S. Ajitha Priyadarsini
Research Subjects
S. Ajitha Priyadarsini has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- D. Rajeev
Department of Mechanical Engineering, Mar Ephraem College of Engineering and Technology, Tamilnadu, India
1 shared publication - Kannan Pauliah Nadar
Department of Electrical and Computer Engineering, Institute of Technology, Jigjiga University, Jijiga, Ethiopia
1 shared publication - Rajakumar S. Rai
Department of Mechanical Engineering, Karunya Institute of Technology and Sciences, Coimbatore, India
1 shared publication - Sreedharan Christopher Ezhil Singh
Department of Mechanical Engineering, Vimal Jyothi Engineering College, Kannur, Kerala, India
1 shared publication
Latest Publications
- Open Access
- 1 January 2023
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2023 (1)
Artificial Neural Network on Tool Condition Monitoring in Hard Turning of AISI4140 Steel Using Carbide Tool
Hard turning has replaced conventional grinding in production processes in recent years as an emerging technique. Nowadays, coated carbide tools are replacing expensive CBN inserts in turning. Wear is a significant concern when turning with coated carbide; it immediately affects the acceptability of the machined surface, which causes machine downtime and loss due to wastage in machined parts. Online tool condition monitoring (TCM) is required to prevent such critical conditions. Hard turning differs from conventional turning in energy balance during metal cutting, resulting in greater thrust force; hence, the TCM model presented for conventional turning may not be suitable for hard turning. Hence, tool wear prediction for turning is projected based on thrust force using an artificial neural network (ANN). All of the tests were done using a design of experiments called full factorial design (FFD). The specimens were made of AISI 4140 steel that had been hardened to 47 HRC, and the inserts were made of coated carbide. The most impactful input features for wear, selected based on experimental outputs, were given to the neural network and trained. Tool wear is an estimated output from the training set that has been validated with satisfactory results for random conditions. The 5–10–1 network structure with the Levenberg–Marquardt (LM) learning algorithm, R2 values of 0.996602 and 0.969437 for the training and testing data, and mean square error values of 0.000133152 and 0.004443 for the training and testing data, respectively, gave the best results. The MEP values of 0.575407 and 2.977617 are very low (5%). The LM learning algorithm‐based ANN is good at predicting tool wear based on how well it predicts tool wear for both the testing set and the training set.
- 1 January 2023
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2023 (1)
Open AccessArtificial Neural Network on Tool Condition Monitoring in Hard Turning of AISI4140 Steel Using Carbide Tool
Hard turning has replaced conventional grinding in production processes in recent years as an emerging technique. Nowadays, coated carbide tools are replacing expensive CBN inserts in turning. Wear is a significant concern when turning with coated carbide; it immediately affects the acceptability of the machined surface, which causes machine downtime and loss due to wastage in machined parts. Online tool condition monitoring (TCM) is required to prevent such critical conditions. Hard turning differs from conventional turning in energy balance during metal cutting, resulting in greater thrust force; hence, the TCM model presented for conventional turning may not be suitable for hard turning. Hence, tool wear prediction for turning is projected based on thrust force using an artificial neural network (ANN). All of the tests were done using a design of experiments called full factorial design (FFD). The specimens were made of AISI 4140 steel that had been hardened to 47 HRC, and the inserts were made of coated carbide. The most impactful input features for wear, selected based on experimental outputs, were given to the neural network and trained. Tool wear is an estimated output from the training set that has been validated with satisfactory results for random conditions. The 5–10–1 network structure with the Levenberg–Marquardt (LM) learning algorithm, R2 values of 0.996602 and 0.969437 for the training and testing data, and mean square error values of 0.000133152 and 0.004443 for the training and testing data, respectively, gave the best results. The MEP values of 0.575407 and 2.977617 are very low (5%). The LM learning algorithm‐based ANN is good at predicting tool wear based on how well it predicts tool wear for both the testing set and the training set.