ZZZhongtao Zhu

Zhongtao Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhongtao Zhu has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • AlGaN/GaN core–shell nanofin diodes on Si substrates for vertical GaN electronics

    by Juncheng Xiong, Matt D. Brubaker, Kris A. Bertness, J. Andrew McArthur, Eric Rappeport, Zhongtao Zhu, Wesley Turner, Weifeng Wu, Pengcheng Xu, Yu-En Jeng, et al.

    We demonstrate plasma-assisted MBE selective-area growth (SAG) of GaN/AlGaN core–shell structures on Si(111) as a path to vertical GaN devices. The SAG enables the full vertical and uniform core–shell fin structures to be realized in a continuous growth without breaking vacuum. TEM images and energy dispersive spectroscopy mapping of the core–shell structures show well-aligned crystal structures and sharp heterointerfaces. Dislocation filtering was observed in STEM imaging of the fin structure. p–n junction diodes fabricated with GaN/AlGaN core–shell structures reveal ideality factors as low as 1.5, and the reverse-bias leakage is consistent with trap-assisted space-charge-limited conduction. While practical challenges exist, including material-related leakage, growth-related challenges, and optimization, this demonstration of the p–n junction by this method may provide a path to vertical superjunction device concepts in GaN and related materials.

  • Experimental Characterization of Impact Ionization and Projection of Critical Electric Fields in High‐Al Content AlGaN

    by Zhongtao Zhu, Pramod Reddy, Yashas Satapathy, Lina Cao, Juncheng Xiong, Mateo Gutierrez, Yu‐En Jeng, Yu Duan, Wesley Turner, Anthony J. Hoffman, et al.

  • Open Access

    Experimental characterization and theoretical analysis of K- to V-band GaN Hi-Lo IMPATT diodes

    by Zhongtao Zhu, Lina Cao, Juncheng Xiong, Wesley Turner, Yu Duan, Jinqiao Xie, Patrick Fay

    We report the experimental characterization and theoretical analysis of high-frequency GaN IMPATT diodes featuring a Hi-Lo doping profile. On-wafer small-signal measurements of reflection gain over frequency and temperature confirm IMPATT operation covering Ka through V bands. Temperature-dependent reverse I–V measurements also confirmed avalanche breakdown as the dominant breakdown mechanism. Under a pulse bias of −175 V and current density of 7.6 kA/cm2, the fabricated IMPATT diode exhibited gain between 19.3 and 50.1 GHz, with peak gain of 1.97 dB at ∼30.8 GHz. Temperature dependent characterization revealed that while the bias voltage required for operation at a given frequency changes significantly with temperature, consistent and stable performance can be achieved using a current source for biasing. For a fixed current density, both the avalanche frequency and device impedance remained relatively stable over a broad ambient temperature range. For use as a free-running oscillator, the minimum required Q for the external resonator was found to be less than 3.6, which is well within the range of what can be achieved in practice at these frequencies. Theoretical predictions of avalanche frequency were conducted and showed good agreement with the measured avalanche frequency, facilitating precise design of oscillators for applications. The fabricated IMPATT diodes demonstrate significant potential for high-power and high-efficiency signal generation from K-band to V-band across a wide temperature range.

  • Open Access

    Temperature-Dependent RF Characterization of GaN-Based K-Band to V-Band IMPATT Diodes

    by Zhongtao Zhu, Lina Cao, Juncheng Xiong, Yu Duan, Wesley Turner, Yu-En Jeng, Jinqiao Xie, Patrick Fay

    High-gain GaN impact-ionization avalanche transit-time (IMPATT) diodes have been fabricated and experimentally characterized. The devices feature a “Hi-Lo” doping profile design; temperature-dependent reverse $I$ – $V$ measurement verified impact ionization avalanche as the dominant breakdown mechanism. IMPATT operation was confirmed, with reflection gain observed between 19.3 and 50.1 GHz using pulsed bias conditions of −175 V and current density of 7.6 kA/cm2. Apeak reflection gain of 1.97 dB was observed around 30.8 GHz. On-wafer S-parameter measurements revealed a large negative differential resistance (NDR) of $- 992~\Omega $ , comparable to state-of-the-art Si IMPATT diodes. The RF output power density is projected to be 40.3 kW/cm2 at 35 GHz. The short-pulse on-wafer S-parameter-based measurement technique used here facilitates direct extraction of device impedance, providing insights into the optimal impedance matching of the peripheral resonant circuit and the appropriate operating frequency. Temperature-dependent characterization shows that the avalanche frequency has a much stronger dependence on current density rather than bias voltage. Therefore, biasing with a current source is preferred compared to a voltage source for stable operation in applications. The maximum operating frequency is found to increase at higher temperatures, possibly due to a decrease in the series resistance associated with the anode’s p-contact resistance. These devices are promising for high-power, high-efficiency K-band to V-band signal generation across a broad temperature range.


  • Open Access

    Experimental Characterization of Impact Ionization and Projection of Critical Electric Fields in High‐Al Content AlGaN

    by Zhongtao Zhu, Pramod Reddy, Yashas Satapathy, Lina Cao, Juncheng Xiong, Mateo Gutierrez, Yu‐En Jeng, Yu Duan, Wesley Turner, Anthony J. Hoffman, et al.

    Electron and hole impact ionization coefficients are obtained from measurements of high‐Al content Al x Ga 1‐ x N p–n diodes grown on AlN substrates. The photomultiplication method using a 193 nm pulsed laser is applied to measure the multiplication factor. The impact ionization coefficients are modeled using Chynoweth's formulation, based on electric field profiles determined from the solution of Poisson's equation. A least‐squares fit of the theoretical multiplication factor to the measured multiplication factor yields the impact ionization coefficients and the extracted electron impact ionization coefficients are consistent with previous numerical predictions. Furthermore, the theoretical breakdown voltage and critical electric field are computed based on the extracted impact ionization coefficients. These results provide much‐needed data to further optimize the design of optoelectronic, power switching, and high‐power RF devices based on ultrawide bandgap AlGaN.


  • Open Access

    Direct observation of radio-frequency negative differential resistance in GaN-based single drift region IMPATT diodes

    by Zhongtao Zhu, Lina Cao, Adam Jönsson, Pengcheng Xu, Jinqiao Xie, Patrick Fay

    We report the direct observation of radio-frequency negative differential resistance, via on-wafer S-parameter measurements, in GaN-based impact ionization avalanche transit time (IMPATT) diodes. Clear signatures of reflection gain are observed from 18.7 to 30.6 GHz. These observations have been made possible by suppressing the reverse leakage current (and thereby parasitic shunt conductance) by optimization of the fabrication process, in conjunction with the use of pulsed measurements to suppress device self-heating. Consistent with avalanche-dominated behavior, the measured DC reverse bias current–voltage measurements show a positive temperature coefficient of breakdown. For the high-frequency on-wafer characterization, pulsed-bias S-parameter measurements with low (0.0067%) duty cycle were used to mitigate thermal effects. The measured avalanche frequency aligns closely with theoretical predictions based on Gilden and Hines' small signal model [Gilden and Hines, IEEE Trans. Electron Devices ED-13(1), 169–175 (1966)], measured impact ionization coefficients [Cao et al., Appl. Phys. Lett. 112(26), 262103 (2018)], and experimental saturation velocity measurements [Bajaj et al., Appl. Phys. Lett. 107(15), 153504 (2015)]; this excellent agreement confirms IMPATT operation and provides insights needed to further optimize device performance.


  • Open Access

    Ion-implanted triple-zone graded junction termination extension for vertical GaN p-n diodes

    by Yu Duan, Jingshan Wang, Zhongtao Zhu, Guanxi Piao, Kazutada Ikenaga, Hiroki Tokunaga, Shuuichi Koseki, Mayank Bulsara, Patrick Fay

    We demonstrate an ion-implanted triple-zone junction termination extension (JTE) for vertical GaN p-n diodes. Due to the spatial distribution of fixed charge in the triple-zone JTE structure, the peak electric fields at the contact metal edge and at the edge of the JTE are significantly reduced compared to conventional approaches. The forward and reverse characteristics of diodes with conventional single-zone JTE and the triple-zone JTE explored here have been studied and compared experimentally. GaN p-n diodes fabricated using the triple-zone JTE obtain an experimentally measured maximum breakdown voltage of 1.27 kV, appreciably higher than the 1.01 kV achieved using the single-zone JTE structure. The triple-zone JTE design also provides a wider window for fabrication processing and epitaxial wafer growth to achieve the high breakdown voltage compared to single-zone designs. The triple-zone JTE is promising for cost-effective fabrication of GaN power electronics.