Sergey G. Suchkov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sergey G. Suchkov has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
A. I. Timofeev
SPC Etna Plus, Saratov, Russia
2 shared publicationsV. V. Tretinnikov
SPC Etna Plus, Saratov, Russia
2 shared publicationsV. Ya. Yavchunovsky
SPC Etna Plus, Saratov, Russia
2 shared publications- Viktor Nikolaevtsev
Saratov State University, Saratov, Russia
2 shared publications Aleksey Pilovets
Saratov State University named after N.G.Chernyshevsky
1 shared publicationD. S. Suchkov
Saratov State University, 410012, Saratov, Russia
1 shared publication
Latest Publications
- 1 June 2023
- Published by Pleiades Publishing Ltd in Acoustical Physics
- Vol. 69 (3) , 381-387
Sound Generation by Metro Trains during Braking and Its Suppression Method
The causes of acoustic noise occurring during braking of electric vehicles, in particular, in the metro, were analyzed. The spectrum of such noise was measured, and it is shown that high-frequency discrete tones are excited by braking resistors, applied for electrodynamic braking of electric vehicles. Three proposed mechanisms of electromechanical interaction in a Fecral plate, which is a braking resistor element, were considered: the Ampère force and linear and nonlinear magnetostriction. It was shown that predominant odd harmonics indicate the presence of a significant piezomagnetic effect and the inverse effect of linear magnetostriction in the Fecral alloy. A phenomenological approach was used to calculate the piezomagnetic tensor elements for Fecral. Calculations by the finite element method showed that asymmetric cuts introduced into the plate may significantly decrease intensity of acoustic vibrations excited by the braking resistor.
- 1 June 2023
- Published by Pleiades Publishing Ltd in Acoustical Physics
- Vol. 69 (3) , 381-387
Sound Generation by Metro Trains during Braking and Its Suppression Method
The causes of acoustic noise occurring during braking of electric vehicles, in particular, in the metro, were analyzed. The spectrum of such noise was measured, and it is shown that high-frequency discrete tones are excited by braking resistors, applied for electrodynamic braking of electric vehicles. Three proposed mechanisms of electromechanical interaction in a Fecral plate, which is a braking resistor element, were considered: the Ampère force and linear and nonlinear magnetostriction. It was shown that predominant odd harmonics indicate the presence of a significant piezomagnetic effect and the inverse effect of linear magnetostriction in the Fecral alloy. A phenomenological approach was used to calculate the piezomagnetic tensor elements for Fecral. Calculations by the finite element method showed that asymmetric cuts introduced into the plate may significantly decrease intensity of acoustic vibrations excited by the braking resistor.
- 1 May 2023
- Published by The Russian Academy of Sciences in Akustičeskij žurnal
- Vol. 69 (3) , 367-373
Sound Generation by Metro Trains during Braking and Its Suppression Method
О генерации звука поездами метро при торможении и метод его подавления
- 1 May 2023
- Published by The Russian Academy of Sciences in Akustičeskij žurnal
- Vol. 69 (3) , 367-373
Sound Generation by Metro Trains during Braking and Its Suppression Method
О генерации звука поездами метро при торможении и метод его подавления
- 24 August 2018
- Published by Springer Nature
- p. 316-326
Implementation of Unlimited Anticollision for RFID System by Multilateration Method
- 24 August 2018
- Published by Springer Nature
- p. 316-326
Implementation of Unlimited Anticollision for RFID System by Multilateration Method
- 2 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 61 (12) , 2149-2152
SAW tags for the 6-GHz range
The possibility of using 6-GHz frequencies for passive SAW tags is discussed. An example of an inline 6-GHz SAW tag design is presented. Supposing that an ultrawide frequency bandwidth B = 775 MHz can be used, the tag dimensions can be significantly reduced and the loss of reflected response remains at an acceptable level of around 50 dB. The devices were manufactured using E-beam lithography and, probed on wafer, show performance close to predicted, including the loss level of approximately 55 dB. The possibility of high-throughput manufacturing by combining nano-imprint and e-beam lithography is discussed.
- 2 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 61 (12) , 2149-2152
SAW tags for the 6-GHz range
The possibility of using 6-GHz frequencies for passive SAW tags is discussed. An example of an inline 6-GHz SAW tag design is presented. Supposing that an ultrawide frequency bandwidth B = 775 MHz can be used, the tag dimensions can be significantly reduced and the loss of reflected response remains at an acceptable level of around 50 dB. The devices were manufactured using E-beam lithography and, probed on wafer, show performance close to predicted, including the loss level of approximately 55 dB. The possibility of high-throughput manufacturing by combining nano-imprint and e-beam lithography is discussed.