ECErhan Cetin

Erhan Cetin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Erhan Cetin has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Experimental Investigation and Multi‐Response Optimization of Crashworthiness Performance in 3D ‐Printed Thin‐Walled Tubes

    by Emre Isa Albak, Ibrahim Berk Kucukgunduz, Murat Isik, Erhan Cetin

    This study investigates how geometric configurations and manufacturing parameters affect the crashworthiness performance of tubes printed by fused deposition modeling (FDM) using polymer filaments. Three distinct cross‐sectional geometries are evaluated using the standard polylactic acid (PLA), PLA PRO1, and carbon‐fiber‐reinforced polylactic acid (PLA‐CF) filaments. To optimize experimental efficiency, a Taguchi L9 orthogonal array is employed to analyze the interactions between material type, sectional geometry, wall thickness, and infill density. Mechanical characterization uses quasi‐static axial compression tests to evaluate deformation behavior and structural stability. The results demonstrate that sectional geometry is the overwhelmingly dominant factor, accounting for 68% to 88% of the total variance across the initial peak crushing force (IPCF), mean crushing force (MCF), specific energy absorption (SEA), and crushing force efficiency (CFE) ( p < 0.05). Specifically, hexagonal and circular topologies exhibited stable, progressive folding mechanisms, significantly outperforming square designs, which were prone to unstable buckling. Material selection emerged as the second most influential factor, contributing up to 27% of the variance in weight‐specific energy absorption and 17% in peak crushing force, with PLA‐CF providing superior weight‐specific energy dissipation. The optimization analysis identifies the hexagonal cross‐section printed with PLA‐CF as the ideal configuration for high‐performance energy absorbers. This research offers a systematic foundation for identifying optimal configurations to maximize energy absorption while ensuring structural integrity in thin‐walled polymeric structures. A confirmation experiment on the predicted optimum verifies the dominant role of the hexagonal geometry and PLA‐CF material and quantifies the uncertainty of the additive model at untested factor combinations.

  • Experimental investigation and COPRAS-based selection of FFF-printed double-walled polygonal conical structures for crashworthiness applications

    by Hudai Yasar, Oguzhan Akar, Erhan Cetin, Emre Isa Albak

    This study presents a comprehensive experimental investigation into the crashworthiness performance of thin-walled, double-walled polygonal conical structures fabricated via Fused Filament Fabrication (FFF) using enhanced polylactic acid (PLA+) material. The influence of the cross-sectional geometry (square, hexagonal, and octagonal) and of the taper strategies applied to the internal and external walls is systematically evaluated through 30 quasi-static axial compression tests on 15 configurations. Specific Energy Absorption (SEA), Crushing Force Efficiency (CFE), Mean Crushing Force (MCF), and Initial Peak Crushing Force (IPCF) are examined as crashworthiness indicators, and the most efficient design is determined through the Complex Proportional Assessment (COPRAS) method. The experimental results showed that increasing the vertex number from square to octagonal cross-sections increased SEA by up to 122%, while the outer-cell conicity reduced the IPCF of the octagonal tubes by 10.9% and increased their CFE by 13.1% compared with the non-tapered octagonal design. According to the COPRAS analysis, the octagonal tube with outer-cell conicity (T8_OCAG) was identified as the optimal configuration with a performance index of 100%, an average SEA of 18.57 J/g, and a CFE of 0.62–0.63. The selection was verified through four additional multi-criteria decision-making methods (TOPSIS, VIKOR, EDAS, and MOORA) and through weight sensitivity analyses, which confirmed the robustness of the identified optimum. The results demonstrate that the synergy between the polygonal cross-section, the strategically applied wall conicity, and additive manufacturing offers significant potential for developing lightweight, high-performance passive safety components.


  • Open Access

    Energy Absorption of a Novel Lattice Structure‐Filled Multicell Thin‐Walled Tubes Under Axial and Oblique Loadings

    by Gazi Basar Kocabas, Senai Yalcinkaya, Erhan Cetin, Yusuf Sahin

    Multicell design and lattice structure as filling material are two effective methods for enhancing the energy absorption performance of thin‐walled tubes. This study combines these two approaches to present a multicell tube with a novel lattice structure and investigates the energy absorption performances of these hybrid multicell tubes under axial (0°) and oblique (10°, 20°, and 30°) impact loading conditions. As filling structure, β‐Ti 3 Au lattice geometry with varying lattice strut diameters and the number of lattice unit cells are used, while the single and multicell thin‐walled tubes with different tube thicknesses are employed as main absorbing element. In this context, the effects of numbers of lattice unit cells, lattice strut diameter, cell numbers of the tube, and tube thickness on energy absorption performance of hybrid tubes are examined using validated nonlinear finite element models. This investigation unveils that the synergistic interplay between the multicell tubes and lattice structure during deformation significantly elevates the energy absorption performance of the hybrid structure. Notably, the findings demonstrate that multicell hybrid tubes exhibit a remarkable capacity to absorb up to 30.36% more impact energy compared to the aggregate absorption of individual components in hybrid tubes.


  • Open Access

    Compression behavior and design optimization of triggered glass fiber reinforced polymer square tubes

    by Cengiz Baykasoğlu, Adil Baykasoğlu, Muhammed Emin Erdin, Erhan Cetin

    Glass fiber reinforced polymer (GFRP) composite tubes have become increasingly popular in crashworthiness applications. On the other hand, square section GFRP tubes are prone to damage in a catastrophic failure mode in the early stages of the crushing process. At this point, triggering mechanisms have great potential to ensure deformation in progressive mode and improve the compression performance of GFRP tubes. Motivated by these facts, this paper aims to optimize the compression performance of square GFRP tubes by implementing notch‐type triggering mechanisms. The effects of notch width, number and length on the axial compression response of tubes were investigated to determine the optimal trigger configurations that would maximize specific energy absorption (SEA) and minimize peak crushing force (PCF). Experiments were conducted based on Taguchi L9 orthogonal array design, and Taguchi coupled Weighted Aggregated Sum Product Assessment (WASPAS) method was employed for optimizing multiple responses. The optimization results revealed that the proposed trigger mechanisms induced progressive crushing by preventing catastrophic failure, thereby significantly improving the compression performance of GFRP tubes. In particular, the results showed that the PCF of intact GFRP tube decreased by up to 38%, while SEA increased by up to 130% with the help of proposed trigger mechanism. Highlights: The compression performance of square GFRP tubes improved by notch‐type triggering. The notch width, length and number were chosen as design parameters. Taguchi experimental design was used to find the best configuration of design parameters. The optimum configurations were examined through the entropy‐WASPAS approach. The results revealed that significant improvements can be achieved using trigger mechanism.


  • Open Access

    A bibliometric overview of research on auxetic structures: Trends and patterns

    by Erhan Ceti̇n, Sertac Samed Seyi̇toglu

    Auxetic structures have very interesting features compared to traditional structures and can also be used in the automotive industry thanks to their lightness and strength have attracted the attention of researchers in recent decades. The current study summarizes the contributions made by researchers from all over the world between 2002 and 2022 in the field of auxetic structures. Using the Scopus database, a bibliometric analysis was used to examine the scientific studies in the area. The analysis covered different characteristics of publications, including publication type, main study fields, journals, citations, authorship patterns, affiliations, and keywords. The bibliometric indicators showed that there were 2599 publications published by 5161 authors in 85 countries from 2002 to 2022. The results also showed that the publications produced came primarily from China, the United States, and the United Kingdom, and the publications produced from these countries accounted for 42.99% of all publications. In particular, the most productive author, country, institution, and journal are Grima JN, China, Ministry of Education China, and Composite Structures, respectively. This study has great value since it demonstrates how to research topics change from year to year and can predict future development trends.


  • Open Access

    Effect of triggering on the axial crushing behavior of GFRP tubes: Experimental investigation and optimization

    by Cengiz Baykasoğlu, Adil Baykasoğlu, Muhammed Emin Erdin, Erhan Cetin

    Composite thin‐walled tubes made of glass fiber reinforced plastics (GFRP) are attracting great attention due to their lightweight and outstanding crashworthiness capacity. Implementing triggers to the design of GFRP composite tubes enables a further increase in specific energy absorption while simultaneously reducing peak crushing force. Motivated by these facts, a notch‐type triggering mechanism is suggested in this work to enhance the energy absorption capabilities of circular GFRP composite tubes. GFRP tube samples with (0°/90°)8 layups are manufactured using the roll wrapping process. Subsequently, these samples are triggered and subjected to quasi‐static axial compression tests. The diameter, quantity and placement of the triggering notches are selected as design parameters, and experiments are carried out using Taguchi's L9 orthogonal array. Each of these parameters has three levels to identify the optimal combination of design parameters. To optimize multiple responses, the weighted aggregated sum product assessment, a multiple criteria decision‐making technique, is employed in conjunction with mono‐criteria optimization. The findings indicated that substantial enhancements can be realized in all parameters related to energy absorption performance by triggering progressive crushing modes in a controlled manner using a notch‐type triggering mechanism. In particular, the findings indicated that the specific energy absorption and the crush force efficiency of the intact GFRP composite tubes could be improved up to 18% and 68.3%, respectively, by the selection of appropriate triggering parameters.Highlights: Axial crushing and optimal design of triggered GFRP tubes are investigated Number, diameter, and center distance of the notches are chosen as parameters Taguchi experimental design is used for the best configuration of parameters The optimum configurations are investigated using the entropy‐WASPAS Significant improvements are achieved using the trigger mechanism


  • Open Access

    Experimental Comparison of the Energy Absorption Performance of Traditional Lattice and Novel Lattice Filled Tubes

    by Gazi Başar KOCABAŞ, Erhan Ceti̇n, Senai Yalci̇nkaya, Yusuf Şahi̇n

    In this study, β-Ti3Au lattice structure was proposed for the first time in the literature as a filling material to increase the energy absorption performance of thin-walled tubes. In this context, the energy absorption performances of conventional lattice structure (i.e., BCC and FCC) filled thin-walled tubes and proposed novel β-Ti3Au lattice structure filled thin-walled tubes with proposed were compared experimentally. BCC hybrid, FCC hybrid and β-Ti3Au hybrid structures produced by additive manufacturing technology using PA2200 powder were crushed and evaluated by considering various crashworthiness criteria such as EA and SEA. The results showed that the β-Ti3Au hybrid structures are better crashworthiness performance than that of traditional filling BCC and FCC lattice structure filled thin-walled tubes. In particular, the β-Ti3Au hybrid structure has 18.17% and 19.39% higher EA values than BCC hybrid and FCC hybrid, respectively. These values are 16.50% and 15.66% for SEA values, respectively. As a result, the current investigation showed that the suggested β-Ti3Au lattice structures as a filler material can be a significant alternative for applications where energy absorption performance is critical.