Juncheng Xiong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juncheng Xiong has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Patrick Fay
University of Notre Dame
5 shared publications - Wesley Turner
University of Notre Dame
4 shared publications - Zhongtao Zhu
Department of Electrical Engineering University of Notre Dame Notre Dame IN 46556 USA
4 shared publications - Pengcheng Xu
University of Notre Dame
3 shared publications - Weifeng Wu
Department of Electrical Engineering, University of Notre Dame, Notre Dame, IN, USA
3 shared publications Jinqiao Xie
Qorvo 3 , 500 W. Renner Rd., Richardson, Texas 75080
2 shared publications
Latest Publications
- 13 July 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (2)
AlGaN/GaN core–shell nanofin diodes on Si substrates for vertical GaN electronics
We demonstrate plasma-assisted MBE selective-area growth (SAG) of GaN/AlGaN core–shell structures on Si(111) as a path to vertical GaN devices. The SAG enables the full vertical and uniform core–shell fin structures to be realized in a continuous growth without breaking vacuum. TEM images and energy dispersive spectroscopy mapping of the core–shell structures show well-aligned crystal structures and sharp heterointerfaces. Dislocation filtering was observed in STEM imaging of the fin structure. p–n junction diodes fabricated with GaN/AlGaN core–shell structures reveal ideality factors as low as 1.5, and the reverse-bias leakage is consistent with trap-assisted space-charge-limited conduction. While practical challenges exist, including material-related leakage, growth-related challenges, and optimization, this demonstration of the p–n junction by this method may provide a path to vertical superjunction device concepts in GaN and related materials.
- 13 July 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (2)
AlGaN/GaN core–shell nanofin diodes on Si substrates for vertical GaN electronics
We demonstrate plasma-assisted MBE selective-area growth (SAG) of GaN/AlGaN core–shell structures on Si(111) as a path to vertical GaN devices. The SAG enables the full vertical and uniform core–shell fin structures to be realized in a continuous growth without breaking vacuum. TEM images and energy dispersive spectroscopy mapping of the core–shell structures show well-aligned crystal structures and sharp heterointerfaces. Dislocation filtering was observed in STEM imaging of the fin structure. p–n junction diodes fabricated with GaN/AlGaN core–shell structures reveal ideality factors as low as 1.5, and the reverse-bias leakage is consistent with trap-assisted space-charge-limited conduction. While practical challenges exist, including material-related leakage, growth-related challenges, and optimization, this demonstration of the p–n junction by this method may provide a path to vertical superjunction device concepts in GaN and related materials.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. PP (21563950) , 1
Low-loss D-band Power Divider using SiC-based SIWs
The design, fabrication, and characterization of novel D-band power dividers in both Y- and T-junction configurations, using substrate integrated waveguide (SIW) technology fabricated on a 100-μm thick 4H-SiC substrates, are reported. The three-port S-parameters of the fabricated dividers were measured and calibrated on-wafer, achieving an excess loss as low as 0.68 ± 0.10 dB and an average return loss of up to 25 dB across full D-band. This is, to the best of our knowledge, the first demonstration of a SiC-based SIW power divider at D-band, offering excellent performance and compatibility with GaN-on-SiC MMIC fabrication processes.
- 9 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. PP (21563950) , 1
Low-loss D-band Power Divider using SiC-based SIWs
The design, fabrication, and characterization of novel D-band power dividers in both Y- and T-junction configurations, using substrate integrated waveguide (SIW) technology fabricated on a 100-μm thick 4H-SiC substrates, are reported. The three-port S-parameters of the fabricated dividers were measured and calibrated on-wafer, achieving an excess loss as low as 0.68 ± 0.10 dB and an average return loss of up to 25 dB across full D-band. This is, to the best of our knowledge, the first demonstration of a SiC-based SIW power divider at D-band, offering excellent performance and compatibility with GaN-on-SiC MMIC fabrication processes.
- Open Access
- 4 November 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (4)
Experimental characterization and theoretical analysis of K- to V-band GaN Hi-Lo IMPATT diodes
We report the experimental characterization and theoretical analysis of high-frequency GaN IMPATT diodes featuring a Hi-Lo doping profile. On-wafer small-signal measurements of reflection gain over frequency and temperature confirm IMPATT operation covering Ka through V bands. Temperature-dependent reverse I–V measurements also confirmed avalanche breakdown as the dominant breakdown mechanism. Under a pulse bias of −175 V and current density of 7.6 kA/cm2, the fabricated IMPATT diode exhibited gain between 19.3 and 50.1 GHz, with peak gain of 1.97 dB at ∼30.8 GHz. Temperature dependent characterization revealed that while the bias voltage required for operation at a given frequency changes significantly with temperature, consistent and stable performance can be achieved using a current source for biasing. For a fixed current density, both the avalanche frequency and device impedance remained relatively stable over a broad ambient temperature range. For use as a free-running oscillator, the minimum required Q for the external resonator was found to be less than 3.6, which is well within the range of what can be achieved in practice at these frequencies. Theoretical predictions of avalanche frequency were conducted and showed good agreement with the measured avalanche frequency, facilitating precise design of oscillators for applications. The fabricated IMPATT diodes demonstrate significant potential for high-power and high-efficiency signal generation from K-band to V-band across a wide temperature range.
- 4 November 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (4)
Open AccessExperimental characterization and theoretical analysis of K- to V-band GaN Hi-Lo IMPATT diodes
We report the experimental characterization and theoretical analysis of high-frequency GaN IMPATT diodes featuring a Hi-Lo doping profile. On-wafer small-signal measurements of reflection gain over frequency and temperature confirm IMPATT operation covering Ka through V bands. Temperature-dependent reverse I–V measurements also confirmed avalanche breakdown as the dominant breakdown mechanism. Under a pulse bias of −175 V and current density of 7.6 kA/cm2, the fabricated IMPATT diode exhibited gain between 19.3 and 50.1 GHz, with peak gain of 1.97 dB at ∼30.8 GHz. Temperature dependent characterization revealed that while the bias voltage required for operation at a given frequency changes significantly with temperature, consistent and stable performance can be achieved using a current source for biasing. For a fixed current density, both the avalanche frequency and device impedance remained relatively stable over a broad ambient temperature range. For use as a free-running oscillator, the minimum required Q for the external resonator was found to be less than 3.6, which is well within the range of what can be achieved in practice at these frequencies. Theoretical predictions of avalanche frequency were conducted and showed good agreement with the measured avalanche frequency, facilitating precise design of oscillators for applications. The fabricated IMPATT diodes demonstrate significant potential for high-power and high-efficiency signal generation from K-band to V-band across a wide temperature range.
- Open Access
- 7 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (1) , 34-41
Temperature-Dependent RF Characterization of GaN-Based K-Band to V-Band IMPATT Diodes
High-gain GaN impact-ionization avalanche transit-time (IMPATT) diodes have been fabricated and experimentally characterized. The devices feature a “Hi-Lo” doping profile design; temperature-dependent reverse $I$ – $V$ measurement verified impact ionization avalanche as the dominant breakdown mechanism. IMPATT operation was confirmed, with reflection gain observed between 19.3 and 50.1 GHz using pulsed bias conditions of −175 V and current density of 7.6 kA/cm2. Apeak reflection gain of 1.97 dB was observed around 30.8 GHz. On-wafer S-parameter measurements revealed a large negative differential resistance (NDR) of $- 992~\Omega $ , comparable to state-of-the-art Si IMPATT diodes. The RF output power density is projected to be 40.3 kW/cm2 at 35 GHz. The short-pulse on-wafer S-parameter-based measurement technique used here facilitates direct extraction of device impedance, providing insights into the optimal impedance matching of the peripheral resonant circuit and the appropriate operating frequency. Temperature-dependent characterization shows that the avalanche frequency has a much stronger dependence on current density rather than bias voltage. Therefore, biasing with a current source is preferred compared to a voltage source for stable operation in applications. The maximum operating frequency is found to increase at higher temperatures, possibly due to a decrease in the series resistance associated with the anode’s p-contact resistance. These devices are promising for high-power, high-efficiency K-band to V-band signal generation across a broad temperature range.
- 7 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (1) , 34-41
Open AccessTemperature-Dependent RF Characterization of GaN-Based K-Band to V-Band IMPATT Diodes
High-gain GaN impact-ionization avalanche transit-time (IMPATT) diodes have been fabricated and experimentally characterized. The devices feature a “Hi-Lo” doping profile design; temperature-dependent reverse $I$ – $V$ measurement verified impact ionization avalanche as the dominant breakdown mechanism. IMPATT operation was confirmed, with reflection gain observed between 19.3 and 50.1 GHz using pulsed bias conditions of −175 V and current density of 7.6 kA/cm2. Apeak reflection gain of 1.97 dB was observed around 30.8 GHz. On-wafer S-parameter measurements revealed a large negative differential resistance (NDR) of $- 992~\Omega $ , comparable to state-of-the-art Si IMPATT diodes. The RF output power density is projected to be 40.3 kW/cm2 at 35 GHz. The short-pulse on-wafer S-parameter-based measurement technique used here facilitates direct extraction of device impedance, providing insights into the optimal impedance matching of the peripheral resonant circuit and the appropriate operating frequency. Temperature-dependent characterization shows that the avalanche frequency has a much stronger dependence on current density rather than bias voltage. Therefore, biasing with a current source is preferred compared to a voltage source for stable operation in applications. The maximum operating frequency is found to increase at higher temperatures, possibly due to a decrease in the series resistance associated with the anode’s p-contact resistance. These devices are promising for high-power, high-efficiency K-band to V-band signal generation across a broad temperature range.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (9) , 5097-5103
Optimization of Specific On-Resistance for Superjunction With Insulating Pillar Including Temperature Dependence
Unified temperature-dependent models are developed to optimize ${R} {_{\text {sp}}}$ for the insulating pillar superjunction (IP-SJ) MOSFETs. The insulating pillar (i-pillar) could be intrinsic silicon in the compensated pillar SJ (CP-SJ) structure, oxide in the oxide pillar SJ (OP-SJ) structure, or even air in the air pillar SJ (AP-SJ) structure. These three typical structures are investigated and compared. Extensive investigations reveal that CP-SJ exhibits no improvement ${R} {_{\text {sp}}}$ compared with the conventional SJ (C-SJ) structure. The AP-SJ (with the lowest relative dielectric constant of unity) possesses the best ${R} {_{\text {sp}}}$ , especially with high BV and narrow half cell width b, and large drain-to-source voltage ( ${V} {_{\text {DS}}}$ ), due to better suppression of JFET effect. For BV ${=}1250$ V and ${b}{=}0.6~{\mu }$ m, theoretical optimization predicts a largest reduction up to 20.5% in ${R} {_{\text {sp}}}$ with ${V} {_{\text {DS}} =}5$ V for the AP-SJ at room temperature. The effects of temperature (T) on the optimization results and the temperature-dependent application are also investigated.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (9) , 5097-5103
Optimization of Specific On-Resistance for Superjunction With Insulating Pillar Including Temperature Dependence
Unified temperature-dependent models are developed to optimize ${R} {_{\text {sp}}}$ for the insulating pillar superjunction (IP-SJ) MOSFETs. The insulating pillar (i-pillar) could be intrinsic silicon in the compensated pillar SJ (CP-SJ) structure, oxide in the oxide pillar SJ (OP-SJ) structure, or even air in the air pillar SJ (AP-SJ) structure. These three typical structures are investigated and compared. Extensive investigations reveal that CP-SJ exhibits no improvement ${R} {_{\text {sp}}}$ compared with the conventional SJ (C-SJ) structure. The AP-SJ (with the lowest relative dielectric constant of unity) possesses the best ${R} {_{\text {sp}}}$ , especially with high BV and narrow half cell width b, and large drain-to-source voltage ( ${V} {_{\text {DS}}}$ ), due to better suppression of JFET effect. For BV ${=}1250$ V and ${b}{=}0.6~{\mu }$ m, theoretical optimization predicts a largest reduction up to 20.5% in ${R} {_{\text {sp}}}$ with ${V} {_{\text {DS}} =}5$ V for the AP-SJ at room temperature. The effects of temperature (T) on the optimization results and the temperature-dependent application are also investigated.
- Open Access
- 1 January 2020
- Published by Wiley in Evidence-Based Complementary and Alternative Medicine
- Vol. 2020 (1) , 5180716
Network Pharmacology‐Based Analysis of the Pharmacological Mechanisms of Aloperine on Cardiovascular Disease
Background. Aloperine is an active component of Sophora alopecuroides Linn, which has been extensively applied for the treatment of cardiovascular disease (CVD). However, our current understanding of the molecular mechanisms supporting the effects of aloperine on CVD remains unclear. Methods. Systematic network pharmacology was conducted to provide testable hypotheses about pharmacological mechanisms of the protective effects of aloperine against CVD. Detailed structure was obtained from Traditional Chinese Medicines Integrated Database (TCMID). Target genes of aloperine against CVD were collected from SwissTargetPrediction, DrugBank database, and Online Mendelian Inheritance in Man (OMIM) database. Gene Ontology (GO) enrichment analysis, Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway performance, and network construction were adopted to explore common target genes. Results. Our findings showed that 25 candidate targets were the interacting genes between aloperine and CVD. GO analysis revealed biological process, cellular component, and molecular function of these target genes. More importantly, the majority of enrichment pathways was found to be highly associated with the nitrogen metabolism by KEGG analysis. Core genes particularly in nitrogen metabolism pathway including carbonic anhydrase (CA) III, CA IV, CA VA, CA VB, CA VI, CA VII, CA IX, CA XII, and CA XIV can be modulated by aloperine in the nitrogen metabolism. Conclusion. Our work revealed the pharmacological and molecular mechanisms of aloperine against CVD and provided a feasible tool to identify the pharmacological mechanisms of single active ingredient of traditional Chinese medicines.
- 1 January 2020
- Published by Wiley in Evidence-Based Complementary and Alternative Medicine
- Vol. 2020 (1) , 5180716
Open AccessNetwork Pharmacology‐Based Analysis of the Pharmacological Mechanisms of Aloperine on Cardiovascular Disease
Background. Aloperine is an active component of Sophora alopecuroides Linn, which has been extensively applied for the treatment of cardiovascular disease (CVD). However, our current understanding of the molecular mechanisms supporting the effects of aloperine on CVD remains unclear. Methods. Systematic network pharmacology was conducted to provide testable hypotheses about pharmacological mechanisms of the protective effects of aloperine against CVD. Detailed structure was obtained from Traditional Chinese Medicines Integrated Database (TCMID). Target genes of aloperine against CVD were collected from SwissTargetPrediction, DrugBank database, and Online Mendelian Inheritance in Man (OMIM) database. Gene Ontology (GO) enrichment analysis, Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway performance, and network construction were adopted to explore common target genes. Results. Our findings showed that 25 candidate targets were the interacting genes between aloperine and CVD. GO analysis revealed biological process, cellular component, and molecular function of these target genes. More importantly, the majority of enrichment pathways was found to be highly associated with the nitrogen metabolism by KEGG analysis. Core genes particularly in nitrogen metabolism pathway including carbonic anhydrase (CA) III, CA IV, CA VA, CA VB, CA VI, CA VII, CA IX, CA XII, and CA XIV can be modulated by aloperine in the nitrogen metabolism. Conclusion. Our work revealed the pharmacological and molecular mechanisms of aloperine against CVD and provided a feasible tool to identify the pharmacological mechanisms of single active ingredient of traditional Chinese medicines.