ZAZeynep Aytaç

Zeynep Aytaç

*This is an algorithmically generated author record based on publicly available information.

Zeynep Aytaç has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical investigation of in-cylinder swirl motion under cold start conditions in a diesel engine

    by Fatih Aktaş, Zeynep Aytaç, Nuri Yücel

    The performance and efficiency of internal combustion engines, particularly diesel engines, are closely tied to the quality of air-fuel mixing and combustion processes. One of the critical factors influencing these processes is the in-cylinder airflow, specifically the swirl motion, which is the rotational movement of air around the cylinder axis. This swirl plays a pivotal role in enhancing the turbulence required for efficient fuel-air mixing, accelerating flame development, and improving overall combustion. This study shows a numerical analysis of the swirl movement within the cylinder of a diesel engine under cold starting conditions. Using computational fluid dynamics (CFD) analysis, the research evaluates the effects of various valve opening configurations on swirl intensity. The results indicate that increasing valve openings generally enhances swirl motion, improving combustion efficiency by promoting better air-fuel mixing. However, excessive swirl can negatively impact performance due to increased heat transfer and potential flame propagation issues. The study also assesses the impact of turbulence models and mesh density on the accuracy of the results, with the k-ε model providing predictions closest to experimental data. These findings contribute to optimizing engine design for improved combustion characteristics and reduced emissions.


  • Manyetik Alan Altinda Nanoakişkanlarin Akiş Karakteristiklerinin İncelenmesi

    by Zeynep Aytaç

    The existence/application of an externally induced magnetic field, like in satellite cooling applications, causes a decrement in heat transfer when used with nanofluids. This study investigates the flow characteristics and velocity profile of distilled water, alumina nanofluid, and cobalt ferrite ferrofluid in a horizontal cylindrical heat pipe flowing in a laminar regime and being exposed to an external magnetic field. All of the simulations were performed with ANSYS Fluent MHD module, for a concentration of 2%, Reynolds number of 10, and Hartmann numbers of 25, 50, and 150. The velocity profiles, pressure drops, and flow characteristics are examined by varying the magnetic field intensity while keeping all other parameters constant. It is concluded that an external magnetic field causes a deterioration in the velocity profiles of the nanofluid, especially in cobalt ferrite, while it does not have a significant effect on water. When the magnitude of the magnetic field is increased by 2 times, it is seen that the velocity of the fluid decreases by 6% and increasing the magnetic field from 0 to 50 Tesla causes a deceleration rate of 9%, which leads to the conclusion that application of a magnetic field for the first time has a more significant slowing effect when comparing it to increasing the magnetic field. In addition, when a magnetic field of 50 Tesla is considered, the maximum velocity of alumina is lower than that of water by 5.10%, and the maximum velocity of cobalt ferrite is lower by 28.57%.

  • MEME VE KARACİĞER DOKULARINDA TEK VE ÇİFT YUVALI ANTEN KULLANILARAK YAPILAN MİKRODALGA KANSER TEDAVİSİNİN NÜMERİK ANALİZİ

    by Aykut Eren, Zeynep Aytaç, Oğuz Turgut, Burak Tiğli

    Mikrodalga tedavisi, meme ve karaciğer kanseri gibi hastalıklarda, kanserli hücreleri yok etmek için cerrahi müdahale ihtiyacını ortadan kaldırabilen etkili bir yöntemdir. Mevcut çalışma, malign hücrelerin daha geniş bir çevrede, daha kısa sürede yakılırken çevre dokulara en az hasara sebep olmayı amaçlayan bir metodoloji sunmaı hedeflemektedir. Bu çalışma, 2.45 GHz frekans ve 10 W güç değeri kullanılarak sonlu eleman metoduyla gerçekleştirilmiştir. Meme ve karaciğer dokularında, eş eksenli tek yuvalı ve çift yuvalı antenler için bir kıyaslama sunulmuştur. Araştırılan parametreler yuva sayısı, doku tipi ve mikrodalga kanser tedavisinin süresi iken sonuçta incelenen parametreler özgül soğrulma oranı ve sıcaklık dağılımıdır. Çalışmanın sonucunda, hem en yüksek özgül soğrulma oranı hem de en yüksek sıcaklık değeri, karaciğerde tek yuvalı antenle elde edilmiştir ve elde edilen sıcaklık dağılımının zamana bağlı olduğu görülmüştür. Karaciğerde elde edilen en yüksek sıcaklık değeri, tek yuvalı antende 93.9oC ve çift yuvalı antende 82.8 oC olmuştur. Aynı değerler meme dokusunda, tek yuvalı antende 93.0 oC ve çift yuvalı antende 69.8 oC olarak kaydedilmiştir. Tek yuvalı anten için, karaciğer ve meme dokularının tedavisinde kullanılmak üzere yeni korelasyonlar sunulmuştur. Yapılan çalışmanın, tıp alanında katkı sağlaması beklenmektedir.


  • h-BN/DCM ve SiO2/DCM Nanoakışkanlarının Başınç Düşümlerinin İncelenmesi

    by Zeynep Aytaç

    The present study is about the investigation of the flow characteristics and pressure heads of h-BN & DCM and SiO2 & DCM nanofluids at various pipe diameters by using numerical methods. The pipe diameters are 0.0127 m, 0.0254 m, 0.0381 m, 0.0508 m, 0.0762 m. Dichloromethane (DCM) was used as base fluid in nanofluid preparation. Hexagonal boron nitride and silica were mixed into the base fluid by 1% when obtaining the nanofluids. Although nanofluids have been located in the center of many thermal and thermodynamic analyses, the scientific research about the energy losses caused by their increased viscosity compared to the base fluids have remained insufficient. This study investigates the pressure losses of several nanofluids and their behaviors in a pipe. It was found out that the highest increment in pressure drop was in SiO2-DCM which has the largest viscosity of 0.00056 kg/ms and the smallest increment in pressure drop is in DCM which has the lowest viscosity with 0.000413 kg/ms for a constant pipe diameter.

  • Utilization of CFD for the Aerodynamic Analysis of a Subsonic Rocket

    by Zeynep Aytaç, Fatih Aktaş

    Nowadays, every single country aims to have a domestic and national defense industry. In accordance with this purpose, the design of missile structures has become more important than ever. In this study, the design and analyses of a subsonic rocket was carried out with the utilization of Computational Fluid Dynamics (CFD) tools. Also, the effects of several critical parameters; i.e. Mach number, turbulence intensity, turbulence model, on the rocket performance were investigated. It was found out that a variation in Mach number has a substantial effect on the drag coefficient; i.e. an increment in Mach number at approximately 30% results in an increment of drag coefficient nearly 68%. Contrarily, changing the turbulence intensity does not make any significant difference on drag coefficient. Although the appropriate turbulence intensity should be used for every unique problem, in this case, this parameter is not a critical variable to ponder upon. Finally, the implementation of the appropriate turbulence model is critical in the design process as expected. Utilization of k-ω and k-ω SST models differs approximately 12% in terms of drag coefficient; the drag coefficient obtained from k-ω is higher than that of obtained from k-ω SST.


  • Development of a Design Methodology for a Centrifugal Compressor with the Utilization of CFD

    by Zeynep Aytaç, Nuri Yücel

    Centrifugal compressors are widely used for several purposes in many industries. Aero defense industry uses these compressors in the engines of several structures. In the present study, the centrifugal compressor of a mini jet engine is designed with the utilization of Computational Fluid Dynamics (CFD) tools with the methodology developed. The designed compressor is manufactured and its tests were conducted using an engine that is being utilized commercially. The performance parameters of the designed compressor and the results obtained from the engine were compared and presented. The specifications of the designed compressor was determined in the light of the requirements of the test engine. It was observed that the obtained mass flow rate (0.678 kg/s), pressure ratio (4.6135) and the efficiency (92.38%) values are within the limits of the design specifications and the although there is a slight difference between the results of the CFD analyses and the experiments, the trends of the curves are consistent with each other.