Xianfeng Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xianfeng Tang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Xiangqiang Li
School of Physics Science and Technology, Southwest Jiaotong University, Chengdu 610031, China
4 shared publications - Qingfeng Wang
School of Physical Science and Technology, Southwest Jiaotong University, Chengdu 610031, China
3 shared publications - Jianqiong Zhang
School of Physics Science and Technology, Southwest Jiaotong University, Chengdu 610031, China
2 shared publications - Ying Xiong
Chengdu College, University of Electronic Science and Technology of China, Chengdu 611731, China
2 shared publications - Chao Jiang
Chengdu College, University of Electronic Science and Technology of China, Chengdu 611731, China
1 shared publication - Che Xu
School of Physical Science and Technology, Southwest Jiaotong University, Chengdu, China
1 shared publication
Latest Publications
- Open Access
- 22 May 2026
- Published by MDPI AG in Electronics
- Vol. 15 (11) , 2232
Design of a Rapid License Plate Localization Algorithm Utilizing Color Statistical Features
Aiming at the problems of weak background adaptive ability, high dependence on edge features, high computational complexity of some traditional license plate location algorithms, high deployment cost and strong training dependence of location model based on deep learning, this paper proposes a fast license plate location algorithm based on statistical color features. The algorithm uses the HSV color space as the main processing channel, and quantifies the regional color distribution characteristics by constructing the hue histogram and calculating its standard deviation and other statistics, which significantly improves the discrimination and illumination adaptability of the license plate mask in complex background. Compared with the lightweight deep learning models such as “You Only Look Once Version 12 Nano”, this algorithm does not need GPU acceleration and model loading, eliminates the need for data training, significantly reduces the deployment cost and complexity, and can run efficiently on the general computing platform. The experimental results show that compared with the YOLOv12n model, the average processing time of this algorithm is shortened by 30.81% (when YOLOv12n is evaluated with GPU) or 48.42% (when YOLOv12n is evaluated with CPU) at the cost of sacrificing about 5.8% positioning accuracy. The positioning accuracy still reaches 93.7%, demonstrating high processing efficiency and excellent platform adaptability. The algorithm has the advantages of being lightweight, efficient and interpretable, and is especially suitable for intelligent parking lots, edge devices and other scenes sensitive to real time, cost and energy consumption.
- 22 May 2026
- Published by MDPI AG in Electronics
- Vol. 15 (11) , 2232
Open AccessDesign of a Rapid License Plate Localization Algorithm Utilizing Color Statistical Features
Aiming at the problems of weak background adaptive ability, high dependence on edge features, high computational complexity of some traditional license plate location algorithms, high deployment cost and strong training dependence of location model based on deep learning, this paper proposes a fast license plate location algorithm based on statistical color features. The algorithm uses the HSV color space as the main processing channel, and quantifies the regional color distribution characteristics by constructing the hue histogram and calculating its standard deviation and other statistics, which significantly improves the discrimination and illumination adaptability of the license plate mask in complex background. Compared with the lightweight deep learning models such as “You Only Look Once Version 12 Nano”, this algorithm does not need GPU acceleration and model loading, eliminates the need for data training, significantly reduces the deployment cost and complexity, and can run efficiently on the general computing platform. The experimental results show that compared with the YOLOv12n model, the average processing time of this algorithm is shortened by 30.81% (when YOLOv12n is evaluated with GPU) or 48.42% (when YOLOv12n is evaluated with CPU) at the cost of sacrificing about 5.8% positioning accuracy. The positioning accuracy still reaches 93.7%, demonstrating high processing efficiency and excellent platform adaptability. The algorithm has the advantages of being lightweight, efficient and interpretable, and is especially suitable for intelligent parking lots, edge devices and other scenes sensitive to real time, cost and energy consumption.
- Open Access
- 7 November 2024
- Published by MDPI AG in Electronics
- Vol. 13 (22) , 4370
A Tunable Microstrip-to-Waveguide Transition for Emergency Satellite Communication Systems
A tunable microstrip-to-waveguide transition is proposed for the ground station of emergency satellite communication systems. The proposed transition, consisting of a microstrip, three matched patches, three waveguides, and three metal screws, can not only convert the microstrip’s TEM-dominated mode into the waveguide’s TE mode within the transmitting frequency band, but also possesses the ability to filter out the amplified noise signals within the receiving frequency band around 12.5 GHz. Importantly, by adjusting the screws’ lengths, it is feasible to change the suppression frequency within the receiving frequency band and keep a good match within the transmitting frequency band. The measured results demonstrate that the proposed transition has a return loss of over 10 dB from 14 to 14.5 GHz and an out-of-band suppression of over 20 dB, from 12.25 to 12.7 GHz, with a typical value of −48 dB around 12.55 GHz. This unique feature eliminates the need for additional waveguide filters that prevent the amplified noise signal, thereby contributing to the miniaturization of the ground station.
- 7 November 2024
- Published by MDPI AG in Electronics
- Vol. 13 (22) , 4370
Open AccessA Tunable Microstrip-to-Waveguide Transition for Emergency Satellite Communication Systems
A tunable microstrip-to-waveguide transition is proposed for the ground station of emergency satellite communication systems. The proposed transition, consisting of a microstrip, three matched patches, three waveguides, and three metal screws, can not only convert the microstrip’s TEM-dominated mode into the waveguide’s TE mode within the transmitting frequency band, but also possesses the ability to filter out the amplified noise signals within the receiving frequency band around 12.5 GHz. Importantly, by adjusting the screws’ lengths, it is feasible to change the suppression frequency within the receiving frequency band and keep a good match within the transmitting frequency band. The measured results demonstrate that the proposed transition has a return loss of over 10 dB from 14 to 14.5 GHz and an out-of-band suppression of over 20 dB, from 12.25 to 12.7 GHz, with a typical value of −48 dB around 12.55 GHz. This unique feature eliminates the need for additional waveguide filters that prevent the amplified noise signal, thereby contributing to the miniaturization of the ground station.
- Open Access
- 10 August 2024
- Published by MDPI AG in Electronics
- Vol. 13 (16) , 3158
A Metamaterial Bandpass Filter with End-Fire Coaxial Coupling
A miniaturized metamaterial (MTM) bandpass filter (BPF) based on end-fire coaxial coupling is proposed. End-fire coaxial coupling is achieved by using the coaxial cavity to connect with the SubMiniature version A connector. The subwavelength characteristics of the MTM lead to the miniaturization advantages of the filter in transverse dimensions. Moreover, the longitudinal length of the coaxial cavity can be sharply reduced by introducing matched blocks. As a result, the proposed filter has miniaturization merit both in transverse and longitudinal dimensions. The full-wave simulation results further reveal that the MTM BPF exhibits the advantages of low loss, low reflection, and low group delay. Additionally, the fractional bandwidth is approximately 13% when |S11| is less than −15 dB. The MTM BPF might have potential applications to array antennas for easily being expanded to two dimensional arrays.
- 10 August 2024
- Published by MDPI AG in Electronics
- Vol. 13 (16) , 3158
Open AccessA Metamaterial Bandpass Filter with End-Fire Coaxial Coupling
A miniaturized metamaterial (MTM) bandpass filter (BPF) based on end-fire coaxial coupling is proposed. End-fire coaxial coupling is achieved by using the coaxial cavity to connect with the SubMiniature version A connector. The subwavelength characteristics of the MTM lead to the miniaturization advantages of the filter in transverse dimensions. Moreover, the longitudinal length of the coaxial cavity can be sharply reduced by introducing matched blocks. As a result, the proposed filter has miniaturization merit both in transverse and longitudinal dimensions. The full-wave simulation results further reveal that the MTM BPF exhibits the advantages of low loss, low reflection, and low group delay. Additionally, the fractional bandwidth is approximately 13% when |S11| is less than −15 dB. The MTM BPF might have potential applications to array antennas for easily being expanded to two dimensional arrays.
- Open Access
- 13 July 2023
- Published by MDPI AG in Electronics
- Vol. 12 (14) , 3062
Miniaturized Metamaterial-Inspired Travelling Wave Tube for S Band
A miniaturized traveling wave tube (TWT) was studied by proposing a novel metamaterial (MTM) slow wave structure (SWS). The dispersion results show that n = −1 space harmonic of the fundamental mode exhibits the “forward” wave properties, which is the foundation of the MTM-inspired TWT. Meanwhile, the interaction impedance for mode 2 of the novel MTM SWS can be sharply decreased by introducing four blend edges to weaken the corresponding longitudinal electric field. Also, two coaxial couplers are presented to input/output the signals. The transmission results show that the reflection is as low as −15 dB from 2.90 GHz to 3 GHz, which ensures the amplified signal can be effectively outputted. The MTM-inspired TWT exhibits miniaturized superiority for its compact high frequency structure including the MTM SWS and the coaxial couplers. Especially, for the high-frequency structure, the transverse and longitudinal sizes are ~λ/5 and ~3λ, respectively (λ is the free-space wavelength at the operating frequencies). The simulation of the beam wave interaction shows that the proposed MTM-inspired TWT yields output powers of kW levels from 2.90 GHz to 3 GHz, with a gain of 23.5–25.8 dB and electronic efficiency of 14–22% when the beam current is 0.5 A and the beam voltage is 13 kV. The results indicate that the gain per wavelength is as high as 8.5 dB in the operating bands. The simulation results confirm that it is possible to weaken the backward wave oscillation from the higher mode in the miniaturized MTM-inspired TWT.
- 13 July 2023
- Published by MDPI AG in Electronics
- Vol. 12 (14) , 3062
Open AccessMiniaturized Metamaterial-Inspired Travelling Wave Tube for S Band
A miniaturized traveling wave tube (TWT) was studied by proposing a novel metamaterial (MTM) slow wave structure (SWS). The dispersion results show that n = −1 space harmonic of the fundamental mode exhibits the “forward” wave properties, which is the foundation of the MTM-inspired TWT. Meanwhile, the interaction impedance for mode 2 of the novel MTM SWS can be sharply decreased by introducing four blend edges to weaken the corresponding longitudinal electric field. Also, two coaxial couplers are presented to input/output the signals. The transmission results show that the reflection is as low as −15 dB from 2.90 GHz to 3 GHz, which ensures the amplified signal can be effectively outputted. The MTM-inspired TWT exhibits miniaturized superiority for its compact high frequency structure including the MTM SWS and the coaxial couplers. Especially, for the high-frequency structure, the transverse and longitudinal sizes are ~λ/5 and ~3λ, respectively (λ is the free-space wavelength at the operating frequencies). The simulation of the beam wave interaction shows that the proposed MTM-inspired TWT yields output powers of kW levels from 2.90 GHz to 3 GHz, with a gain of 23.5–25.8 dB and electronic efficiency of 14–22% when the beam current is 0.5 A and the beam voltage is 13 kV. The results indicate that the gain per wavelength is as high as 8.5 dB in the operating bands. The simulation results confirm that it is possible to weaken the backward wave oscillation from the higher mode in the miniaturized MTM-inspired TWT.
- Open Access
- 11 July 2023
- Published by MDPI AG in Electronics
- Vol. 12 (14) , 3037
Study on the Simulation of the EMU Body Operating Main Breaker Overvoltage and High-Voltage Side Suppression Method Based on the 3D Structure
Current circuit simulation research on EMU (Electric Multiple Unit) overvoltage has focused on overvoltage amplitude distribution and the oscillation frequency of the operating main circuit breaker overvoltage. However, when studying the suppression method, the overvoltage amplitude and frequency characteristics must be considered simultaneously, and few studies have reported on the overvoltage frequency distribution. In this paper, a new simulation model of train-operational main breaker overvoltage based on the 3D structure of the EMU body was proposed, which provided guidance for the study of overvoltage suppression in operational main circuit breakers. This model simulated the transient overvoltage characteristics and distribution of the vehicle body when the train operated the main circuit breaker. The simulated results showed that the first vehicle had the highest operating overvoltage amplitude, and the fourth vehicle had the lowest. The overvoltage amplitudes of vehicles 1–4 were all above 1 kV, and the main overvoltage oscillation frequencies of each vehicle were at 0.70 MHz and 1.30 MHz. The accuracy of the distribution characteristics and spectral characteristics of the operating main breaker overvoltage was verified by static tests on trains, and the simulation was considered to be in agreement with the test. Aiming at the problem that there was no universal suppression method for the operating main breaker overvoltage, a general suppression method for the overvoltage on the high-voltage side of the EMU was studied, and an overvoltage suppression device based on a grounding inductor was proposed. The inductance parameter requirements of the suppressor were theoretically analyzed, and the validity of the design of the inductance suppressor was experimentally verified.
- 11 July 2023
- Published by MDPI AG in Electronics
- Vol. 12 (14) , 3037
Open AccessStudy on the Simulation of the EMU Body Operating Main Breaker Overvoltage and High-Voltage Side Suppression Method Based on the 3D Structure
Current circuit simulation research on EMU (Electric Multiple Unit) overvoltage has focused on overvoltage amplitude distribution and the oscillation frequency of the operating main circuit breaker overvoltage. However, when studying the suppression method, the overvoltage amplitude and frequency characteristics must be considered simultaneously, and few studies have reported on the overvoltage frequency distribution. In this paper, a new simulation model of train-operational main breaker overvoltage based on the 3D structure of the EMU body was proposed, which provided guidance for the study of overvoltage suppression in operational main circuit breakers. This model simulated the transient overvoltage characteristics and distribution of the vehicle body when the train operated the main circuit breaker. The simulated results showed that the first vehicle had the highest operating overvoltage amplitude, and the fourth vehicle had the lowest. The overvoltage amplitudes of vehicles 1–4 were all above 1 kV, and the main overvoltage oscillation frequencies of each vehicle were at 0.70 MHz and 1.30 MHz. The accuracy of the distribution characteristics and spectral characteristics of the operating main breaker overvoltage was verified by static tests on trains, and the simulation was considered to be in agreement with the test. Aiming at the problem that there was no universal suppression method for the operating main breaker overvoltage, a general suppression method for the overvoltage on the high-voltage side of the EMU was studied, and an overvoltage suppression device based on a grounding inductor was proposed. The inductance parameter requirements of the suppressor were theoretically analyzed, and the validity of the design of the inductance suppressor was experimentally verified.
- Open Access
- 27 June 2023
- Published by MDPI AG in Electronics
- Vol. 12 (13) , 2844
A Wide-Band Modeling Research of Voltage Transformer in EMU
Considering that current voltage transformer models of electrical multiple units (EMUs) are narrow-band models or transformer models, this paper introduces a wide-band model of EMU voltage transformers based on the vector fitting method, circuit synthesis theory and black-box model theory. The admittances of voltage transformers from 30 kHz to 5 MHz are measured by the vector network analyzer, the branch admittances in the pi-type equivalent circuit are calculated according to the equation of a two-port network equivalent circuit. Based on the vector matching method, the rational function formulas of branch admittances are obtained, and the formulas are converted into the circuit models by circuit synthesis theory. The pi-type equivalent circuit model is constructed in the simulation software, and so is the voltage transformer model in the range of 30 kHz–5 MHz. The frequency sweeping method is used to measure the transmission characteristics from direct current (DC)to 30 kHz. The pi-type model is modified according to transmission characteristics, whereby the wide-band model in DC-5 MHz is obtained. Fast pulse experiments are carried out on the voltage transformer, and the actual injected fast pulse voltage is used as the excitation source in the simulation model. The measurement and simulation results on the secondary side of the voltage transformer show that the wide-band model has a high accuracy.
- 27 June 2023
- Published by MDPI AG in Electronics
- Vol. 12 (13) , 2844
Open AccessA Wide-Band Modeling Research of Voltage Transformer in EMU
Considering that current voltage transformer models of electrical multiple units (EMUs) are narrow-band models or transformer models, this paper introduces a wide-band model of EMU voltage transformers based on the vector fitting method, circuit synthesis theory and black-box model theory. The admittances of voltage transformers from 30 kHz to 5 MHz are measured by the vector network analyzer, the branch admittances in the pi-type equivalent circuit are calculated according to the equation of a two-port network equivalent circuit. Based on the vector matching method, the rational function formulas of branch admittances are obtained, and the formulas are converted into the circuit models by circuit synthesis theory. The pi-type equivalent circuit model is constructed in the simulation software, and so is the voltage transformer model in the range of 30 kHz–5 MHz. The frequency sweeping method is used to measure the transmission characteristics from direct current (DC)to 30 kHz. The pi-type model is modified according to transmission characteristics, whereby the wide-band model in DC-5 MHz is obtained. Fast pulse experiments are carried out on the voltage transformer, and the actual injected fast pulse voltage is used as the excitation source in the simulation model. The measurement and simulation results on the secondary side of the voltage transformer show that the wide-band model has a high accuracy.
- Open Access
- 9 April 2023
- Published by MDPI AG in Electronics
- Vol. 12 (8) , 1776
Study on Electromagnetic Radiation Characteristics Based on HTS Maglev Levitation Test Line
As a new type of magnetic levitation train with the characteristics of self-stabilization and self-suspension, high-temperature superconducting magnetic levitation has developed to the test line research stage. In order to promote the rapid development of high-temperature superconducting magnetic levitation train engineering, and the main electromagnetic radiation sources are clarified by analyzing their working principles and structures. Then Ansoft Maxwell EM was used to build a 3D magnetic levitation train electromagnetic environment simulation model to simulate and predict the electromagnetic radiation characteristics of the magnetic levitation train system. Finally, a field EMF test was carried out to verify and assess the impact on the EM environment in the system. The results show that the permanent magnet track on the ground and the synchronous linear motor are the primary electromagnetic radiation sources, and the generated fields are mainly low-frequency fields and static magnetic fields. The low-frequency magnetic field inside the train decreases with the increase of frequency and is partially shielded by the carriage; The static magnetic field cannot be weakened by the carriage, and the static magnetic field inside the car decreases with the increase of height. All types of electromagnetic fields are far below the requirements of the relevant electromagnetic environmental standard limits, and have no effect on the electromagnetic radiation safety of the personnel inside the train and the surrounding environment; In considering of the special people who have pacemakers, static magnetic field suppression measures are studied, and the results show that the trains with high magnetic permeability permalloy as the shielding layer at the bottom of the vehicle greatly lower the static magnetic field within the train.
- 9 April 2023
- Published by MDPI AG in Electronics
- Vol. 12 (8) , 1776
Open AccessStudy on Electromagnetic Radiation Characteristics Based on HTS Maglev Levitation Test Line
As a new type of magnetic levitation train with the characteristics of self-stabilization and self-suspension, high-temperature superconducting magnetic levitation has developed to the test line research stage. In order to promote the rapid development of high-temperature superconducting magnetic levitation train engineering, and the main electromagnetic radiation sources are clarified by analyzing their working principles and structures. Then Ansoft Maxwell EM was used to build a 3D magnetic levitation train electromagnetic environment simulation model to simulate and predict the electromagnetic radiation characteristics of the magnetic levitation train system. Finally, a field EMF test was carried out to verify and assess the impact on the EM environment in the system. The results show that the permanent magnet track on the ground and the synchronous linear motor are the primary electromagnetic radiation sources, and the generated fields are mainly low-frequency fields and static magnetic fields. The low-frequency magnetic field inside the train decreases with the increase of frequency and is partially shielded by the carriage; The static magnetic field cannot be weakened by the carriage, and the static magnetic field inside the car decreases with the increase of height. All types of electromagnetic fields are far below the requirements of the relevant electromagnetic environmental standard limits, and have no effect on the electromagnetic radiation safety of the personnel inside the train and the surrounding environment; In considering of the special people who have pacemakers, static magnetic field suppression measures are studied, and the results show that the trains with high magnetic permeability permalloy as the shielding layer at the bottom of the vehicle greatly lower the static magnetic field within the train.