WTWesley Turner

Wesley Turner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wesley Turner has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • AlGaN/GaN core–shell nanofin diodes on Si substrates for vertical GaN electronics

    by Juncheng Xiong, Matt D. Brubaker, Kris A. Bertness, J. Andrew McArthur, Eric Rappeport, Zhongtao Zhu, Wesley Turner, Weifeng Wu, Pengcheng Xu, Yu-En Jeng, et al.

    We demonstrate plasma-assisted MBE selective-area growth (SAG) of GaN/AlGaN core–shell structures on Si(111) as a path to vertical GaN devices. The SAG enables the full vertical and uniform core–shell fin structures to be realized in a continuous growth without breaking vacuum. TEM images and energy dispersive spectroscopy mapping of the core–shell structures show well-aligned crystal structures and sharp heterointerfaces. Dislocation filtering was observed in STEM imaging of the fin structure. p–n junction diodes fabricated with GaN/AlGaN core–shell structures reveal ideality factors as low as 1.5, and the reverse-bias leakage is consistent with trap-assisted space-charge-limited conduction. While practical challenges exist, including material-related leakage, growth-related challenges, and optimization, this demonstration of the p–n junction by this method may provide a path to vertical superjunction device concepts in GaN and related materials.

  • Open Access

    Experimental characterization and theoretical analysis of K- to V-band GaN Hi-Lo IMPATT diodes

    by Zhongtao Zhu, Lina Cao, Juncheng Xiong, Wesley Turner, Yu Duan, Jinqiao Xie, Patrick Fay

    We report the experimental characterization and theoretical analysis of high-frequency GaN IMPATT diodes featuring a Hi-Lo doping profile. On-wafer small-signal measurements of reflection gain over frequency and temperature confirm IMPATT operation covering Ka through V bands. Temperature-dependent reverse I–V measurements also confirmed avalanche breakdown as the dominant breakdown mechanism. Under a pulse bias of −175 V and current density of 7.6 kA/cm2, the fabricated IMPATT diode exhibited gain between 19.3 and 50.1 GHz, with peak gain of 1.97 dB at ∼30.8 GHz. Temperature dependent characterization revealed that while the bias voltage required for operation at a given frequency changes significantly with temperature, consistent and stable performance can be achieved using a current source for biasing. For a fixed current density, both the avalanche frequency and device impedance remained relatively stable over a broad ambient temperature range. For use as a free-running oscillator, the minimum required Q for the external resonator was found to be less than 3.6, which is well within the range of what can be achieved in practice at these frequencies. Theoretical predictions of avalanche frequency were conducted and showed good agreement with the measured avalanche frequency, facilitating precise design of oscillators for applications. The fabricated IMPATT diodes demonstrate significant potential for high-power and high-efficiency signal generation from K-band to V-band across a wide temperature range.

  • Open Access

    Temperature-Dependent RF Characterization of GaN-Based K-Band to V-Band IMPATT Diodes

    by Zhongtao Zhu, Lina Cao, Juncheng Xiong, Yu Duan, Wesley Turner, Yu-En Jeng, Jinqiao Xie, Patrick Fay

    High-gain GaN impact-ionization avalanche transit-time (IMPATT) diodes have been fabricated and experimentally characterized. The devices feature a “Hi-Lo” doping profile design; temperature-dependent reverse $I$ – $V$ measurement verified impact ionization avalanche as the dominant breakdown mechanism. IMPATT operation was confirmed, with reflection gain observed between 19.3 and 50.1 GHz using pulsed bias conditions of −175 V and current density of 7.6 kA/cm2. Apeak reflection gain of 1.97 dB was observed around 30.8 GHz. On-wafer S-parameter measurements revealed a large negative differential resistance (NDR) of $- 992~\Omega $ , comparable to state-of-the-art Si IMPATT diodes. The RF output power density is projected to be 40.3 kW/cm2 at 35 GHz. The short-pulse on-wafer S-parameter-based measurement technique used here facilitates direct extraction of device impedance, providing insights into the optimal impedance matching of the peripheral resonant circuit and the appropriate operating frequency. Temperature-dependent characterization shows that the avalanche frequency has a much stronger dependence on current density rather than bias voltage. Therefore, biasing with a current source is preferred compared to a voltage source for stable operation in applications. The maximum operating frequency is found to increase at higher temperatures, possibly due to a decrease in the series resistance associated with the anode’s p-contact resistance. These devices are promising for high-power, high-efficiency K-band to V-band signal generation across a broad temperature range.