Silicon C-Band Tunable Lasers on 300-mm Silicon Photonic Wafers
We demonstrate a heterogeneously integrated III-V/Si tunable laser fabricated on a 300-mm silicon photonics platform, achieving a wide tuning range from 1510 to 1570 nm with a side-mode suppression ratio (SMSR) above 50 dB, a Lorentzian linewidth below 30 kHz, and relative intensity noise less than −150 dBc/Hz. This laser delivers on-chip optical power exceeding 20 mW at 100 mA of bias current with low variability across a wafer. With closed-loop control, the laser frequency stability is maintained within ±1 GHz. This tunable laser can be readily integrated with other photonic components, such as wavelength lockers, modulators, and detectors, enabling fully integrated photonic chips for optical communications, sensing, and next-generation computing applications.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 37 (20) , 1177-1180
Heterogeneously Integrated III-V/Silicon C-Band Tunable Lasers on 300-mm Silicon Photonic Wafers
We demonstrate a heterogeneously integrated III-V/Si tunable laser fabricated on a 300-mm silicon photonics platform, achieving a wide tuning range from 1510 to 1570 nm with a side-mode suppression ratio (SMSR) above 50 dB, a Lorentzian linewidth below 30 kHz, and relative intensity noise less than −150 dBc/Hz. This laser delivers on-chip optical power exceeding 20 mW at 100 mA of bias current with low variability across a wafer. With closed-loop control, the laser frequency stability is maintained within ±1 GHz. This tunable laser can be readily integrated with other photonic components, such as wavelength lockers, modulators, and detectors, enabling fully integrated photonic chips for optical communications, sensing, and next-generation computing applications.
- 1 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3314-3319
Fully Integrated Tunable III-V/Si Laser With On-Chip SOA
Silicon-photonics based high volume manufacturable lasers are playing an increasingly important role in optical communication and sensing due to their low-cost, high performance, and seamless integration with other silicon photonics components. Here we demonstrate a silicon-photonics based widely tunable laser with integrated semiconductor optical amplifier (SOA) and wavelength reference on a high-volume, 300-mm III-V/Si integration platform. The laser shows a tuning range >50 nm with side-mode suppression ratio >55 dB, Lorentzian linewidth <30 kHz, and relative intensity noise (RIN) <−150 dB/Hz across the entire tuning range. We also demonstrate an active control of the laser. When locked to an external wavelength reference, the laser shows a frequency error <1 GHz against changes to the chip temperature. Amplified by an SOA, the on-chip optical power exceeds 17 dBm. Such tunable lasers can be integrated with other silicon-based photonic components including high-speed modulators and detectors for a variety of applications, ranging from optical communication to sensing.
- 1 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3314-3319
Fully Integrated Tunable III-V/Si Laser With On-Chip SOA
Silicon-photonics based high volume manufacturable lasers are playing an increasingly important role in optical communication and sensing due to their low-cost, high performance, and seamless integration with other silicon photonics components. Here we demonstrate a silicon-photonics based widely tunable laser with integrated semiconductor optical amplifier (SOA) and wavelength reference on a high-volume, 300-mm III-V/Si integration platform. The laser shows a tuning range >50 nm with side-mode suppression ratio >55 dB, Lorentzian linewidth <30 kHz, and relative intensity noise (RIN) <−150 dB/Hz across the entire tuning range. We also demonstrate an active control of the laser. When locked to an external wavelength reference, the laser shows a frequency error <1 GHz against changes to the chip temperature. Amplified by an SOA, the on-chip optical power exceeds 17 dBm. Such tunable lasers can be integrated with other silicon-based photonic components including high-speed modulators and detectors for a variety of applications, ranging from optical communication to sensing.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3300-3305
Measurement of the Nonlinear Loss and Effective Free Carrier Lifetime in Silicon Microring Resonators
A methodology is presented to characterize the nonlinear absorption loss coefficient and the effective free carrier lifetime in silicon ring resonators at high intra-ring optical power density. The proposed methodology uses a continuous-wave pump-probe measurement to capture distortion-free transmission spectra in the regime of nonlinear absorption. The measured nonlinear loss coefficient using this method is 30–40% higher than that obtained with a single high-power continuous-wave laser. The pump-probe measurement also reveals that the optical loss sharply increases beyond ∼11.6 mW in the bus waveguide for the ring design with the highest quality-factor, most likely due to the saturation of trap states by electrons and holes generated by two-photon absorption.
- 15 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (9) , 3300-3305
Measurement of the Nonlinear Loss and Effective Free Carrier Lifetime in Silicon Microring Resonators
A methodology is presented to characterize the nonlinear absorption loss coefficient and the effective free carrier lifetime in silicon ring resonators at high intra-ring optical power density. The proposed methodology uses a continuous-wave pump-probe measurement to capture distortion-free transmission spectra in the regime of nonlinear absorption. The measured nonlinear loss coefficient using this method is 30–40% higher than that obtained with a single high-power continuous-wave laser. The pump-probe measurement also reveals that the optical loss sharply increases beyond ∼11.6 mW in the bus waveguide for the ring design with the highest quality-factor, most likely due to the saturation of trap states by electrons and holes generated by two-photon absorption.
- 15 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (7) , 365-368
High-Power Heterogeneously Integrated III-V/Silicon Superluminescent Diode
We demonstrate heterogeneously integrated O-band superluminescent diodes (SLDs) emitting 10 mW of continuous-wave output power at a device temperature of up to 65 °C. At 10 mW output power, the SLD has a wall-plug efficiency of 3.1% at 25 °C and 1.3% at 65 °C; a 3-dB optical bandwidth of 20–30 nm; and spectral modulation (ripple amplitude) of 0.13 (1.1 dB) at 25 °C and 0.09 (0.8 dB) at 65 °C. This is the highest reported output power and efficiency for a SLD integrated with silicon by more than one order of magnitude, which opens up new applications for cheaper and more compact SLD-based photonics integrated circuits.
- 15 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (7) , 365-368
High-Power Heterogeneously Integrated III-V/Silicon Superluminescent Diode
We demonstrate heterogeneously integrated O-band superluminescent diodes (SLDs) emitting 10 mW of continuous-wave output power at a device temperature of up to 65 °C. At 10 mW output power, the SLD has a wall-plug efficiency of 3.1% at 25 °C and 1.3% at 65 °C; a 3-dB optical bandwidth of 20–30 nm; and spectral modulation (ripple amplitude) of 0.13 (1.1 dB) at 25 °C and 0.09 (0.8 dB) at 65 °C. This is the highest reported output power and efficiency for a SLD integrated with silicon by more than one order of magnitude, which opens up new applications for cheaper and more compact SLD-based photonics integrated circuits.
- 1 January 2023
- Published by Optica Publishing Group
- p. ATh5A.6
Heterogeneously Integrated Hybrid III-V/Silicon Superluminescent Diode with >10 mW Output Power
We demonstrate an O-band on-chip superluminescent diode emitting 10 mW broadband output power at 65 °C with a ripple amplitude of 0.8 dB. This is the highest reported power and efficiency for an on-chip SLD.
- 1 January 2023
- Published by Optica Publishing Group
- p. ATh5A.6
Heterogeneously Integrated Hybrid III-V/Silicon Superluminescent Diode with >10 mW Output Power
We demonstrate an O-band on-chip superluminescent diode emitting 10 mW broadband output power at 65 °C with a ripple amplitude of 0.8 dB. This is the highest reported power and efficiency for an on-chip SLD.
- 1 January 2023
- Published by Optica Publishing Group
- p. Tu2E.4
Advancements in heterogeneously integrated silicon photonics for IMDD and coherent data transmission
Explosive growth of datacenter traffic drives rapid scaling of optical interconnects architectures and technologies. We summarize the advancements in Intel’s heterogeneously integrated silicon photonics manufacturing platform enabling throughput scaling for IMDD and high-efficiency coherent links.
- 1 January 2023
- Published by Optica Publishing Group
- p. Tu2E.4
Advancements in heterogeneously integrated silicon photonics for IMDD and coherent data transmission
Explosive growth of datacenter traffic drives rapid scaling of optical interconnects architectures and technologies. We summarize the advancements in Intel’s heterogeneously integrated silicon photonics manufacturing platform enabling throughput scaling for IMDD and high-efficiency coherent links.
- 1 January 2021
- Published by Optica Publishing Group
- p. M5A.1
Overview and Future Challenges on III-V Integration Technologies in Silicon Photonics Platform
An overview of the work done at Intel Corporation on III-V integration with silicon photonics will be given, and future areas of development discussed.
- 1 January 2021
- Published by Optica Publishing Group
- p. M5A.1
Overview and Future Challenges on III-V Integration Technologies in Silicon Photonics Platform
An overview of the work done at Intel Corporation on III-V integration with silicon photonics will be given, and future areas of development discussed.
- Open Access
- 1 October 2010
- Published by The Electrochemical Society in ECS Transactions
- Vol. 33 (4) , 411-420
Die-to-Die Adhesive Bonding for Evanescently-Coupled Photonic Devices
Heterogeneous integration of III-V semiconductor materials on the SOI (silicon-on-insulator) platform is a promising method for fabrication of active photonic devices. It requires a reliable and robust bonding procedure that also enables an effective optical coupling between III-V layers and SOI waveguides. Molecular bonding is usually used for this purpose, but due to its strict requirements for contamination-free and smooth bonding surfaces, it might not be sufficiently robust for industrial-scale fabrication. As an alternative technique, in this paper we present an adhesive bonding procedure based on the use of DVS-BCB. We developed a die-to-die adhesive bonding procedure, resulting in less than 100nm-thick bonding layers thereby enabling evanescent optical coupling between III-V layers and silicon waveguides. The process shows very good robustness and bonding strength (brake-down shear stress of 2MPa). In perspective, we plan to scale-up the process to a multiple die-to-wafer bonding procedure which would be suitable for industrial-scale fabrication.
- 1 October 2010
- Published by The Electrochemical Society in ECS Transactions
- Vol. 33 (4) , 411-420
Open AccessDie-to-Die Adhesive Bonding for Evanescently-Coupled Photonic Devices
Heterogeneous integration of III-V semiconductor materials on the SOI (silicon-on-insulator) platform is a promising method for fabrication of active photonic devices. It requires a reliable and robust bonding procedure that also enables an effective optical coupling between III-V layers and SOI waveguides. Molecular bonding is usually used for this purpose, but due to its strict requirements for contamination-free and smooth bonding surfaces, it might not be sufficiently robust for industrial-scale fabrication. As an alternative technique, in this paper we present an adhesive bonding procedure based on the use of DVS-BCB. We developed a die-to-die adhesive bonding procedure, resulting in less than 100nm-thick bonding layers thereby enabling evanescent optical coupling between III-V layers and silicon waveguides. The process shows very good robustness and bonding strength (brake-down shear stress of 2MPa). In perspective, we plan to scale-up the process to a multiple die-to-wafer bonding procedure which would be suitable for industrial-scale fabrication.
- 29 February 2008
- Published by Optica Publishing Group in Optics Letters
- Vol. 33 (5) , 530-532
Silicon-on-insulator eight-channel optical multiplexer based on a cascade of asymmetric Mach-Zehnder interferometers
A monolithically integrated eight-channel optical multiplexer (Mux) with a channel spacing is presented based on a silicon-on-insulator rib waveguide and an asymmetric Mach–Zehnder interferometer. All channels were optimized independently with integrated heaters. The fully tuned Mux shows an adjacent channel isolation of , an excess loss of , and a channel uniformity of over a wavelength span. In addition, the phase tuning efficiency for different interlevel dielectric layer thicknesses and thermal crosstalk were investigated.- 29 February 2008
- Published by Optica Publishing Group in Optics Letters
- Vol. 33 (5) , 530-532
Silicon-on-insulator eight-channel optical multiplexer based on a cascade of asymmetric Mach-Zehnder interferometers
A monolithically integrated eight-channel optical multiplexer (Mux) with a channel spacing is presented based on a silicon-on-insulator rib waveguide and an asymmetric Mach–Zehnder interferometer. All channels were optimized independently with integrated heaters. The fully tuned Mux shows an adjacent channel isolation of , an excess loss of , and a channel uniformity of over a wavelength span. In addition, the phase tuning efficiency for different interlevel dielectric layer thicknesses and thermal crosstalk were investigated.