KBKonstantinos E. Bantralexis

Konstantinos E. Bantralexis

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Konstantinos E. Bantralexis has a total of 7 co-authors. Here are the top co-authors by number of shared publications:

  • Ioannis N. Markou

    Soil Mechanics and Foundation Engineering Laboratory, Department of Civil Engineering, Democritus University of Thrace, University Campus Kimmeria, GR-67150 Xanthi, Greece

    3 shared publications
  • Evangelos D. Evangelou

    Soil Mechanics and Foundation Engineering Laboratory, Department of Civil Engineering, Democritus University of Thrace, University Campus Kimmeria, GR-67150 Xanthi, Greece

    2 shared publications
  • A. G. Vassou

    Democritus University of Thrace, Department of Civil Engineering, University Campus - Kimmeria, GR-67100 Xanthi, Greece

    1 shared publication
  • Eleni S. Boura

    Soil Mechanics and Foundation Engineering Laboratory, Department of Civil Engineering, Democritus University of Thrace, University Campus Kimmeria, GR-67150 Xanthi, Greece

    1 shared publication
  • Georgios I. Zografos

    1 shared publication
  • I. N. Markou

    Democritus University of Thrace, Department of Civil Engineering, University Campus - Kimmeria, GR-67100 Xanthi, Greece

    1 shared publication

Latest Publications

  • Open Access

    Dynamic Parameters of Fiber-Reinforced Soils at Very Small Strains

    by Konstantinos E. Bantralexis, Eleni S. Boura, Ioannis N. Markou, Evangelos D. Evangelou

    Improvement of the engineering properties of soils by reinforcing them with fibers, at an appropriate percentage of the weight of dry soil, is frequently selected to ensure the safe construction and operation of many structures. However, the published information regarding the investigation of the dynamic properties of fiber-reinforced soils at very small strains is very limited. Toward this end, the dynamic behavior of fiber-reinforced soils is investigated experimentally by conducting Bender Element tests under different confining pressures. The effect of polypropylene fiber reinforcement on the shear wave velocity (Vs), the velocity of the primary wave (Vp), the initial Young’s modulus (E0) and the initial shear modulus (G0) of sand and sand–clay mixtures with varying compositions is examined in this study. The soils were reinforced with five different types of polypropylene fibers having lengths from 9 mm to 50 mm, at fiber contents from 0.5% to 2% by weight of dry soil. The results indicate that the dynamic and the small-strain stiffness parameters of fiber-reinforced soils increase with increasing confining pressure, while also being affected by the soil type, the fiber type, and content. Although fiber inclusion resulted generally in a reduction of the dynamic properties of soils, increases ranging from 5% to 55% were observed in certain soil–fiber combinations in comparison with the unreinforced soils.

  • Open Access

    Strength prediction models for fiber-reinforced soils under effective stress triaxial compression testing

    by K. E. Bantralexis, A. G. Vassou, I. N. Markou

    The improvement of shear strength of soils is a common practice applied in numerous civil engineering projects. Geosynthetics like geogrids, geotextiles and fibers contribute significantly in soil strength improvement. Soil reinforcement with randomly oriented fibers has attracted extensive research attention. The shear strength of fiber-reinforced soils is often determined experimentally by performing triaxial compression tests under effective stress conditions. Presented in this paper are easy-to-use models for the strength prediction of fiber-reinforced soils under the aforementioned testing conditions. After an extensive literature review, a database of 436 measurements was created including data for all independent variables relative to the soil and fiber characteristics. This database was then processed and divided into two subsets: the first, consisting of 75% of the measurements, was used to develop the models by performing statistical analyses, whereas the second, with the remaining 25% of the measurements, served as a basis for their validation. The development of the models was achieved through multivariable linear regression analyses performed with suitable statistical software. After an extensive number of trials, three optimal models were derived that satisfy the statistical requirements, exhibiting R2 determination coefficients greater than 0.95 and satisfactory estimation of the validation measurements at a rate reaching 81%.


  • Open Access

    Mechanical Behavior of Fiber-Reinforced Soils under Undrained Triaxial Loading Conditions

    by Evangelos D. Evangelou, Ioannis N. Markou, Sofia E. Verykaki, Konstantinos E. Bantralexis

    The design of fiber-reinforced soil structures, such as embankments and pavements, can be carried out using the results of unconsolidated, undrained triaxial compression tests conducted on specimens at their “as-compacted” water content and analyzed in terms of total stresses. The effects of soil and fiber type on the mechanical behavior of fiber-reinforced soils have not been methodically or adequately examined in the past under these conditions, and the effects of fiber length and content on the shear strength parameters of fiber-reinforced soils need further experimental documentation. Accordingly, five soils ranging from “excellent” to “poor” materials for use in earthwork structures were tested in the present study, in combination with five types of polypropylene fibers having lengths ranging from 9 to 50 mm. Unconsolidated undrained triaxial compression tests were conducted on specimens at their “as-compacted” water content, with fiber contents ranging from 0.5 to 2% by weight of dry soil. Fiber reinforcement reduces the stiffness and increases the deformability of the soil. The fiber-reinforced soils exhibit a more ductile behavior in comparison with the unreinforced soils. A Mohr–Coulomb type linear failure criterion satisfactorily describes the shear strength behavior of fiber-reinforced soils in total stress terms. The cohesion values of the fiber-reinforced soils range between 61 kPa and 301 kPa and increase up to seven times in comparison with the cohesion values of the unreinforced soils. The variations of the angle of internal friction of soils due to fiber reinforcement are generally limited to ±25%. The cohesion improvement due to fiber reinforcement is increased with increasing fiber content and fiber length up to 30 mm and is inversely proportional to the fine-grained fraction and the cohesion of the unreinforced soil.


  • Open Access

    Use of sand pore-size distribution to predict cement suspension groutability

    by Konstantinos E. Bantralexis, Ioannis N. Markou, Georgios I. Zografos