OBO.V. Ben

O.V. Ben

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


O.V. Ben has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    METHODOLOGICAL APPROACHES TO THE DEVELOPMENT OF PROJECTS FOR GEODETIC WORKS EXECUTION FOR LINEAR INFRASTRUCTURE FACILITIES USING THE EXAMPLE OF HIGH-VOLTAGE POWER TRANSMISSION LINES

    by Y.V. Kroshka, O.V. Ben

    The article considers methodological approaches to the development of projects for geodetic works execution (PGWE) for linear infrastructure facilities using the example of construction and reconstruction of high-voltage overhead power transmission lines. The relevance of the study is conditioned by the necessity of restoring and developing Ukraine’s energy infrastructure, integrating the power system into the European energy network, as well as increased requirements for the accuracy of geodetic support of construction and installation works at facilities with consequence class CC3. The current regulatory framework in the field of geodetic works, construction organization, and operation of electrical networks has been analyzed, including the requirements of regulatory acts, standards, and industry-specific SOU standards. The main features of geodetic support for high-voltage power transmission lines have been identified, including considerable route lengths, complex engineering and geological conditions, the necessity to perform works within protection zones of operating energy facilities, as well as increased requirements for safety and accuracy of geodetic measurements. The main stages of PGWE development are considered, including analysis of initial data, creation of a geodetic setting-out network, selection of measurement methods, transfer of design solutions to the terrain, geodetic control of support structure installation, and as-built surveys. The feasibility of using modern digital technologies, including GNSS observations, electronic total stations, geographic information systems, and digital terrain models in geodetic works has been substantiated. Recommendations are provided regarding the establishment of geodetic control points and the organization of interaction between geodetic and construction-installation processes. It has been established that an integrated approach to PGWE development makes it possible to ensure the required accuracy of implementing design solutions, improve the efficiency of construction and reconstruction of high-voltage power transmission lines, and ensure the reliability and safety of further operation of energy infrastructure facilities.

  • Open Access

    GEODESIC WORKS DURING CONSTRUCTION AND OPERATION OF BUILDING STRUCTURES AS A COMPONENT OF THE SURVEYING CONCEPT

    by Y.V. Kroshka, O.V. Murasova, V. V. Borodynia, A.P. Hryhorovskyi, O.V. Ben

    The article is devoted to the analysis of the role of geodetic works as a direct element of the surveying concept in the life cycle management of real estate objects. Geodetic works are considered as an integral part of ensuring the accuracy, safety and efficiency of construction processes, which cont-ributes to the extension of the service life of objects and increasing their socio-economic value. Modern approaches to the performance of geodetic works at the stages of construction and operation of buil-dings and structures are considered in the context of integration into the surveying concept. It is empha-sized that geodetic support ceases to be only an auxiliary function in the construction process and turns into an integral part of the object management system throughout its entire life cycle. The main tasks performed by geodesists during the construction of structures are analyzed, in particular, the creation of a geodetic base, transferring the project to nature, executive surveying, control of installation accuracy, as well as deformation monitoring. Special attention is paid to geodetic monitoring during the operational period, which allows for timely detection of dangerous changes in the spatial position of structural elements. The article substantiates the feasibility of using modern surveying tools - 3D scanning, robotic total stations, satellite positioning systems (GNSS), unmanned aerial vehicles and geoinformation technologies (GIS) and integration with BIM modeling, which significantly expand the capabilities of engineering and geodetic control. It is pro-posed to consider a surveyor as a participant in management decisions in the field of construction, who operates with spatial data, forms analytical conclusions and provides digital management of objects. Using the example of research by SE "NIIBV", organizational and technological solutions for the use of instrumental monitoring systems in the construction and operation of buildings of various types, inclu-ding historical buildings and objects located in difficult engineering and geological conditions are sub-stantiated. The results of domestic and foreign studies on the implementation of the surveying concept are summarized, confirming its effectiveness both in increasing the reliability of structures and in opti-mizing costs, duration and legal support of construction processes. The conclusions emphasize that the integration of geodetic works into the surveying concept contributes to increased safety, reduced acci-dent risks and optimization of operating costs, which is critically important for modern construction in the context of urbanization and complex geological challenges.

  • Open Access

    FEATURES OF THE OPERATION OF THE FLAGPOLE OF THE STATE FLAG OF UKRAINE AS A UNIQUE TOWER STRUCTURE

    by P. E. Hryhorovskyi, Y.V. Kroshka, O.V. Murasova, O.V. Ben, O. M. Kondratskyi

    The intensive development of urban spaces in modern conditions necessitates the construction of unique structures, among which tall tower structures and constructions such as advertising pylons, flagpoles, lighting poles, structures for telecommunication equipment, lightning protection masts, and others hold a spe-cial place. The operation of such structures is associated with heightened requirements for reliability and safe-ty, as they are constantly exposed to external factors, particularly dynamic wind loads. Wind impacts cause vibrations in structures, which can lead to material fatigue, deformations, or even emergency situations. A notable and symbolic example is the 85-meter-high flagpole of the State Flag of Ukraine, located on the ter-ritory of the National Museum of the History of Ukraine in the Second World War. This necessitates the deve-lopment and implementation of innovative engineering solutions aimed at enhancing the structures’ resistan-ce to dynamic loads, optimizing their design parameters, and ensuring a long-term safe operation. The operation of such structures involves constant exposure to dynamic loads, including wind, tempera-ture, and operational factors, which are amplified by the large surface area of the flag’s fabric. These factors can cause vibrations, deformations, metal corrosion, and slope instability at the structure’s loca-tion. The article analyzes the regulatory requirements for the operational suitability of tower structures, including current documents [1–10], which regulate mechanical stability, fire safety, protection against noise, vibrations, and environmental impact, as well as energy efficiency and repair procedures. The aim of the study is to analyze the operational features of the flagpole of the State Flag of Ukraine and to develop recommendations for organizing a technical supervision system. The objectives include identifying regulatory requirements, analyzing the monitoring system, summarizing technical mainte-nance measures, and formulating recommendations to improve the operational efficiency of similar structures. The study thoroughly examines the operational regulations, which include regular inspections (daily, routine, seasonal, and extraordinary), anti-corrosion protection, monitoring of bolted and wel-ded connections, foundation and adjacent slope monitoring, and maintenance of engineering systems. Special attention is paid to the structure’s location in a landslide-prone area, which requires constant geodetic control and instrumental monitoring. The proposed recommendations aim to ensure the reliabi-lity, safety, and durability of tower structures through the implementation of modern monitoring met-hods, the use of resilient materials and technologies, and the clear organization of operational services. The research results can be applied to other tall structures, contributing to the enhancement of their ope-rational efficiency and the sustainable development of urban infrastructure. The conclusions emphasize that an effective supervision and maintenance system for the flagpole ensures the extension of its service life and the preservation of its operational suitability. The obtained results can serve as a methodological basis for the operation of other tower structures.

  • Open Access

    THE NEED FOR HARMONIZATION OF NATIONAL STANDARDS OF UKRAINE WITH INTERNATIONAL REQUIREMENTS FOR MEASUREMENTS AND TOLERANCES IN CONSTRUCTION

    by Y.V. Kroshka, O.V. Murasova, A.P. Hryhorovskyi, O.V. Ben

    The article explores the scientific and technical foundations for harmonizing Ukraine’s national regulatory framework in the construction sector with international ISO standards, in particular the series ISO 3443, ISO 4463, ISO 7077, ISO 7727, ISO 7976, and ISO 12491, which regulate the requirements for geometric parameters, accuracy, tolerances, measurement methods, and statistical quality control of building structures. In the context of Ukraine’s European integration processes, the paper emphasizes the need to develop and implement identical national standards (DSTU) to ensure compliance with international requirements and to facilitate integration into the European technical space. The article provides a systematic analysis of each ISO series, revealing their structural logic, functional focus, and potential to improve installation accuracy, unify modular construction elements, reduce defects caused by measurement errors, and optimize construction processes. Special attention is given to the role of harmonization in enabling the digital transformation of the industry, particularly the implementation of Building Information Modeling (BIM) technologies, the transition to coordinated modular design, and integration into a unified European regulatory and technical space. It is substantiated that harmonization is a prerequisite for the mutual recognition of measurement results and the certification of construction products in international cooperation, which will contribute to expanding Ukraine’s export potential. It has been determined that the current regulatory framework has the potential for further alignment with the provisions of ISO series 3443, 4463, 7077, 7727, 7976, and 12491, which currently complicates the international recognition of geodetic measurement results and certification of construction products. The paper highlights the role of ISO standards as an integrated system covering modular size coordination, rules for the design and assembly of structures, organization of measurement work, compliance verification, and the application of statistical methods for quality control. The need to ensure compatibility of national standards with modern digital technologies, particularly Building Information Modeling (BIM), laser scanning, and automation of geodetic processes, is highlighted. The implementation of harmonized standards will contribute to minimizing defects and costs during construction, enhancing engineering safety, promoting the development of modular construction, and creating conditions for Ukrainian construction companies to enter international markets. The article may be useful for professionals in the fields of geodesy, design, regulation, standardization, as well as for technical regulatory bodies involved in the modernization of Ukraine’s construction sector.

  • Open Access

    Models and methods for assessing spatial parameters of investment projects and urban reconstruction programs

    by O. Вielienkova, O Koval, M Bozhynskyi, I Scherbak, O Ben

    Modern processes of reconstruction of Ukrainian cities are taking place in conditions of significant socio-economic transformations caused by the consequences of war destruction, moral and physical deterioration of urban infrastructure, as well as the need to ensure balanced spatial development. In this regard, it is urgent to improve models and methods for assessing spatial parameters of investment projects and urban reconstruction programs that cover various types of objects - residential, public, industrial, religious buildings and structures. Existing methodological approaches are mostly focused on financial and economic assessment, while spatial, environmental, social and energy-efficient aspects remain fragmentarily taken into account or presented as auxiliary criteria. The need to improve such models lies in the transition from purely economic analysis to a comprehensive spatial and functional assessment based on the principles of sustainable development and digital transformation. A promising direction is the integration of information modeling (BIM, CIM) with geographic information technologies (GIS), which allows combining technical and economic indicators of investment projects with the parameters of the spatial organization of urban areas. Such digital models will contribute to a more accurate determination of the effectiveness of reconstruction measures, optimization of the use of territories, assessment of the impact of projects on social infrastructure and the environment. Further development of the evaluation methodology should include the use of multi-criteria decision-making methods (AHP, TOPSIS, SMART), methods of estimating the cost during the life cycle of buildings (LCC - Life Cycle Costing), as well as approaches to assessing energy efficiency, thermal modernization and cost management in the dynamics of the life cycle of the facility. It is also important to develop an integrated system of indicators that takes into account investment attractiveness, the level of social efficiency, spatial balance and compliance with strategic plans for the development of the city. Thus, improving models and methods for assessing spatial parameters of urban reconstruction investment projects creates the basis for improving the quality of management decisions, effective resource allocation, and the formation of a scientifically sound policy for the restoration and modernization of the urban environment based on the principles of sustainable development, digitalization, and energy efficiency.