Olena Murasova
Olena Murasova has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- P. E. Hryhorovskyi
SE «Research Institute of Construction Production named after V.S. Balytsky
6 shared publications - Yu. V. Kroshka
The State "Research institute of building production named V.S. Balitsky", Kyiv
4 shared publications - A. P. Hryhorovskyi
State Enterprise "Scientific Research Institute of Building Production named after V.S. Balytskyi," Kyiv
3 shared publications - O.V. Ben
The State "Research institute of building production named V.S. Balitsky", Kyiv
3 shared publications - Vladyslav Basanskyi
SE «Research Institute of Construction Production named after V.S. Balytsky
3 shared publications I.M. Umanets
Kyiv National University of Construction and Architecture, Kyiv
2 shared publications
Latest Publications
- 10 March 2026
- Published by NGO "Ukrainian Institute of Scientific Strategies"
CAMBRIDGE SCIENCE AND EDUCATION CONFERENCE
Науковий журнал для працівників науки та викладачів закладів освіти. Публікація статей, матеріалів конференцій, досліджень та методичних розробок у відкритому доступі. Scientific journal for researchers and university educators. Publication of articles, conference papers, research and methodological developments in open access.
- 10 March 2026
- Published by NGO "Ukrainian Institute of Scientific Strategies"
CAMBRIDGE SCIENCE AND EDUCATION CONFERENCE
Науковий журнал для працівників науки та викладачів закладів освіти. Публікація статей, матеріалів конференцій, досліджень та методичних розробок у відкритому доступі. Scientific journal for researchers and university educators. Publication of articles, conference papers, research and methodological developments in open access.
- Open Access
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81,p. 142-149
SELECTION OF A MECHANIZATION SCHEME FOR RESTORATION OF DAMAGED METAL GRID STRUCTURES OF THE KYIV TELEVISION TOWER
Annotation. The article presents the results of research into the selection of a mechanization scheme for the restoration of damaged lattice metal structures of the Kyiv TV Tower due to missile attack in March 2022. As a result of the inspection by the Ukrainian Institute of Steel Structures named after V.M. Shymanovsky LLC, defects were recorded in the form of damage to the elements of the base drum at the mark +56,000 (belt 4), the brace between marks +56,000 and +64,000 and the strut at mark +56,000, in the face 4-5 the strut and brace have broken, unfastened ends near belt 4, and the antivibration suspensions of the elements of the support legs "A" and "B" were also damaged. For restoration, it is planned to cut off the damaged part of the braces (element 27), spacers (element 23) in faces 4-5 and 4-3 and elements 73 and 71 between points +48,000…+64,000 and replace the belt 71-N and brace 27-N and spacer 23-N. As a result of the research, the following four schemes of mechanization of the restoration of damaged lattice metal structures of the Kyiv TV Tower were proposed: Scheme No. 1 using an electric winch with a lifting capacity of 2 tons on the roof of the existing building at a mark of +6.520 m and suspended blocks at a mark of +72.000 m; Scheme No. 2 using an electric rope hoist Podem with a lifting capacity of 5 tons at a mark of +72.000 m; Scheme No. 3 using a truck crane with a telescopic boom GROVE GMK 5220 with a lifting capacity of 220 tons; Scheme No. 4 using a tower crane KB-503A with a boom length of 35 m with a lifting capacity of 10 tons. The use of Schemes No. 1 and No. 2 is due to the impossibility of supplying the assembly elements to the assembly area with a truck crane boom, this is prevented by the lattice tubular structures of the support leg "A". Any of the schemes is characterized by rational areas of their application, however, it is necessary to take into account the technical and economic comparison of mechanization options, real possibilities and reasonable feasibility. For the installation of element 71-N in Schemes No. 3 and No. 4, Ivanenko V.O. NIIBV developed a T-1 traverse design.
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81,p. 142-149
Open AccessSELECTION OF A MECHANIZATION SCHEME FOR RESTORATION OF DAMAGED METAL GRID STRUCTURES OF THE KYIV TELEVISION TOWER
Annotation. The article presents the results of research into the selection of a mechanization scheme for the restoration of damaged lattice metal structures of the Kyiv TV Tower due to missile attack in March 2022. As a result of the inspection by the Ukrainian Institute of Steel Structures named after V.M. Shymanovsky LLC, defects were recorded in the form of damage to the elements of the base drum at the mark +56,000 (belt 4), the brace between marks +56,000 and +64,000 and the strut at mark +56,000, in the face 4-5 the strut and brace have broken, unfastened ends near belt 4, and the antivibration suspensions of the elements of the support legs "A" and "B" were also damaged. For restoration, it is planned to cut off the damaged part of the braces (element 27), spacers (element 23) in faces 4-5 and 4-3 and elements 73 and 71 between points +48,000…+64,000 and replace the belt 71-N and brace 27-N and spacer 23-N. As a result of the research, the following four schemes of mechanization of the restoration of damaged lattice metal structures of the Kyiv TV Tower were proposed: Scheme No. 1 using an electric winch with a lifting capacity of 2 tons on the roof of the existing building at a mark of +6.520 m and suspended blocks at a mark of +72.000 m; Scheme No. 2 using an electric rope hoist Podem with a lifting capacity of 5 tons at a mark of +72.000 m; Scheme No. 3 using a truck crane with a telescopic boom GROVE GMK 5220 with a lifting capacity of 220 tons; Scheme No. 4 using a tower crane KB-503A with a boom length of 35 m with a lifting capacity of 10 tons. The use of Schemes No. 1 and No. 2 is due to the impossibility of supplying the assembly elements to the assembly area with a truck crane boom, this is prevented by the lattice tubular structures of the support leg "A". Any of the schemes is characterized by rational areas of their application, however, it is necessary to take into account the technical and economic comparison of mechanization options, real possibilities and reasonable feasibility. For the installation of element 71-N in Schemes No. 3 and No. 4, Ivanenko V.O. NIIBV developed a T-1 traverse design.
- Open Access
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81
GEODESIC WORKS DURING CONSTRUCTION AND OPERATION OF BUILDING STRUCTURES AS A COMPONENT OF THE SURVEYING CONCEPT
The article is devoted to the analysis of the role of geodetic works as a direct element of the surveying concept in the life cycle management of real estate objects. Geodetic works are considered as an integral part of ensuring the accuracy, safety and efficiency of construction processes, which cont-ributes to the extension of the service life of objects and increasing their socio-economic value. Modern approaches to the performance of geodetic works at the stages of construction and operation of buil-dings and structures are considered in the context of integration into the surveying concept. It is empha-sized that geodetic support ceases to be only an auxiliary function in the construction process and turns into an integral part of the object management system throughout its entire life cycle. The main tasks performed by geodesists during the construction of structures are analyzed, in particular, the creation of a geodetic base, transferring the project to nature, executive surveying, control of installation accuracy, as well as deformation monitoring. Special attention is paid to geodetic monitoring during the operational period, which allows for timely detection of dangerous changes in the spatial position of structural elements. The article substantiates the feasibility of using modern surveying tools - 3D scanning, robotic total stations, satellite positioning systems (GNSS), unmanned aerial vehicles and geoinformation technologies (GIS) and integration with BIM modeling, which significantly expand the capabilities of engineering and geodetic control. It is pro-posed to consider a surveyor as a participant in management decisions in the field of construction, who operates with spatial data, forms analytical conclusions and provides digital management of objects. Using the example of research by SE "NIIBV", organizational and technological solutions for the use of instrumental monitoring systems in the construction and operation of buildings of various types, inclu-ding historical buildings and objects located in difficult engineering and geological conditions are sub-stantiated. The results of domestic and foreign studies on the implementation of the surveying concept are summarized, confirming its effectiveness both in increasing the reliability of structures and in opti-mizing costs, duration and legal support of construction processes. The conclusions emphasize that the integration of geodetic works into the surveying concept contributes to increased safety, reduced acci-dent risks and optimization of operating costs, which is critically important for modern construction in the context of urbanization and complex geological challenges.
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81
Open AccessGEODESIC WORKS DURING CONSTRUCTION AND OPERATION OF BUILDING STRUCTURES AS A COMPONENT OF THE SURVEYING CONCEPT
The article is devoted to the analysis of the role of geodetic works as a direct element of the surveying concept in the life cycle management of real estate objects. Geodetic works are considered as an integral part of ensuring the accuracy, safety and efficiency of construction processes, which cont-ributes to the extension of the service life of objects and increasing their socio-economic value. Modern approaches to the performance of geodetic works at the stages of construction and operation of buil-dings and structures are considered in the context of integration into the surveying concept. It is empha-sized that geodetic support ceases to be only an auxiliary function in the construction process and turns into an integral part of the object management system throughout its entire life cycle. The main tasks performed by geodesists during the construction of structures are analyzed, in particular, the creation of a geodetic base, transferring the project to nature, executive surveying, control of installation accuracy, as well as deformation monitoring. Special attention is paid to geodetic monitoring during the operational period, which allows for timely detection of dangerous changes in the spatial position of structural elements. The article substantiates the feasibility of using modern surveying tools - 3D scanning, robotic total stations, satellite positioning systems (GNSS), unmanned aerial vehicles and geoinformation technologies (GIS) and integration with BIM modeling, which significantly expand the capabilities of engineering and geodetic control. It is pro-posed to consider a surveyor as a participant in management decisions in the field of construction, who operates with spatial data, forms analytical conclusions and provides digital management of objects. Using the example of research by SE "NIIBV", organizational and technological solutions for the use of instrumental monitoring systems in the construction and operation of buildings of various types, inclu-ding historical buildings and objects located in difficult engineering and geological conditions are sub-stantiated. The results of domestic and foreign studies on the implementation of the surveying concept are summarized, confirming its effectiveness both in increasing the reliability of structures and in opti-mizing costs, duration and legal support of construction processes. The conclusions emphasize that the integration of geodetic works into the surveying concept contributes to increased safety, reduced acci-dent risks and optimization of operating costs, which is critically important for modern construction in the context of urbanization and complex geological challenges.
- Open Access
- 1 October 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 80
FEATURES OF THE OPERATION OF THE FLAGPOLE OF THE STATE FLAG OF UKRAINE AS A UNIQUE TOWER STRUCTURE
The intensive development of urban spaces in modern conditions necessitates the construction of unique structures, among which tall tower structures and constructions such as advertising pylons, flagpoles, lighting poles, structures for telecommunication equipment, lightning protection masts, and others hold a spe-cial place. The operation of such structures is associated with heightened requirements for reliability and safe-ty, as they are constantly exposed to external factors, particularly dynamic wind loads. Wind impacts cause vibrations in structures, which can lead to material fatigue, deformations, or even emergency situations. A notable and symbolic example is the 85-meter-high flagpole of the State Flag of Ukraine, located on the ter-ritory of the National Museum of the History of Ukraine in the Second World War. This necessitates the deve-lopment and implementation of innovative engineering solutions aimed at enhancing the structures’ resistan-ce to dynamic loads, optimizing their design parameters, and ensuring a long-term safe operation. The operation of such structures involves constant exposure to dynamic loads, including wind, tempera-ture, and operational factors, which are amplified by the large surface area of the flag’s fabric. These factors can cause vibrations, deformations, metal corrosion, and slope instability at the structure’s loca-tion. The article analyzes the regulatory requirements for the operational suitability of tower structures, including current documents [1–10], which regulate mechanical stability, fire safety, protection against noise, vibrations, and environmental impact, as well as energy efficiency and repair procedures. The aim of the study is to analyze the operational features of the flagpole of the State Flag of Ukraine and to develop recommendations for organizing a technical supervision system. The objectives include identifying regulatory requirements, analyzing the monitoring system, summarizing technical mainte-nance measures, and formulating recommendations to improve the operational efficiency of similar structures. The study thoroughly examines the operational regulations, which include regular inspections (daily, routine, seasonal, and extraordinary), anti-corrosion protection, monitoring of bolted and wel-ded connections, foundation and adjacent slope monitoring, and maintenance of engineering systems. Special attention is paid to the structure’s location in a landslide-prone area, which requires constant geodetic control and instrumental monitoring. The proposed recommendations aim to ensure the reliabi-lity, safety, and durability of tower structures through the implementation of modern monitoring met-hods, the use of resilient materials and technologies, and the clear organization of operational services. The research results can be applied to other tall structures, contributing to the enhancement of their ope-rational efficiency and the sustainable development of urban infrastructure. The conclusions emphasize that an effective supervision and maintenance system for the flagpole ensures the extension of its service life and the preservation of its operational suitability. The obtained results can serve as a methodological basis for the operation of other tower structures.
- 1 October 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 80
Open AccessFEATURES OF THE OPERATION OF THE FLAGPOLE OF THE STATE FLAG OF UKRAINE AS A UNIQUE TOWER STRUCTURE
The intensive development of urban spaces in modern conditions necessitates the construction of unique structures, among which tall tower structures and constructions such as advertising pylons, flagpoles, lighting poles, structures for telecommunication equipment, lightning protection masts, and others hold a spe-cial place. The operation of such structures is associated with heightened requirements for reliability and safe-ty, as they are constantly exposed to external factors, particularly dynamic wind loads. Wind impacts cause vibrations in structures, which can lead to material fatigue, deformations, or even emergency situations. A notable and symbolic example is the 85-meter-high flagpole of the State Flag of Ukraine, located on the ter-ritory of the National Museum of the History of Ukraine in the Second World War. This necessitates the deve-lopment and implementation of innovative engineering solutions aimed at enhancing the structures’ resistan-ce to dynamic loads, optimizing their design parameters, and ensuring a long-term safe operation. The operation of such structures involves constant exposure to dynamic loads, including wind, tempera-ture, and operational factors, which are amplified by the large surface area of the flag’s fabric. These factors can cause vibrations, deformations, metal corrosion, and slope instability at the structure’s loca-tion. The article analyzes the regulatory requirements for the operational suitability of tower structures, including current documents [1–10], which regulate mechanical stability, fire safety, protection against noise, vibrations, and environmental impact, as well as energy efficiency and repair procedures. The aim of the study is to analyze the operational features of the flagpole of the State Flag of Ukraine and to develop recommendations for organizing a technical supervision system. The objectives include identifying regulatory requirements, analyzing the monitoring system, summarizing technical mainte-nance measures, and formulating recommendations to improve the operational efficiency of similar structures. The study thoroughly examines the operational regulations, which include regular inspections (daily, routine, seasonal, and extraordinary), anti-corrosion protection, monitoring of bolted and wel-ded connections, foundation and adjacent slope monitoring, and maintenance of engineering systems. Special attention is paid to the structure’s location in a landslide-prone area, which requires constant geodetic control and instrumental monitoring. The proposed recommendations aim to ensure the reliabi-lity, safety, and durability of tower structures through the implementation of modern monitoring met-hods, the use of resilient materials and technologies, and the clear organization of operational services. The research results can be applied to other tall structures, contributing to the enhancement of their ope-rational efficiency and the sustainable development of urban infrastructure. The conclusions emphasize that an effective supervision and maintenance system for the flagpole ensures the extension of its service life and the preservation of its operational suitability. The obtained results can serve as a methodological basis for the operation of other tower structures.
- Open Access
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 42-47
THE NEED FOR HARMONIZATION OF NATIONAL STANDARDS OF UKRAINE WITH INTERNATIONAL REQUIREMENTS FOR MEASUREMENTS AND TOLERANCES IN CONSTRUCTION
The article explores the scientific and technical foundations for harmonizing Ukraine’s national regulatory framework in the construction sector with international ISO standards, in particular the series ISO 3443, ISO 4463, ISO 7077, ISO 7727, ISO 7976, and ISO 12491, which regulate the requirements for geometric parameters, accuracy, tolerances, measurement methods, and statistical quality control of building structures. In the context of Ukraine’s European integration processes, the paper emphasizes the need to develop and implement identical national standards (DSTU) to ensure compliance with international requirements and to facilitate integration into the European technical space. The article provides a systematic analysis of each ISO series, revealing their structural logic, functional focus, and potential to improve installation accuracy, unify modular construction elements, reduce defects caused by measurement errors, and optimize construction processes. Special attention is given to the role of harmonization in enabling the digital transformation of the industry, particularly the implementation of Building Information Modeling (BIM) technologies, the transition to coordinated modular design, and integration into a unified European regulatory and technical space. It is substantiated that harmonization is a prerequisite for the mutual recognition of measurement results and the certification of construction products in international cooperation, which will contribute to expanding Ukraine’s export potential. It has been determined that the current regulatory framework has the potential for further alignment with the provisions of ISO series 3443, 4463, 7077, 7727, 7976, and 12491, which currently complicates the international recognition of geodetic measurement results and certification of construction products. The paper highlights the role of ISO standards as an integrated system covering modular size coordination, rules for the design and assembly of structures, organization of measurement work, compliance verification, and the application of statistical methods for quality control. The need to ensure compatibility of national standards with modern digital technologies, particularly Building Information Modeling (BIM), laser scanning, and automation of geodetic processes, is highlighted. The implementation of harmonized standards will contribute to minimizing defects and costs during construction, enhancing engineering safety, promoting the development of modular construction, and creating conditions for Ukrainian construction companies to enter international markets. The article may be useful for professionals in the fields of geodesy, design, regulation, standardization, as well as for technical regulatory bodies involved in the modernization of Ukraine’s construction sector.
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 42-47
Open AccessTHE NEED FOR HARMONIZATION OF NATIONAL STANDARDS OF UKRAINE WITH INTERNATIONAL REQUIREMENTS FOR MEASUREMENTS AND TOLERANCES IN CONSTRUCTION
The article explores the scientific and technical foundations for harmonizing Ukraine’s national regulatory framework in the construction sector with international ISO standards, in particular the series ISO 3443, ISO 4463, ISO 7077, ISO 7727, ISO 7976, and ISO 12491, which regulate the requirements for geometric parameters, accuracy, tolerances, measurement methods, and statistical quality control of building structures. In the context of Ukraine’s European integration processes, the paper emphasizes the need to develop and implement identical national standards (DSTU) to ensure compliance with international requirements and to facilitate integration into the European technical space. The article provides a systematic analysis of each ISO series, revealing their structural logic, functional focus, and potential to improve installation accuracy, unify modular construction elements, reduce defects caused by measurement errors, and optimize construction processes. Special attention is given to the role of harmonization in enabling the digital transformation of the industry, particularly the implementation of Building Information Modeling (BIM) technologies, the transition to coordinated modular design, and integration into a unified European regulatory and technical space. It is substantiated that harmonization is a prerequisite for the mutual recognition of measurement results and the certification of construction products in international cooperation, which will contribute to expanding Ukraine’s export potential. It has been determined that the current regulatory framework has the potential for further alignment with the provisions of ISO series 3443, 4463, 7077, 7727, 7976, and 12491, which currently complicates the international recognition of geodetic measurement results and certification of construction products. The paper highlights the role of ISO standards as an integrated system covering modular size coordination, rules for the design and assembly of structures, organization of measurement work, compliance verification, and the application of statistical methods for quality control. The need to ensure compatibility of national standards with modern digital technologies, particularly Building Information Modeling (BIM), laser scanning, and automation of geodetic processes, is highlighted. The implementation of harmonized standards will contribute to minimizing defects and costs during construction, enhancing engineering safety, promoting the development of modular construction, and creating conditions for Ukrainian construction companies to enter international markets. The article may be useful for professionals in the fields of geodesy, design, regulation, standardization, as well as for technical regulatory bodies involved in the modernization of Ukraine’s construction sector.
- Open Access
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 3-13
ORGANIZATIONAL AND TECHNOLOGICAL ASPECTS OF OPTIMIZING THE DURATION OF WASTE MANAGEMENT PROCESSES IN CONSTRUCTION
The article investigates organizational, technical, and technological factors influencing the duration of the comprehensive process of managing construction and demolition waste, including dismantling, sorting, transportation, processing, and material reuse. Based on the analysis of the requirements of DBN A.3.1-5:2016 [1], DSTU 9258:2023 [2], and other regulatory documents, key causes of delays are identified, and solutions for their minimization are proposed. Organizational measures focus on optimizing project-technological documentation, improving logistics coordination, and establishing centralized platforms for waste flow management. Technical solutions involve selecting specialized equipment tailored to the structural schemes of facilities, using remotely controlled machines in hazardous areas, and implementing GPS monitoring for efficient transportation. Technological approaches include the application of automated sorting systems, advanced material processing methods, and digital process modeling to enhance operational efficiency. Particular emphasis is placed on integrating modern digital technologies, such as Building Information Modeling (BIM) tools and digital twin technologies, which enable dynamic process optimization, real-time monitoring, and improved decisionmaking. The study also highlights the need to update the regulatory framework to address specific challenges of waste management in emergency conditions, such as infrastructure restoration following disasters or conflicts. The findings are particularly significant for Ukraine, where large-scale infrastructure reconstruction will require effective waste management strategies. The research conclusions can be applied to improve the regulatory framework, optimize construction processes, and support the sustainable restoration of damaged infrastructure.
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 3-13
Open AccessORGANIZATIONAL AND TECHNOLOGICAL ASPECTS OF OPTIMIZING THE DURATION OF WASTE MANAGEMENT PROCESSES IN CONSTRUCTION
The article investigates organizational, technical, and technological factors influencing the duration of the comprehensive process of managing construction and demolition waste, including dismantling, sorting, transportation, processing, and material reuse. Based on the analysis of the requirements of DBN A.3.1-5:2016 [1], DSTU 9258:2023 [2], and other regulatory documents, key causes of delays are identified, and solutions for their minimization are proposed. Organizational measures focus on optimizing project-technological documentation, improving logistics coordination, and establishing centralized platforms for waste flow management. Technical solutions involve selecting specialized equipment tailored to the structural schemes of facilities, using remotely controlled machines in hazardous areas, and implementing GPS monitoring for efficient transportation. Technological approaches include the application of automated sorting systems, advanced material processing methods, and digital process modeling to enhance operational efficiency. Particular emphasis is placed on integrating modern digital technologies, such as Building Information Modeling (BIM) tools and digital twin technologies, which enable dynamic process optimization, real-time monitoring, and improved decisionmaking. The study also highlights the need to update the regulatory framework to address specific challenges of waste management in emergency conditions, such as infrastructure restoration following disasters or conflicts. The findings are particularly significant for Ukraine, where large-scale infrastructure reconstruction will require effective waste management strategies. The research conclusions can be applied to improve the regulatory framework, optimize construction processes, and support the sustainable restoration of damaged infrastructure.
- Open Access
- 26 February 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 78,p. 125-131
STUDY OF LABOR COSTS OF PLASTERING SINIAT PLATO MULTISTART PLASTER STATION KALETA 5
The increase in the volume of mechanized plastering works in Kyiv and the high labor inten- sity require a study of the labor costs of mechanized plastering with the PLATУ MultiStart gypsum mix- ture of interior walls and ceilings of a residential building using the Kaleta ATWG-5 super plastering machine. The complex process of placing plaster coatings from the PLATУ MultiStart mixture consisted of the fol- lowing operations, for which fixed points of the beginning and end of the operation were established: surface preparation: cleaning the surface from dust, dirt, cutting off mortar flows; surface priming; hanging the surface and installing beacons on the walls, protective corners on the outer corners, window and door slopes; installation and rearrangement of scaffolding; mechanized application of PLATУ MultiStart gypsum plaster with the Kaleta A-5 super plastering station on walls and ceilings with a thic- kness of 15 mm; layer leveling with a metal rule; dismantling of inventory beacons; mechanized application of PLATУ MultiStart gypsum plaster in place of lighthouses; repeated leveling of the layer with a metal rule; smoothing the surface with metal spatulas; moistening the surface with a foam gra- ter; repeated smoothing of the surface with metal spatulas; design of corners. The labor costs of the mechanized installation of PLATУ MultiStartTM gypsum wall plastering by the KALETA ATWG-5 super plastering station amounted to 52,082 man-hours. per 100 m2 of wall surface and 74,822 man-hours. per 100 m2 of the ceiling surface, including operative work, is correspondingly equal to 49.39 man-hours. and 72.13 man-hours. for the number of plasterers in the rank of 5 people. Production per plasterer per shift equals 15.33 m2 of walls/person-room. and 10.68 m2 of ceilings/per- son-room.
- 26 February 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 78,p. 125-131
Open AccessSTUDY OF LABOR COSTS OF PLASTERING SINIAT PLATO MULTISTART PLASTER STATION KALETA 5
The increase in the volume of mechanized plastering works in Kyiv and the high labor inten- sity require a study of the labor costs of mechanized plastering with the PLATУ MultiStart gypsum mix- ture of interior walls and ceilings of a residential building using the Kaleta ATWG-5 super plastering machine. The complex process of placing plaster coatings from the PLATУ MultiStart mixture consisted of the fol- lowing operations, for which fixed points of the beginning and end of the operation were established: surface preparation: cleaning the surface from dust, dirt, cutting off mortar flows; surface priming; hanging the surface and installing beacons on the walls, protective corners on the outer corners, window and door slopes; installation and rearrangement of scaffolding; mechanized application of PLATУ MultiStart gypsum plaster with the Kaleta A-5 super plastering station on walls and ceilings with a thic- kness of 15 mm; layer leveling with a metal rule; dismantling of inventory beacons; mechanized application of PLATУ MultiStart gypsum plaster in place of lighthouses; repeated leveling of the layer with a metal rule; smoothing the surface with metal spatulas; moistening the surface with a foam gra- ter; repeated smoothing of the surface with metal spatulas; design of corners. The labor costs of the mechanized installation of PLATУ MultiStartTM gypsum wall plastering by the KALETA ATWG-5 super plastering station amounted to 52,082 man-hours. per 100 m2 of wall surface and 74,822 man-hours. per 100 m2 of the ceiling surface, including operative work, is correspondingly equal to 49.39 man-hours. and 72.13 man-hours. for the number of plasterers in the rank of 5 people. Production per plasterer per shift equals 15.33 m2 of walls/person-room. and 10.68 m2 of ceilings/per- son-room.
- Open Access
- 26 February 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 78,p. 3-8
TECHNICAL REGULATION OF THE USE OF SECONDARY RAW MATERIAL FROM CONSTRUCTION WASTE
The purpose of the article is an analytical study of the results of the experimental determination of the technical characteristics of secondary materials made from fragments of concrete products and stone wall materials, and natural raw materials of a similar purpose to establish the possibility of their interchangeability and the need to improve the national regulatory framework due to the normalization of quality indicators for secondary raw materials for the production of concrete and reinforced concrete products. The results of the study of quality indicators of recycled materials from construction waste and natural materials for use as aggregates in concrete mixtures are presented, as well as the characteristics of cement concrete based on such materials. Analytical studies have established that, based on the results of comparative experimental studies of the technical characteristics of secondary materials made from fragments of concrete products and stone wall materials, and natural raw materials of a similar purpose, the researchers did not reach a unanimous conclusion on the full replacement of natural mineral aggregates in concrete with secondary raw materials of the same grain composition. Attention is focused on the fact that the experience of countries where a significant part of construction waste is processed into secondary raw materials proves the need to create regulatory documents for recycled materials. It is emphasized that there are no regulatory documents in the national regulatory base of Ukraine that would establish requirements for the quality indicators of recycled aggregates for use in concrete, which is one of the reasons for restraining the use of construction and demolition waste. Given the large number of buildings damaged or destroyed during the war, demolition waste is a mixture of different materials and fragments of different types of products, therefore, it is possible that a series of regulations for different compositions of recycled construction waste will be needed to ensure the involvement of material after recycling in construction production.
- 26 February 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 78,p. 3-8
Open AccessTECHNICAL REGULATION OF THE USE OF SECONDARY RAW MATERIAL FROM CONSTRUCTION WASTE
The purpose of the article is an analytical study of the results of the experimental determination of the technical characteristics of secondary materials made from fragments of concrete products and stone wall materials, and natural raw materials of a similar purpose to establish the possibility of their interchangeability and the need to improve the national regulatory framework due to the normalization of quality indicators for secondary raw materials for the production of concrete and reinforced concrete products. The results of the study of quality indicators of recycled materials from construction waste and natural materials for use as aggregates in concrete mixtures are presented, as well as the characteristics of cement concrete based on such materials. Analytical studies have established that, based on the results of comparative experimental studies of the technical characteristics of secondary materials made from fragments of concrete products and stone wall materials, and natural raw materials of a similar purpose, the researchers did not reach a unanimous conclusion on the full replacement of natural mineral aggregates in concrete with secondary raw materials of the same grain composition. Attention is focused on the fact that the experience of countries where a significant part of construction waste is processed into secondary raw materials proves the need to create regulatory documents for recycled materials. It is emphasized that there are no regulatory documents in the national regulatory base of Ukraine that would establish requirements for the quality indicators of recycled aggregates for use in concrete, which is one of the reasons for restraining the use of construction and demolition waste. Given the large number of buildings damaged or destroyed during the war, demolition waste is a mixture of different materials and fragments of different types of products, therefore, it is possible that a series of regulations for different compositions of recycled construction waste will be needed to ensure the involvement of material after recycling in construction production.
- Open Access
- 30 December 2024
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 77,p. 26-30
REGULATORY AND LEGAL FRAMEWORK OF MANAGEMENT CONSTRUCTION WASTE
The purpose of the article is to study the global experience of regulatory and legal regulation of construction and demolition waste management to determine measures to ensure the use of secondary raw materials from construction waste in Ukraine for the restoration of objects damaged and destroyed as a result of military actions and the construction of new buildings. The results of the study of the experience of developed countries regarding the attraction of construction and demolition waste for reuse and processing into secondary raw materials are presented. Analytical studies have established that Directive 2008/98/EC of the European Parliament and the Council provides for a target increase by 2020 of the share of non-hazardous construction waste prepared for reuse and recycling to at least 70% by weight, as well as promotion of recycling by selective removal of materials and creation of sorting systems. The direct requirements of the regulatory and legal regulation of construction waste management during the construction of facilities are outlined. In some states, direct requirements for handling construction waste have been established: in new construction, a certain percentage of products from recycled waste must be used; ban on landfills for construction waste that can be used for processing into secondary raw materials; the minimum area of buildings, during the construction of which mandatory disposal of waste is regulated; the minimum volumes of construction work are legally defined, the excess of which determines the need for builders to sort and process construction and demolition waste. The lack of specific target indicators for the collection, sorting, processing of construction and demolition waste, as well as the use of secondary raw materials obtained from them, was emphasized in the normative legal acts of Ukraine on waste management.
- 30 December 2024
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 77,p. 26-30
Open AccessREGULATORY AND LEGAL FRAMEWORK OF MANAGEMENT CONSTRUCTION WASTE
The purpose of the article is to study the global experience of regulatory and legal regulation of construction and demolition waste management to determine measures to ensure the use of secondary raw materials from construction waste in Ukraine for the restoration of objects damaged and destroyed as a result of military actions and the construction of new buildings. The results of the study of the experience of developed countries regarding the attraction of construction and demolition waste for reuse and processing into secondary raw materials are presented. Analytical studies have established that Directive 2008/98/EC of the European Parliament and the Council provides for a target increase by 2020 of the share of non-hazardous construction waste prepared for reuse and recycling to at least 70% by weight, as well as promotion of recycling by selective removal of materials and creation of sorting systems. The direct requirements of the regulatory and legal regulation of construction waste management during the construction of facilities are outlined. In some states, direct requirements for handling construction waste have been established: in new construction, a certain percentage of products from recycled waste must be used; ban on landfills for construction waste that can be used for processing into secondary raw materials; the minimum area of buildings, during the construction of which mandatory disposal of waste is regulated; the minimum volumes of construction work are legally defined, the excess of which determines the need for builders to sort and process construction and demolition waste. The lack of specific target indicators for the collection, sorting, processing of construction and demolition waste, as well as the use of secondary raw materials obtained from them, was emphasized in the normative legal acts of Ukraine on waste management.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (54) , 24-33
Recycling of construction materials in Ukraine: legislation, current state, issues, and future prospects for the market of reusing damaged structures
In today's world, the issue of waste recycling and disposal has reached a large scale. With the continuous development of major cities, construction waste constitutes a significant portion of all waste generated by global economies. Dismantling, recycling, and reusing construction materials is known as recycling, which is a widely recognized concept in developed countries. In Ukraine, where the construction sector was one of the key economic sectors even before the onset of the large-scale aggression by the Russian Federation, the issue of recycling is particularly relevant. Furthermore, since the outbreak of military actions in 2022, the volume of construction waste has significantly increased due to the large number of destroyed buildings and infrastructure facilities. This has led to additional environmental challenges, issues regarding efficient resource use, and the collection and recycling of waste. According to various estimates, up to 30% of all waste is attributed to that generated as a result of military actions. Globally, recycling construction waste is a highly profitable industry. Leading countries have established markets for companies operating in this sector. In most European countries, the level of recycling is quite high. For instance, in the Netherlands, about 90% of construction waste is reused, followed by Belgium at 87%, Denmark at 81%, the United Kingdom at 45%, Finland at 43%, and Austria at 41%. Currently, Ukraine lacks a market for the reuse of construction waste, which negatively impacts the environment and complicates the effective use of secondary materials. The aim of this research is to analyze the existing situation in the recycling sector in Ukraine, taking into account the specific challenges posed by military actions, and to develop recommendations for improving the management system for construction waste. In the context of global challenges related to climate change and sustainable development, the study of recycling construction materials in Ukraine becomes particularly significant. Developing effective technologies and implementing innovative solutions could be a key factor in restoring damaged infrastructure and reducing negative environmental impacts.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (54) , 24-33
Open AccessRecycling of construction materials in Ukraine: legislation, current state, issues, and future prospects for the market of reusing damaged structures
In today's world, the issue of waste recycling and disposal has reached a large scale. With the continuous development of major cities, construction waste constitutes a significant portion of all waste generated by global economies. Dismantling, recycling, and reusing construction materials is known as recycling, which is a widely recognized concept in developed countries. In Ukraine, where the construction sector was one of the key economic sectors even before the onset of the large-scale aggression by the Russian Federation, the issue of recycling is particularly relevant. Furthermore, since the outbreak of military actions in 2022, the volume of construction waste has significantly increased due to the large number of destroyed buildings and infrastructure facilities. This has led to additional environmental challenges, issues regarding efficient resource use, and the collection and recycling of waste. According to various estimates, up to 30% of all waste is attributed to that generated as a result of military actions. Globally, recycling construction waste is a highly profitable industry. Leading countries have established markets for companies operating in this sector. In most European countries, the level of recycling is quite high. For instance, in the Netherlands, about 90% of construction waste is reused, followed by Belgium at 87%, Denmark at 81%, the United Kingdom at 45%, Finland at 43%, and Austria at 41%. Currently, Ukraine lacks a market for the reuse of construction waste, which negatively impacts the environment and complicates the effective use of secondary materials. The aim of this research is to analyze the existing situation in the recycling sector in Ukraine, taking into account the specific challenges posed by military actions, and to develop recommendations for improving the management system for construction waste. In the context of global challenges related to climate change and sustainable development, the study of recycling construction materials in Ukraine becomes particularly significant. Developing effective technologies and implementing innovative solutions could be a key factor in restoring damaged infrastructure and reducing negative environmental impacts.