Dongsheng Zhang
Dongsheng Zhang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jiliang Pan
School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 shared publications - Meifeng Cai
School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 shared publications - Xun Xi
School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing, China
2 shared publications - Ying Zhang
School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 shared publications - Kun Bi
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
1 shared publication - Peitao Wang
Beijing Key Laboratory of Urban Underground Space Engineering, USTB, Beijing, China
1 shared publication
Latest Publications
- Open Access
Study on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures
The rise in the connectivity of the fractures is a key task in oil/gas and geothermal exploitation systems. Natural fractures widely exist in underground reservoir sandstone, while the mechanical behavior of rock with fractures subjected to hydro-mechanical coupling loads is far from clear. This paper employed comprehensive experiments and numerical simulations to investigate the failure mechanism and permeability law for sandstone specimens with T-shaped faces subjected to hydro-mechanical coupling loads. The effects of crack closure stress, crack initiation stress, strength, and axial strain stiffness of the specimens under different fracture inclination angles are discussed, and the evolution processes of permeability are obtained. The results show that secondary fractures are created around the pre-existing T-shaped fractures through tensile, shear, or mixed modes. The fracture network causes an increase in the permeability of the specimen. T-shaped fractures have a more significant effect on the strength of the specimens than water. The peak strengths of T-shaped specimens decreased by 34.89%, 33.79%, 46.09%, 39.32%, 47.23%, 42.76%, and 36.02%, respectively, compared with intact specimen without water pressure. With the increase in deviatoric stress, the permeability of T-shaped sandstone specimens decreases first, then increases, reaching its maximum value when macroscopic fractures are formed, after which the stress suddenly decreases. When the prefabricated T-shaped fracture angle is 75°, the corresponding permeability of the sample at failure is maximum, with a value of 15.84 × 10−16 m2. The failure process of the rock is reproduced through numerical simulations, in which the influence of damage and macroscopic fractures on permeability is discussed.
Open AccessStudy on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures
The rise in the connectivity of the fractures is a key task in oil/gas and geothermal exploitation systems. Natural fractures widely exist in underground reservoir sandstone, while the mechanical behavior of rock with fractures subjected to hydro-mechanical coupling loads is far from clear. This paper employed comprehensive experiments and numerical simulations to investigate the failure mechanism and permeability law for sandstone specimens with T-shaped faces subjected to hydro-mechanical coupling loads. The effects of crack closure stress, crack initiation stress, strength, and axial strain stiffness of the specimens under different fracture inclination angles are discussed, and the evolution processes of permeability are obtained. The results show that secondary fractures are created around the pre-existing T-shaped fractures through tensile, shear, or mixed modes. The fracture network causes an increase in the permeability of the specimen. T-shaped fractures have a more significant effect on the strength of the specimens than water. The peak strengths of T-shaped specimens decreased by 34.89%, 33.79%, 46.09%, 39.32%, 47.23%, 42.76%, and 36.02%, respectively, compared with intact specimen without water pressure. With the increase in deviatoric stress, the permeability of T-shaped sandstone specimens decreases first, then increases, reaching its maximum value when macroscopic fractures are formed, after which the stress suddenly decreases. When the prefabricated T-shaped fracture angle is 75°, the corresponding permeability of the sample at failure is maximum, with a value of 15.84 × 10−16 m2. The failure process of the rock is reproduced through numerical simulations, in which the influence of damage and macroscopic fractures on permeability is discussed.
- Open Access
A Negative Value of the Non-Darcy Flow Coefficient in Pore-Fracture Media under Hydro-Mechanical Coupling
The Forchheimer equation is widely used in studying non-Darcy flow. Non-Darcy flow coefficient β in the Forchheimer equation is generally thought to be positive, and there are few studies on negative values. In this work, we performed seepage tests on sandstone samples with single, T-shaped, and Y-shaped fractures under different confining pressures, water pressures, and angles to analyze the nonlinear seepage behaviors and the features of Forchheimer’s coefficients of water flow in pore-fracture media. At the same time, the flow trajectory of the fluid inside the sample is studied by numerical simulation. The results showed that β was negative in the seepage test in pore-fracture media. The angle of the single-fracture sandstone sample had a greater influence on the seepage characteristic of the pore-fracture media; angles of the sandstone samples with T-shaped and Y-shaped fractures had a relatively small impact. The relationship between β and inherent permeability k was following a power function, and the differences in the seepage characteristics between the three fractures were compared. The use of the normalized hydraulic conductivity method is used to evaluate the applicability of Darcy’s law. Finally, we explained the primary cause of non-linear seepage behaviors with negative β in fractured sandstone samples.
Open AccessA Negative Value of the Non-Darcy Flow Coefficient in Pore-Fracture Media under Hydro-Mechanical Coupling
The Forchheimer equation is widely used in studying non-Darcy flow. Non-Darcy flow coefficient β in the Forchheimer equation is generally thought to be positive, and there are few studies on negative values. In this work, we performed seepage tests on sandstone samples with single, T-shaped, and Y-shaped fractures under different confining pressures, water pressures, and angles to analyze the nonlinear seepage behaviors and the features of Forchheimer’s coefficients of water flow in pore-fracture media. At the same time, the flow trajectory of the fluid inside the sample is studied by numerical simulation. The results showed that β was negative in the seepage test in pore-fracture media. The angle of the single-fracture sandstone sample had a greater influence on the seepage characteristic of the pore-fracture media; angles of the sandstone samples with T-shaped and Y-shaped fractures had a relatively small impact. The relationship between β and inherent permeability k was following a power function, and the differences in the seepage characteristics between the three fractures were compared. The use of the normalized hydraulic conductivity method is used to evaluate the applicability of Darcy’s law. Finally, we explained the primary cause of non-linear seepage behaviors with negative β in fractured sandstone samples.