Mykola Naumov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mykola Naumov has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Dmytro Radchuk
Dnipro University of Technology
3 shared publications - Serhii Cheberiachko
Національний технічний університет «Дніпровська політехніка
3 shared publications - Bohdan Kravchenko
Dnipro University of Technology
2 shared publications - Oleg Deryugin
Dnipro University of Technology
2 shared publications National Technical University "Dnipro Polytechnic"
1 shared publicationO. Deryuhin
Dnipro University of Technology, Dnipro
1 shared publication
Latest Publications
- Open Access
- 30 December 2024
- Published by Publishing House Helvetica (Publications) in Електротехнічні та інформаційні системи
- No. 106,p. 100-109
РОЗРОБКА СКОМБІНОВАНОГО ФІЛЬТРУ З ІНДИКАЦІЄЮ ЗАКІНЧЕННЯ СТРОКУ СЛУЖБИ ДЛЯ ПРОТИГАЗУ
Мета полягає в удосконаленні конструкції скомбінованих фільтрів для протигазу з індикацією закінчення часу захисної дії. Методи. Визначення часу захисної дії виконувалось стандартним методом оцінювання поглинальної здатності фільтрів згідно з ДСТУ EN 14387:2021. Як тестові гази використовували аміак та сірководень. Тестування фільтрів проводилось етапами по 10 хвилин за раз, загальний час випробування фільтру додавався до загального значення. Визначення проникання газу через фільтр проводилось комбінованим способом з використанням газоаналізаторів та нюху випробувачів-експертів. Результати. Проведено аналіз літературних джерел щодо вимог із застосування систем попередження користувачів фільтрів про закінчення часу захисної дії. Встановлено, що найбільш прийнятним методом є використання індикаторів. Удосконалено конструкцію скомбінованого фільтра за допомогою розміщення в передостанньому шарі активованого вугілля по центру руху повітряного потоку розчинної хлоридно-натрієвої капсули з ароматичною речовиною. Визначено, що час захисної дії скомбінованих фільтрів із хлоридно-натрієвою капсулою з ароматичною речовиною відрізняється до 20% від розрахункового, що дозволить зберегти здоров’я користувача завдяки ранній діагностиці закінчення адсорбційної ємності фільтра. Побудовано графіки залежності часу захисної дії скомбінованих фільтрів від концентрації шкідливої речовини в повітрі, які отримані теоретичним шляхом та апроксимацією даних згідно з отриманими експериментальними результатами. Розроблено рекомендації для користувачів фільтрів щодо зменшення ризиків отруєння шкідливими речовинами та підвищення ефективності використання засобів індивідуального захисту органів дихання. Новизна полягає у визначенні адсорбційного ресурсу скомбінованого фільтру через руйнацію структури хлоридно-натрієвої оболонки капсули, яка містить ароматичні вуглеводи. Цінність полягає у визначенні терміну захисної дії скомбінованих фільтрів завдяки появі різкого безпечного запаху в підмасковому просторі через попередню руйнацію хлоридно-натрієвої оболонки капсули, яка розташована в конструкції фільтра.
- 30 December 2024
- Published by Publishing House Helvetica (Publications) in Електротехнічні та інформаційні системи
- No. 106,p. 100-109
Open AccessРОЗРОБКА СКОМБІНОВАНОГО ФІЛЬТРУ З ІНДИКАЦІЄЮ ЗАКІНЧЕННЯ СТРОКУ СЛУЖБИ ДЛЯ ПРОТИГАЗУ
Мета полягає в удосконаленні конструкції скомбінованих фільтрів для протигазу з індикацією закінчення часу захисної дії. Методи. Визначення часу захисної дії виконувалось стандартним методом оцінювання поглинальної здатності фільтрів згідно з ДСТУ EN 14387:2021. Як тестові гази використовували аміак та сірководень. Тестування фільтрів проводилось етапами по 10 хвилин за раз, загальний час випробування фільтру додавався до загального значення. Визначення проникання газу через фільтр проводилось комбінованим способом з використанням газоаналізаторів та нюху випробувачів-експертів. Результати. Проведено аналіз літературних джерел щодо вимог із застосування систем попередження користувачів фільтрів про закінчення часу захисної дії. Встановлено, що найбільш прийнятним методом є використання індикаторів. Удосконалено конструкцію скомбінованого фільтра за допомогою розміщення в передостанньому шарі активованого вугілля по центру руху повітряного потоку розчинної хлоридно-натрієвої капсули з ароматичною речовиною. Визначено, що час захисної дії скомбінованих фільтрів із хлоридно-натрієвою капсулою з ароматичною речовиною відрізняється до 20% від розрахункового, що дозволить зберегти здоров’я користувача завдяки ранній діагностиці закінчення адсорбційної ємності фільтра. Побудовано графіки залежності часу захисної дії скомбінованих фільтрів від концентрації шкідливої речовини в повітрі, які отримані теоретичним шляхом та апроксимацією даних згідно з отриманими експериментальними результатами. Розроблено рекомендації для користувачів фільтрів щодо зменшення ризиків отруєння шкідливими речовинами та підвищення ефективності використання засобів індивідуального захисту органів дихання. Новизна полягає у визначенні адсорбційного ресурсу скомбінованого фільтру через руйнацію структури хлоридно-натрієвої оболонки капсули, яка містить ароматичні вуглеводи. Цінність полягає у визначенні терміну захисної дії скомбінованих фільтрів завдяки появі різкого безпечного запаху в підмасковому просторі через попередню руйнацію хлоридно-натрієвої оболонки капсули, яка розташована в конструкції фільтра.
- Open Access
- 27 June 2024
- Published by SHEI Pryazovskyi State Technical University in Reporter of the Priazovskyi State Technical University. Section: Technical sciences
- No. 48,p. 142-157
Improvement of the model for calculating the protection coefficient of filtering respirators from harmful aerosol
Research objective. Improvement of the model for calculating the protection coefficient of filtering respirators from harmful solid aerosol. Materials and methods. For the experimental determination of the protection coefficient of the filtering respirator according to the standard DSTU EN 149:2017 «Personal respiratory protective devices. Filtering half masks to protect against aerosols. Requirements, testing, marking» and the application of the method DSTU EN 13274-1:2005 «Personal respiratory protective devices. Methods of testing. Part 1. Determination of the penetration coefficient and the overall penetration coefficient», lightweight filtering half masks of «Standard» FFP2 type were used on volunteers. Results. The protection coefficient of the filtering respirators used on volunteers in laboratory conditions was calculated at the specified concentration of test aerosol in the ambient air by the standard testing method described in DSTU EN 13274-1:2005 «Personal respiratory protective devices. Methods of testing. Part 1. Determination of the penetration coefficient and the overall penetration coefficient» and takes into account the measurement error from the instruments not exceeding 10%. A comparison of the obtained indicators of the protection coefficient of filtering respirators in laboratory conditions and with the developed theoretical model, taking into account particle deposition in the sampling probe and submask space during the exhalation process, showed a good agreement of the indicators by the Student's t-test criterion. Scientific novelty. The scientific novelty lies in the development of a model for calculating the protection coefficient of filtering respirators based on the assessed mass distribution function of aerosol particles in the breathing zone; penetration function through the gap between the face and the half mask, taking into account the inhalation and exhalation process, as well as particle deposition in the sampling probe. Practical significance of the work lies in the development of a formula for the theoretical determination of the protection coefficient of filtering respirators, which is used to calculate the professional risk of pneumoconiosis among users
- 27 June 2024
- Published by SHEI Pryazovskyi State Technical University in Reporter of the Priazovskyi State Technical University. Section: Technical sciences
- No. 48,p. 142-157
Open AccessImprovement of the model for calculating the protection coefficient of filtering respirators from harmful aerosol
Research objective. Improvement of the model for calculating the protection coefficient of filtering respirators from harmful solid aerosol. Materials and methods. For the experimental determination of the protection coefficient of the filtering respirator according to the standard DSTU EN 149:2017 «Personal respiratory protective devices. Filtering half masks to protect against aerosols. Requirements, testing, marking» and the application of the method DSTU EN 13274-1:2005 «Personal respiratory protective devices. Methods of testing. Part 1. Determination of the penetration coefficient and the overall penetration coefficient», lightweight filtering half masks of «Standard» FFP2 type were used on volunteers. Results. The protection coefficient of the filtering respirators used on volunteers in laboratory conditions was calculated at the specified concentration of test aerosol in the ambient air by the standard testing method described in DSTU EN 13274-1:2005 «Personal respiratory protective devices. Methods of testing. Part 1. Determination of the penetration coefficient and the overall penetration coefficient» and takes into account the measurement error from the instruments not exceeding 10%. A comparison of the obtained indicators of the protection coefficient of filtering respirators in laboratory conditions and with the developed theoretical model, taking into account particle deposition in the sampling probe and submask space during the exhalation process, showed a good agreement of the indicators by the Student's t-test criterion. Scientific novelty. The scientific novelty lies in the development of a model for calculating the protection coefficient of filtering respirators based on the assessed mass distribution function of aerosol particles in the breathing zone; penetration function through the gap between the face and the half mask, taking into account the inhalation and exhalation process, as well as particle deposition in the sampling probe. Practical significance of the work lies in the development of a formula for the theoretical determination of the protection coefficient of filtering respirators, which is used to calculate the professional risk of pneumoconiosis among users
- 1 January 2024
- Published by National University of Civil Protection of Ukraine in Emergency Situations: Prevention and Liquidation
- Vol. 8 (2)
EVALUATION OF OPERATIONAL RISKS OF RESPIRATORY PROTECTIVE EQUIPMENT
For assessing the risks of hazardous events at gas stations, the "HAZOP" and "FMEA" methods were chosen because they complement each other well and allow for detailed analysis of each stage of the production process to identify hazards and assess the overall system's operability.An analysis of nonconformities during the operation of respirators was conducted based on the requirements of Commission Communiqué 89/C 328/02 (Official Journal of the European Communities No. C 328). A method for evaluating operational risks of respiratory protective equipment (RPE) was developed, consisting of four steps: identifying nonconformities or defects, determining the magnitude of operational risk, assessing the risk priority number, and justifying preventive measures. It was proposed to use the "HAZOP" method for identifying nonconformities or defects, which allows qualitatively identifying the relationship between nonconformity, hazardous events, and the consequences regarding the loss of RPE protective effectiveness through the use of keywords. The "FMEA" method was proposed for evaluating the magnitude of operational risk, as it allows for identifying nonconformities or defects during RPE operation. The scientific novelty lies in establishing operational risk through the risk priority number, which is determined considering the identification of nonconformities or defects during the operation of respiratory protective equipment. The practical value lies in developing a new approach for evaluating operational risks using a combination of the "HAZOP" and "FMEA" methods, which improves the accuracy of the assessment and provides more detailed recommendations to prevent the loss of protective effectiveness of respiratory protective equipment during operation.Keywords:Risk assessment, RPE, "HAZOP" method, "FMEA" method, hazardous event, operational risk magnitude, risk priority number magnitude.
- 1 January 2024
- Published by National University of Civil Protection of Ukraine in Emergency Situations: Prevention and Liquidation
- Vol. 8 (2)
EVALUATION OF OPERATIONAL RISKS OF RESPIRATORY PROTECTIVE EQUIPMENT
For assessing the risks of hazardous events at gas stations, the "HAZOP" and "FMEA" methods were chosen because they complement each other well and allow for detailed analysis of each stage of the production process to identify hazards and assess the overall system's operability.An analysis of nonconformities during the operation of respirators was conducted based on the requirements of Commission Communiqué 89/C 328/02 (Official Journal of the European Communities No. C 328). A method for evaluating operational risks of respiratory protective equipment (RPE) was developed, consisting of four steps: identifying nonconformities or defects, determining the magnitude of operational risk, assessing the risk priority number, and justifying preventive measures. It was proposed to use the "HAZOP" method for identifying nonconformities or defects, which allows qualitatively identifying the relationship between nonconformity, hazardous events, and the consequences regarding the loss of RPE protective effectiveness through the use of keywords. The "FMEA" method was proposed for evaluating the magnitude of operational risk, as it allows for identifying nonconformities or defects during RPE operation. The scientific novelty lies in establishing operational risk through the risk priority number, which is determined considering the identification of nonconformities or defects during the operation of respiratory protective equipment. The practical value lies in developing a new approach for evaluating operational risks using a combination of the "HAZOP" and "FMEA" methods, which improves the accuracy of the assessment and provides more detailed recommendations to prevent the loss of protective effectiveness of respiratory protective equipment during operation.Keywords:Risk assessment, RPE, "HAZOP" method, "FMEA" method, hazardous event, operational risk magnitude, risk priority number magnitude.
- 25 February 2021
- Published by Taylor & Francis in International Journal of Occupational Safety and Ergonomics
- Vol. 28 (2) , 1145-1159
Development of an algorithm for effective design of respirator half-masks and encapsulated particle filters
Introduction: The social and economic situation in modern world requires new approaches to the development of respiratory protective equipment. Objective: Improve the process of 3D modeling of respirator half-masks and encapsulated particle filters to them. Methods: The basic provisions of the theory of non-stationary filtration and hydroaerodynamics; the Nelder-Mead method; the linear interpolation equation. Results: The peculiarity of the algorithm is the adjustment stage of the design process aimed at efficiency check for half-mask. The surface of the half mask was constructed according to the coordinates of the 3D model of a worker's head. Conclusion: For the first time the regularities of algorithm for design of the half-mask surface of dust respirators were defined based on the data of three-dimensional coordinates of key points of anthropometric parameters of the workers' faces. The pressure difference on the encapsulated particle filters of dust respirators is determined by the particle filter’s resistance coefficient and the air flow through them, the diameters ratio of their outlets and inlets. Relevance to industry: The algorithm developed provides the product verification at the design stage using criteria evaluation of the parameters of the polygonal model of the head; preliminary calculation of the protection factor; checking the tightness of the prototype.
- 25 February 2021
- Published by Taylor & Francis in International Journal of Occupational Safety and Ergonomics
- Vol. 28 (2) , 1145-1159
Development of an algorithm for effective design of respirator half-masks and encapsulated particle filters
Introduction: The social and economic situation in modern world requires new approaches to the development of respiratory protective equipment. Objective: Improve the process of 3D modeling of respirator half-masks and encapsulated particle filters to them. Methods: The basic provisions of the theory of non-stationary filtration and hydroaerodynamics; the Nelder-Mead method; the linear interpolation equation. Results: The peculiarity of the algorithm is the adjustment stage of the design process aimed at efficiency check for half-mask. The surface of the half mask was constructed according to the coordinates of the 3D model of a worker's head. Conclusion: For the first time the regularities of algorithm for design of the half-mask surface of dust respirators were defined based on the data of three-dimensional coordinates of key points of anthropometric parameters of the workers' faces. The pressure difference on the encapsulated particle filters of dust respirators is determined by the particle filter’s resistance coefficient and the air flow through them, the diameters ratio of their outlets and inlets. Relevance to industry: The algorithm developed provides the product verification at the design stage using criteria evaluation of the parameters of the polygonal model of the head; preliminary calculation of the protection factor; checking the tightness of the prototype.