MGMahmoud Ghafari

Mahmoud Ghafari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mahmoud Ghafari has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electrospun PVDF/SiO 2 Separators for High‐Performance Lithium‐Ion Batteries

    by Sahand Jafarzadeh, Mahmoud Ghafari, Alireza Habibi, Hossein Jafaripour, Zeinab Sanaee

    The performance and safety of lithium‐ion batteries (LIBs) are strongly influenced by the properties of the separator, which must simultaneously ensure efficient ion transport, high electrolyte affinity, electrochemical stability, and adequate mechanical integrity. However, achieving a balanced combination of these properties remains challenging, particularly for polymer‐based separators. In this work, electrospun PVDF/SiO 2 nanofibrous membranes were fabricated and systematically evaluated as LIB separators, with specific attention to the effect of SiO 2 content on the structural and electrochemical characteristics. Among the prepared samples, the PVDF separator containing 10 wt% SiO 2 exhibited the most favorable balance of properties. This membrane features a uniform nanofibrous morphology with an average fiber diameter of ~310 nm, a high porosity of 66%, and an exceptional electrolyte uptake (EU) of 375%, which collectively promote efficient electrolyte retention and ion transport. Consequently, a high ionic conductivity of 1.99 mS cm −1 was achieved while maintaining acceptable mechanical properties, including a tensile strength of 1.36 MPa and an elongation at break of 39%. Linear sweep voltammetry (LSV) measurements revealed an extended electrochemical stability window up to ~5.0 V, indicating enhanced oxidation resistance. When employed in Li/LiFePO 4 half‐cells, the optimized separator delivered stable long‐term cycling performance, retaining a discharge capacity of about 100 mAh g −1 after 250 cycles with ~80% capacity retention and a Coulombic efficiency close to 100%. In addition, the cell assembled with the PVDF + 10 wt% SiO 2 separator exhibited better rate capability, delivering a discharge capacity of about 77 mAh g −1 at 2 C and maintaining about 103 mAh g −1 after 100 cycles at 1C. The results demonstrate that rational incorporation of SiO 2 nanoparticles into electrospun PVDF separators can effectively balance porosity, electrolyte wettability, ionic conductivity, and electrochemical stability, offering a simple and practical strategy for developing high‐performance separators for advanced LIBs.

  • Novel insights into aqueous Zn–MnO2 batteries: a simple and robust approach to refute the Zn2+ intercalation mechanism

    by Amirali Valinejad, Mahmoud Ghafari, Zeinab Sanaee, Mohammadreza Kolahdouz

    Proving minor contribution of Zn2+ intercalation in RAZMBs' reaction mechanisms regardless of electrolyte acidity by a segregated electrolyte system.


  • Realization of high-performance room temperature solid state Li-metal batteries using a LiF/PVDF-HFP composite membrane for protecting an LATP ceramic electrolyte

    by Mahmoud Ghafari, Zeinab Sanaee, Alireza Babaei, Shams Mohajerzadeh

    The NASICON-type lithium aluminum titanium phosphate (LATP) solid-state electrolyte is considered as a promising candidate for next-generation lithium metal batteries with high energy density. However, the instability of LATP in the presence of Li metal and its poor contact with the electrodes hinder its practical application. Here, a novel protective-layer (PL) consisting of a PVDF-HFP polymer matrix and LiF ceramic particles was developed. The proposed layer provides a suitable interface between LATP and the electrodes, prevents the reduction of LATP by Li metal, and suppresses the growth of Li dendrites. The excellent performance of the PL|LATP|PL structure as a ceramic-polymer composite electrolyte (CPCE) was demonstrated by Li|CPCE|Li symmetric cell plating/stripping for 1000 hours at 0.5 mA cm−2 without a short circuit. In addition, the assembled LiFePO4|CPCE|Li full-cell was tested at two different C-rates of 0.2C and 1C. The cell cycled at 0.2C was durable and stable for about eight months and retained 86.4% of the initial capacity of 135.6 mA h g−1, while the other cell cycled at 1C had desirable cycling performance for 2000 cycles with little capacity degradation of about 12.5%. In this study, an efficient and robust composite electrolyte was proposed for the development of solid-state Li-metal batteries with high stability, long lifetime, and high power density.