QWQin Wang

Qin Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qin Wang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimized Control for ISOP LLC-DAB Converter to Achieve Full-Power-Range Zero-Voltage Switching and Fast Dynamic Response

    by Qunfang Wu, Wanxiang Liu, Wenlong Chen, Bo Hu, Qin Wang, Dezhi Li

    In recent years, the input-series-output-parallel (ISOP) LLC-DAB converter has been applied to DC microgrids and energy routers. However, the existing control methods still have some limitations, such as a limited range of soft switching, large current stress, and slow dynamic response speed, which restrict the efficiency and dynamic performance of the converter. This paper optimizes the Triple-Phase-Shift (TPS) modulation scheme to achieve full-range soft-switching operation across varying input voltages, while simultaneously optimizing current stress characteristics and improving the converter's efficiency. Meanwhile, a more concise closed-loop control strategy is developed. Then, a direct power control (DPC) strategy based on inductor current stress optimization is presented. This strategy calculates the phase-shift ratio parameters according to the converter's required power transmission. The calculation ensures the transmitted power quickly matches the load power. The approach improves the converter's dynamic performance during input voltage and load variations. The improvement is achieved while maintaining optimized current stress conditions. Finally, the effectiveness of the proposed control strategy is verified by experimental results of a 2.5kW prototype.

  • The Decoupling Magnetic Integration Method and Global Loss Optimization for LLC -DAB Hybrid Converter With Circuit State Correlation

    by Menghan Jiang, Qunfang Wu, Xiaodong Yang, Qin Wang, Lan Xiao, Zhifeng Sun

    The LLC-DAB quasi-parallel hybrid converter (LDHC) exhibits both excellent efficiency and voltage regulation capability. However, a large number of transformer units and bulky magnetic components result in low power density and low efficiency. The existing integration methods for magnetic components in such hybrid converters rely on the decoupling of the common magnetic circuit and introduce an additional magnetic core structure. This paper presents an integration method for LDHC transformers that eliminates the common magnetic circuit and derives the design boundaries for the magnetic core under decoupling conditions. The correlation model between the structure of DAB magnetic components and circuit states was established, and the optimization of the magnetic component structure, considering volume and global loss, was realized using the particle swarm optimization (PSO) algorithm. Finally, two 750V/48V@2.5kW prototypes were built, and experiments demonstrated that the proposed method improved peak efficiency by 1.24%. The power density of the integrated magnetic core reached 690W/in3, which was 16.97% higher than that of the discrete integrated prototype.

  • A Soft-Switching Hybrid Control Strategy Based on DPWM for SiC Asynchronous Parallel Three-Phase Inverters

    by Xin Zhang, Xiao Lan, Qunfang Wu, Qin Wang, Yuyao Zheng, Teng Xie

    Aviation converters impose stringent requirements for high-frequency and high-efficiency operation on three-phase inverters. However, SiC-based three-phase inverters still experience significant switching losses at high switching frequencies, which limits further improvements in both switching frequency and system efficiency. To address these challenges, this paper proposes a zero-voltage switching (ZVS) hybrid control strategy for SiC asynchronous parallel three-phase inverters. The proposed strategy integrates discontinuous pulse width modulation (DPWM), quadrilateral current mode (QCM), and clamping mode, in which the clamping interval is optimally configured within each fundamental cycle to ensure ZVS of the power devices throughout the entire cycle. This approach effectively reduces current stress and conduction losses under heavy-load conditions and thus enhances system efficiency. For cases with load power factors less than unity, the DPWM strategy dynamically adjusts the position of the clamping interval by compensating the zero-sequence voltage component so that the interval aligns with the peak phase current, thereby further optimizing system loss distribution. Additionally, a transition interval is introduced during the changeover between clamping and QCM intervals to further mitigate current stress. The operation principle of the proposed hybrid control is systematically analyzed, including the amplitude and optimization of current stress in QCM mode and the relationship between the power factor and the zero-sequence component. Finally, a 6 kVA, 200 kHz SiC inverter prototype was developed to validate the proposed strategy. Experimental results demonstrate that the proposed scheme achieves an efficiency of 98.6% at full load, thereby confirming the effectiveness and engineering feasibility of the proposed control method.

  • A Self-Driven Energy Recovery Snubber for a Single-Switch Resonant Pulsed Power Converter

    by Qunfang Wu, Baitang Hou, Qin Wang, Fei Gao

    Single-switch resonant pulsed power converters provide advantages for applications like ozone generation, due to the inherent defects of the topology, the stress of the switch exists, the leakage inductance energy of the transformer cannot be released, and the switching loss is high. It is necessary to rely on the snubber to achieve highly reliable operation. There are significant power losses in traditional diode-resistor (DR) snubbers, especially at high loads. This paper proposes a self-driven energy recovery snubber to overcome this limitation. The solution replaces the lossy resistor with a flyback circuit comprising a clamping capacitor, inductor, switch, and diode. A hysteresis controller, powered by and directly responding to the snubber capacitor voltage, autonomously regulates the snubber’s switch. This self-driven approach eliminates external control, synchronization, or auxiliary supplies. Key features include: (1) Recycling of dissipated snubber energy back to the input source; (2) Down-frequency operation in discontinuous conduction mode (DCM), minimizing switching losses, and (3) Inherent simplicity and reliability from decoupled operation. The paper details the working principle across operational stages and provides practical design guidelines. Compared with the DR snubber, the experimental verification of the prototype shows that the power loss recovery and efficiency improvement are effective. The core concept offers a viable approach for enhancing efficiency in resonant pulsed-power converters and is readily adaptable for replacing the widely used RC/RCD snubbers.

  • A Current Sharing Strategy With Model Predictive Control for Multiphase Parallel LLC -Buck Converters

    by Qunfang Wu, Yifan Zhao, Sen Xue, Qin Wang, Lan Xiao

    Input-series-output-parallel (ISOP) LLC-Buck converters are widely used in energy storage systems for their high efficiency and wide voltage gain range. However, parameter mismatches among parallel modules often cause power imbalance and degraded current sharing. This article proposes a model predictive control (MPC) based current sharing strategy for multiphase LLC-Buck converters. A current-sharing error model is established to analyze the impact of mismatched parameters, including resonant components, magnetizing inductance, switch characteristics, and Buck inductor resistance. Based on this, a fixed-frequency, single-step MPC algorithm is developed, incorporating real-time reference updates and an observer to correct model deviations. Compared with the widely used average current control, the proposed method enhances dynamic response, robustness, and current balance. A 500 W two-phase LLC-Buck prototype (48 V to 3.2 V) is built, and both simulation and experimental results validate the approach, achieving current sharing errors of 0.84% at half-load and 0.27% at full-load.


  • Multimode Rectifiers With Ultra-Wide Voltage Gain Based on Adjustable Turns Ratio Transformer and Voltage Doubling Structures

    by Qunfang Wu, Hailiang Shen, Qin Wang, Lan Xiao, Wenjie Zhao

    For applications such as plug-in electric vehicle battery charging, isolated dc–dc converters are required to accommodate a wide output voltage range. However, existing isolated dc–dc converters exhibit limited voltage gain range and suffer from a drastic efficiency drop under wide voltage range regulation. This article presents a family of rectifier structures utilizing adjustable turns ratio transformers combined with voltage doubling structures, and summarizes the topological deduction laws. The rectifier structure can operate in different gain modes by adjusting the states of secondary switches to expand voltage gain range. Combining LLC converter with one of the proposed rectifiers to obtain a novel resonant converter, which has a wider voltage range compared to existing solutions. The converter can operate in five different voltage gain modes, and the switching frequency of each mode is near the resonant frequency, which helps improve efficiency and soft switching performance. A 2.5 A rated prototype that converts 390 V input to 60–780 V output is designed and tested to validate the solution. The designed prototype demonstrates a peak efficiency of 97.1%.

  • An Online Condition Monitoring Method for Gate-Oxide Degradation and Junction Temperature Decoupling of SiC MOSFETs

    by Jinbo Li, Shilin Shen, Qunfang Wu, Shiyu Qiu, Qin Wang, Wei Su, Pengfei Yu

    By monitoring the indicators of junction temperature and gate-oxide degradation in real-time, it is possible to achieve online evaluation of the health status of SiC mosfets. Existing methods commonly employ electrical parameters for condition monitoring. However, when Tj fluctuates, the indicators of gate-oxide degradation tend to drift, thereby increasing monitoring errors. Moreover, Tj estimating accuracy is reduced by the gate-oxide degradation effect because of the coupled relationship between temperature-sensitive parameters and gate-oxide degradation indicators. To address this issue, this article proposes a decoupled online monitoring method for Tj and gate-oxide degradation for SiC mosfets. First, the gate-oxide degradation model is established by theoretical analysis. It is found that the input capacitance Ciss under negative gate–source voltage varies with gate-oxide degradation, and it is not affected by Tj. Moreover, the peak value of gate turn-on current would decrease linearly with Tj, but gate-oxide degradation will lead to the drift of the Tj curve. Then, a decoupled evaluation strategy is proposed based on this foundation. Tj and gate-oxide degradation can be evaluated during the off-state individually. Finally, an online condition monitoring circuit is developed, and the experimental results indicate that the proposed method exhibits higher accuracy compared to the existing approaches, with a monitoring error within 4%.


  • Self-Excitation, Balanced, Passive Variable Inductor for Fast-Response Buck Converter

    by Menghan Jiang, Qunfang Wu, Qin Wang, Lan Xiao, Hao Niu

    To improve the transient response speed of single-phase voltage regulators (VRs), this article proposes a self-excitation, balanced, passive variable inductor for a fast-response buck converter. The dc bias component of the buck converter's inductor current intensifies with increasing load, acting as an excitation source that induces magnetic core saturation, achieving inductance reduction. This method eliminates reliance on external excitation. First, an analytical model for the proposed inductor structure is established and the iterative process is used to solve for the nonlinear magnetic flux density in this article. Then, the optimal design of the structure is achieved by the particle swarm optimization (PSO) algorithm. Finally, three 12 V/3.3 V@50 kHz buck converters were built for experimental comparison. Compared to a fixed inductor, the inductance of the proposed inductor decreases from 33 μH to 16 μH when switching the power from 50 W to 75 W, and the response time of the buck converter decreases from 4 ms to 1.2 ms.


  • An Improved Hybrid ZVS Modulation for SiC High-Frequency Three-Phase Inverter

    by Qunfang Wu, Xinwei Fan, Qin Wang, Xiao Lan

    In recent years, SiC three-phase inverters have been widely used in aviation electric propulsion systems due to their advanced performance. However, some challenges remain, such as the power loss at high-frequency switching and difficulty in further improving efficiency. To solve this problem, we proposed an improved hybrid zero-voltage-switching (ZVS) modulation for the high-frequency SiC three-phase inverter. It combines the variable current band control with the clamping modulation to achieve the ZVS during the full line-cycle, to further improve the efficiency. In this paper, the control target of about 120-degree clamp per phase and the soft-switching resonant period are analyzed in detail, and the variable current band is discussed. Still, the transient process of switching between the clamping mode and the high-frequency modulation mode is presented, which minimizes the additional power loss. Finally, a 5-kW/250 kHz proof-of-concept prototype was built and it can realize a peak efficiency of 98.88%, and the efficiency of the proposed method can be increased by 0.38% compared with existing similar modulation. All theoretical analyses and proposed modulation strategies are verified by the designed prototype.