A. P. Hryhorovskyi
A. P. Hryhorovskyi has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Olena Murasova
SE "Research institute of construction production named after V.S. Balytskyi", Kyiv
3 shared publications - Andrii Bronevytskyi
ДП «Науково-дослідний інститут будівельного виробництва ім. В.С. Балицького», м. Київ
2 shared publications - O.V. Ben
The State "Research institute of building production named V.S. Balitsky", Kyiv
2 shared publications - Yu. V. Kroshka
The State "Research institute of building production named V.S. Balitsky", Kyiv
2 shared publications O. Murasyova
ДП «Науково-дослідний інститут будівельного виробництва», м. Київ
1 shared publication- Olena Gorda
Київський національний університет будівництва і архітектури, Київ
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81
GEODESIC WORKS DURING CONSTRUCTION AND OPERATION OF BUILDING STRUCTURES AS A COMPONENT OF THE SURVEYING CONCEPT
The article is devoted to the analysis of the role of geodetic works as a direct element of the surveying concept in the life cycle management of real estate objects. Geodetic works are considered as an integral part of ensuring the accuracy, safety and efficiency of construction processes, which cont-ributes to the extension of the service life of objects and increasing their socio-economic value. Modern approaches to the performance of geodetic works at the stages of construction and operation of buil-dings and structures are considered in the context of integration into the surveying concept. It is empha-sized that geodetic support ceases to be only an auxiliary function in the construction process and turns into an integral part of the object management system throughout its entire life cycle. The main tasks performed by geodesists during the construction of structures are analyzed, in particular, the creation of a geodetic base, transferring the project to nature, executive surveying, control of installation accuracy, as well as deformation monitoring. Special attention is paid to geodetic monitoring during the operational period, which allows for timely detection of dangerous changes in the spatial position of structural elements. The article substantiates the feasibility of using modern surveying tools - 3D scanning, robotic total stations, satellite positioning systems (GNSS), unmanned aerial vehicles and geoinformation technologies (GIS) and integration with BIM modeling, which significantly expand the capabilities of engineering and geodetic control. It is pro-posed to consider a surveyor as a participant in management decisions in the field of construction, who operates with spatial data, forms analytical conclusions and provides digital management of objects. Using the example of research by SE "NIIBV", organizational and technological solutions for the use of instrumental monitoring systems in the construction and operation of buildings of various types, inclu-ding historical buildings and objects located in difficult engineering and geological conditions are sub-stantiated. The results of domestic and foreign studies on the implementation of the surveying concept are summarized, confirming its effectiveness both in increasing the reliability of structures and in opti-mizing costs, duration and legal support of construction processes. The conclusions emphasize that the integration of geodetic works into the surveying concept contributes to increased safety, reduced acci-dent risks and optimization of operating costs, which is critically important for modern construction in the context of urbanization and complex geological challenges.
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81
Open AccessGEODESIC WORKS DURING CONSTRUCTION AND OPERATION OF BUILDING STRUCTURES AS A COMPONENT OF THE SURVEYING CONCEPT
The article is devoted to the analysis of the role of geodetic works as a direct element of the surveying concept in the life cycle management of real estate objects. Geodetic works are considered as an integral part of ensuring the accuracy, safety and efficiency of construction processes, which cont-ributes to the extension of the service life of objects and increasing their socio-economic value. Modern approaches to the performance of geodetic works at the stages of construction and operation of buil-dings and structures are considered in the context of integration into the surveying concept. It is empha-sized that geodetic support ceases to be only an auxiliary function in the construction process and turns into an integral part of the object management system throughout its entire life cycle. The main tasks performed by geodesists during the construction of structures are analyzed, in particular, the creation of a geodetic base, transferring the project to nature, executive surveying, control of installation accuracy, as well as deformation monitoring. Special attention is paid to geodetic monitoring during the operational period, which allows for timely detection of dangerous changes in the spatial position of structural elements. The article substantiates the feasibility of using modern surveying tools - 3D scanning, robotic total stations, satellite positioning systems (GNSS), unmanned aerial vehicles and geoinformation technologies (GIS) and integration with BIM modeling, which significantly expand the capabilities of engineering and geodetic control. It is pro-posed to consider a surveyor as a participant in management decisions in the field of construction, who operates with spatial data, forms analytical conclusions and provides digital management of objects. Using the example of research by SE "NIIBV", organizational and technological solutions for the use of instrumental monitoring systems in the construction and operation of buildings of various types, inclu-ding historical buildings and objects located in difficult engineering and geological conditions are sub-stantiated. The results of domestic and foreign studies on the implementation of the surveying concept are summarized, confirming its effectiveness both in increasing the reliability of structures and in opti-mizing costs, duration and legal support of construction processes. The conclusions emphasize that the integration of geodetic works into the surveying concept contributes to increased safety, reduced acci-dent risks and optimization of operating costs, which is critically important for modern construction in the context of urbanization and complex geological challenges.
- Open Access
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 42-47
THE NEED FOR HARMONIZATION OF NATIONAL STANDARDS OF UKRAINE WITH INTERNATIONAL REQUIREMENTS FOR MEASUREMENTS AND TOLERANCES IN CONSTRUCTION
The article explores the scientific and technical foundations for harmonizing Ukraine’s national regulatory framework in the construction sector with international ISO standards, in particular the series ISO 3443, ISO 4463, ISO 7077, ISO 7727, ISO 7976, and ISO 12491, which regulate the requirements for geometric parameters, accuracy, tolerances, measurement methods, and statistical quality control of building structures. In the context of Ukraine’s European integration processes, the paper emphasizes the need to develop and implement identical national standards (DSTU) to ensure compliance with international requirements and to facilitate integration into the European technical space. The article provides a systematic analysis of each ISO series, revealing their structural logic, functional focus, and potential to improve installation accuracy, unify modular construction elements, reduce defects caused by measurement errors, and optimize construction processes. Special attention is given to the role of harmonization in enabling the digital transformation of the industry, particularly the implementation of Building Information Modeling (BIM) technologies, the transition to coordinated modular design, and integration into a unified European regulatory and technical space. It is substantiated that harmonization is a prerequisite for the mutual recognition of measurement results and the certification of construction products in international cooperation, which will contribute to expanding Ukraine’s export potential. It has been determined that the current regulatory framework has the potential for further alignment with the provisions of ISO series 3443, 4463, 7077, 7727, 7976, and 12491, which currently complicates the international recognition of geodetic measurement results and certification of construction products. The paper highlights the role of ISO standards as an integrated system covering modular size coordination, rules for the design and assembly of structures, organization of measurement work, compliance verification, and the application of statistical methods for quality control. The need to ensure compatibility of national standards with modern digital technologies, particularly Building Information Modeling (BIM), laser scanning, and automation of geodetic processes, is highlighted. The implementation of harmonized standards will contribute to minimizing defects and costs during construction, enhancing engineering safety, promoting the development of modular construction, and creating conditions for Ukrainian construction companies to enter international markets. The article may be useful for professionals in the fields of geodesy, design, regulation, standardization, as well as for technical regulatory bodies involved in the modernization of Ukraine’s construction sector.
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 42-47
Open AccessTHE NEED FOR HARMONIZATION OF NATIONAL STANDARDS OF UKRAINE WITH INTERNATIONAL REQUIREMENTS FOR MEASUREMENTS AND TOLERANCES IN CONSTRUCTION
The article explores the scientific and technical foundations for harmonizing Ukraine’s national regulatory framework in the construction sector with international ISO standards, in particular the series ISO 3443, ISO 4463, ISO 7077, ISO 7727, ISO 7976, and ISO 12491, which regulate the requirements for geometric parameters, accuracy, tolerances, measurement methods, and statistical quality control of building structures. In the context of Ukraine’s European integration processes, the paper emphasizes the need to develop and implement identical national standards (DSTU) to ensure compliance with international requirements and to facilitate integration into the European technical space. The article provides a systematic analysis of each ISO series, revealing their structural logic, functional focus, and potential to improve installation accuracy, unify modular construction elements, reduce defects caused by measurement errors, and optimize construction processes. Special attention is given to the role of harmonization in enabling the digital transformation of the industry, particularly the implementation of Building Information Modeling (BIM) technologies, the transition to coordinated modular design, and integration into a unified European regulatory and technical space. It is substantiated that harmonization is a prerequisite for the mutual recognition of measurement results and the certification of construction products in international cooperation, which will contribute to expanding Ukraine’s export potential. It has been determined that the current regulatory framework has the potential for further alignment with the provisions of ISO series 3443, 4463, 7077, 7727, 7976, and 12491, which currently complicates the international recognition of geodetic measurement results and certification of construction products. The paper highlights the role of ISO standards as an integrated system covering modular size coordination, rules for the design and assembly of structures, organization of measurement work, compliance verification, and the application of statistical methods for quality control. The need to ensure compatibility of national standards with modern digital technologies, particularly Building Information Modeling (BIM), laser scanning, and automation of geodetic processes, is highlighted. The implementation of harmonized standards will contribute to minimizing defects and costs during construction, enhancing engineering safety, promoting the development of modular construction, and creating conditions for Ukrainian construction companies to enter international markets. The article may be useful for professionals in the fields of geodesy, design, regulation, standardization, as well as for technical regulatory bodies involved in the modernization of Ukraine’s construction sector.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (54) , 24-33
Recycling of construction materials in Ukraine: legislation, current state, issues, and future prospects for the market of reusing damaged structures
In today's world, the issue of waste recycling and disposal has reached a large scale. With the continuous development of major cities, construction waste constitutes a significant portion of all waste generated by global economies. Dismantling, recycling, and reusing construction materials is known as recycling, which is a widely recognized concept in developed countries. In Ukraine, where the construction sector was one of the key economic sectors even before the onset of the large-scale aggression by the Russian Federation, the issue of recycling is particularly relevant. Furthermore, since the outbreak of military actions in 2022, the volume of construction waste has significantly increased due to the large number of destroyed buildings and infrastructure facilities. This has led to additional environmental challenges, issues regarding efficient resource use, and the collection and recycling of waste. According to various estimates, up to 30% of all waste is attributed to that generated as a result of military actions. Globally, recycling construction waste is a highly profitable industry. Leading countries have established markets for companies operating in this sector. In most European countries, the level of recycling is quite high. For instance, in the Netherlands, about 90% of construction waste is reused, followed by Belgium at 87%, Denmark at 81%, the United Kingdom at 45%, Finland at 43%, and Austria at 41%. Currently, Ukraine lacks a market for the reuse of construction waste, which negatively impacts the environment and complicates the effective use of secondary materials. The aim of this research is to analyze the existing situation in the recycling sector in Ukraine, taking into account the specific challenges posed by military actions, and to develop recommendations for improving the management system for construction waste. In the context of global challenges related to climate change and sustainable development, the study of recycling construction materials in Ukraine becomes particularly significant. Developing effective technologies and implementing innovative solutions could be a key factor in restoring damaged infrastructure and reducing negative environmental impacts.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (54) , 24-33
Open AccessRecycling of construction materials in Ukraine: legislation, current state, issues, and future prospects for the market of reusing damaged structures
In today's world, the issue of waste recycling and disposal has reached a large scale. With the continuous development of major cities, construction waste constitutes a significant portion of all waste generated by global economies. Dismantling, recycling, and reusing construction materials is known as recycling, which is a widely recognized concept in developed countries. In Ukraine, where the construction sector was one of the key economic sectors even before the onset of the large-scale aggression by the Russian Federation, the issue of recycling is particularly relevant. Furthermore, since the outbreak of military actions in 2022, the volume of construction waste has significantly increased due to the large number of destroyed buildings and infrastructure facilities. This has led to additional environmental challenges, issues regarding efficient resource use, and the collection and recycling of waste. According to various estimates, up to 30% of all waste is attributed to that generated as a result of military actions. Globally, recycling construction waste is a highly profitable industry. Leading countries have established markets for companies operating in this sector. In most European countries, the level of recycling is quite high. For instance, in the Netherlands, about 90% of construction waste is reused, followed by Belgium at 87%, Denmark at 81%, the United Kingdom at 45%, Finland at 43%, and Austria at 41%. Currently, Ukraine lacks a market for the reuse of construction waste, which negatively impacts the environment and complicates the effective use of secondary materials. The aim of this research is to analyze the existing situation in the recycling sector in Ukraine, taking into account the specific challenges posed by military actions, and to develop recommendations for improving the management system for construction waste. In the context of global challenges related to climate change and sustainable development, the study of recycling construction materials in Ukraine becomes particularly significant. Developing effective technologies and implementing innovative solutions could be a key factor in restoring damaged infrastructure and reducing negative environmental impacts.
- Open Access
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (52) , 12-21
Technical inspection of buildings and construction: modern approaches and solutions
In this article, the authors try to outline modern technological solutions that are used in the practice of performing technical inspections of buildings and structures, as well as to analyze the leading technological achievements in the theory of performing these works. During the last year, as a result of military actions caused by the aggression of the Russian Federation, about 150 thousand buildings and structures were destroyed or damaged in Ukraine, including more than 17.5 thousand multi-apartment residential buildings. Damaged buildings and structures require a technical inspection to determine their further repair, reconstruction or controlled dismantling and new reconstruction. In Ukraine, the process of restoring damaged social, economic and residential buildings is already underway. Monitoring and periodic inspection of the condition of restored buildings are important parts of the facility management system, as it allows timely detection and response to any damage or deviations from normal functioning, which can ensure safety and extend the service life of the structure. The scope of work on technical inspection and their special conditions determine the need for effective performance of work with the possibility of applying modern approaches and solutions. Information is given about the main authors of scientific research on this topic, the names of foreign companies that are the drivers of the market of modern building inspection technologies are indicated. The main commonly known methods of inspection of buildings and structures are analyzed, their types are systematized. Among modern technologies, the main attention is paid to the use of unmanned aerial vehicles, as such, which have become widespread in the developed countries of the world. The advantages of using this technology are indicated, as well as the problems accompanying the practical commercial use of unmanned aerial vehicles during the technical inspection of buildings. Prospective topics for further research in this field of science are proposed, in particular, to develop a methodology for the economic feasibility and effectiveness of using one or another innovative method of examination.
- 24 November 2023
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (52) , 12-21
Open AccessTechnical inspection of buildings and construction: modern approaches and solutions
In this article, the authors try to outline modern technological solutions that are used in the practice of performing technical inspections of buildings and structures, as well as to analyze the leading technological achievements in the theory of performing these works. During the last year, as a result of military actions caused by the aggression of the Russian Federation, about 150 thousand buildings and structures were destroyed or damaged in Ukraine, including more than 17.5 thousand multi-apartment residential buildings. Damaged buildings and structures require a technical inspection to determine their further repair, reconstruction or controlled dismantling and new reconstruction. In Ukraine, the process of restoring damaged social, economic and residential buildings is already underway. Monitoring and periodic inspection of the condition of restored buildings are important parts of the facility management system, as it allows timely detection and response to any damage or deviations from normal functioning, which can ensure safety and extend the service life of the structure. The scope of work on technical inspection and their special conditions determine the need for effective performance of work with the possibility of applying modern approaches and solutions. Information is given about the main authors of scientific research on this topic, the names of foreign companies that are the drivers of the market of modern building inspection technologies are indicated. The main commonly known methods of inspection of buildings and structures are analyzed, their types are systematized. Among modern technologies, the main attention is paid to the use of unmanned aerial vehicles, as such, which have become widespread in the developed countries of the world. The advantages of using this technology are indicated, as well as the problems accompanying the practical commercial use of unmanned aerial vehicles during the technical inspection of buildings. Prospective topics for further research in this field of science are proposed, in particular, to develop a methodology for the economic feasibility and effectiveness of using one or another innovative method of examination.
- Open Access
- 24 December 2022
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 3-4(99-100,p. 79-86
DEVELOPMENT OF BUILDING INFORMATION MODELS OF THE PROCESS OF REMOTE SURVEYING OF EMERGENCY BUILDINGS USING UAVS
Purpose. The adoption of organizational and technological solutions for the elimination of the consequences of accidental destruction of buildings due to overtime effects due to military actions is based on the prompt receipt of information about the technical condition of the object, since the performance of priority emergency and rescue work immediately after a disaster or accident, when there is a threat to human life, requires the rapid adoption of such decisions in conditions of uncertainty regarding the prevention of secondary destruction. It is possible to minimize the duration of the decision-making process under conditions of uncertainty by optimizing the technology of obtaining information, that is, the survey process using automated remotely controlled aircraft in combination with building information modeling of the process of obtaining and processing information about the technical condition of the object. Methodology. Analysis and consideration of factors affecting the bearing capacity and organizational and technological features of the process of loss of strength of concrete and reinforced concrete building elements in case of detonation of an open charge on their surface, depending on the growth and fusion of microcracks under the influence of applied stresses for the compilation of an information model of dynamic destruction. The results. Based on the results of the analysis of the process of remote inspection of buildings damaged as a result of military operations using unmanned aerial vehicles, the authors developed a method of building information modeling of partial destruction of large-panel buildings due to extra-design influences. The stages of construction of the information model of the object are given. Findings. Based on the results of the analysis of the process of remote inspection of buildings damaged as a result of military operations using unmanned aerial vehicles, the authors developed a method of building information modeling of partial destruction of large-panel buildings due to extra-design influences. The stages of construction of the information model of the object are given. Originality. For the first time, a method of building information modeling of partial destruction of large-panel buildings due to extra-project influences has been developed to optimize organizational and technological solutions for strengthening structures in the centers of such destruction for the possibility of emergency rescue operations. Practical value. It consists in minimizing the duration of the decision-making process in conditions of uncertainty and the risk of ineffective decision-making in conditions of insufficient information about the object damaged as a result of extra-project impact of man-made nature.
- 24 December 2022
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 3-4(99-100,p. 79-86
Open AccessDEVELOPMENT OF BUILDING INFORMATION MODELS OF THE PROCESS OF REMOTE SURVEYING OF EMERGENCY BUILDINGS USING UAVS
Purpose. The adoption of organizational and technological solutions for the elimination of the consequences of accidental destruction of buildings due to overtime effects due to military actions is based on the prompt receipt of information about the technical condition of the object, since the performance of priority emergency and rescue work immediately after a disaster or accident, when there is a threat to human life, requires the rapid adoption of such decisions in conditions of uncertainty regarding the prevention of secondary destruction. It is possible to minimize the duration of the decision-making process under conditions of uncertainty by optimizing the technology of obtaining information, that is, the survey process using automated remotely controlled aircraft in combination with building information modeling of the process of obtaining and processing information about the technical condition of the object. Methodology. Analysis and consideration of factors affecting the bearing capacity and organizational and technological features of the process of loss of strength of concrete and reinforced concrete building elements in case of detonation of an open charge on their surface, depending on the growth and fusion of microcracks under the influence of applied stresses for the compilation of an information model of dynamic destruction. The results. Based on the results of the analysis of the process of remote inspection of buildings damaged as a result of military operations using unmanned aerial vehicles, the authors developed a method of building information modeling of partial destruction of large-panel buildings due to extra-design influences. The stages of construction of the information model of the object are given. Findings. Based on the results of the analysis of the process of remote inspection of buildings damaged as a result of military operations using unmanned aerial vehicles, the authors developed a method of building information modeling of partial destruction of large-panel buildings due to extra-design influences. The stages of construction of the information model of the object are given. Originality. For the first time, a method of building information modeling of partial destruction of large-panel buildings due to extra-project influences has been developed to optimize organizational and technological solutions for strengthening structures in the centers of such destruction for the possibility of emergency rescue operations. Practical value. It consists in minimizing the duration of the decision-making process in conditions of uncertainty and the risk of ineffective decision-making in conditions of insufficient information about the object damaged as a result of extra-project impact of man-made nature.