Martha Sofia Orjuela-Abril
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martha Sofia Orjuela-Abril has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
J P Rojas Suárez
Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia
9 shared publications- Carlos Pardo García
Department of Systems Engineering, Universidad Francisco de Paula Santander
5 shared publications - Gaudy Carolina Prada Botia
Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia
4 shared publications J A Pabón León
Universidad Francisco de Paula Santander, San José de Cúcuta, Colombia
4 shared publications- Jhan Piero Rojas-Suárez
Facultad de Ingeniería, Universidad Francisco de Paula Santander, Cúcuta 540003, Colombia
4 shared publications - José Orlando García-Mendoza
Universidad Francisco de Paula Santander, Cúcuta, Colombia
4 shared publications
Latest Publications
- Open Access
- 24 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (7) , 5720
Innovative Technology Strategies for the Sustainable Development of Self-Produced Energy in the Colombian Industry
This research studies the current state of the Colombian industrial sector, which is focused on self-generation processes. The study’s objective is to search for viable technological strategies that strengthen this particular sector’s competitiveness and sustainable development. The analysis shows that internal combustion engines represent 49% of the technologies used for self-generation. The main fuel used in the sector is natural gas, with a percentage of 56%. The lack of strategies for the use of residual heat and technological inefficiencies caused a loss of 36% in the energy used in the Colombian industrial sector. Thermoelectric generators are a feasible way to recover energy from exhaust gases in engines used for self-generation. Additionally, they allow a 4% reduction in fuel consumption and an improvement in the engine’s energy efficiency. The use of hydrogen as fuel allows a 30% reduction in polluting emissions, such as CO2, CO, HC, and particulate matter. Hydrogen production processes, such as water electrolysis, allow the participation of Colombia’s solar energy potential, leading to sustainable hydrogen production, efficiency (60–80%), and a lower economic cost. In general, the application of thermoelectric generators and the use of hydrogen gas allow the improvement of the Colombian industrial sector’s environmental, social, and economic aspects due to greater competitiveness and the reduction in emissions and operating costs.
- 24 March 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (7) , 5720
Open AccessInnovative Technology Strategies for the Sustainable Development of Self-Produced Energy in the Colombian Industry
This research studies the current state of the Colombian industrial sector, which is focused on self-generation processes. The study’s objective is to search for viable technological strategies that strengthen this particular sector’s competitiveness and sustainable development. The analysis shows that internal combustion engines represent 49% of the technologies used for self-generation. The main fuel used in the sector is natural gas, with a percentage of 56%. The lack of strategies for the use of residual heat and technological inefficiencies caused a loss of 36% in the energy used in the Colombian industrial sector. Thermoelectric generators are a feasible way to recover energy from exhaust gases in engines used for self-generation. Additionally, they allow a 4% reduction in fuel consumption and an improvement in the engine’s energy efficiency. The use of hydrogen as fuel allows a 30% reduction in polluting emissions, such as CO2, CO, HC, and particulate matter. Hydrogen production processes, such as water electrolysis, allow the participation of Colombia’s solar energy potential, leading to sustainable hydrogen production, efficiency (60–80%), and a lower economic cost. In general, the application of thermoelectric generators and the use of hydrogen gas allow the improvement of the Colombian industrial sector’s environmental, social, and economic aspects due to greater competitiveness and the reduction in emissions and operating costs.
- Open Access
- 28 February 2023
- Published by Universidad Libre in Saber, Ciencia y Libertad
- Vol. 18 (1) , 480-498
Universalidad y gestión competitiva
The article is a derivation of the completed study “universality and Explicit knowledge based on organizational theories”, it is based on the first level manager, from the perspective of competitive management and analyzes how prepared are the managers of Colombian companies in terms of professional training, highest degree of studies and complementary knowledge in management or administration. The above is established using as a tool a classical perspective representative of statistics, by means of a survey, where these aspects are investigated. The resulting product shows that a representative percentage of managers lack training in the subject, constituting a significant disadvantage in terms of competence compared to their adversaries; therefore, it is evident the need to raise awareness among academics, shareholders, owners and managers, to take into account the training of executives in managerial management.
- 28 February 2023
- Published by Universidad Libre in Saber, Ciencia y Libertad
- Vol. 18 (1) , 480-498
Open AccessUniversalidad y gestión competitiva
The article is a derivation of the completed study “universality and Explicit knowledge based on organizational theories”, it is based on the first level manager, from the perspective of competitive management and analyzes how prepared are the managers of Colombian companies in terms of professional training, highest degree of studies and complementary knowledge in management or administration. The above is established using as a tool a classical perspective representative of statistics, by means of a survey, where these aspects are investigated. The resulting product shows that a representative percentage of managers lack training in the subject, constituting a significant disadvantage in terms of competence compared to their adversaries; therefore, it is evident the need to raise awareness among academics, shareholders, owners and managers, to take into account the training of executives in managerial management.
- Open Access
- 25 April 2022
- Published by Universidad Distrital Francisco Jose de Caldas in Ingeniería
- Vol. 27 (2) , e17539
Análisis experimental de las características de emisión de motores diésel de baja cilindrada operando con mezclas de biodiésel de aceite de alga
La Revista INGENIERÍA es una publicación cuatrimestral de carácter científico editada por la Universidad Distrital Francisco José de Caldas. La Revista está dirigida a la comunidad académica, investigadores, sectores productivos, institutos de investigación y en general al público interesado en los temas del campo de la Ingeniería y Tecnología. Su principal objetivo es difundir y debatir avances en investigación a través de la publicación de artículos originales e inéditos, con pertinencia local o internacional. Context: The imminent concern regarding greenhouse gas emissions associated with internal combustion engines has motivated both the industrial and academic sectors to propose reliable solutions in order to mitigate the adverse effects of thermal machines. Partial fuel substitution with biodiesel blends is a promising, convenient, and diverse technology that can contribute to minimizing emission levels. Method: This study incorporated an experimental test bench for a low-displacement diesel engine that enabled control of the operating conditions in order to evaluate thermal performance, fuel metrics, and emission levels. An algae oil biodiesel blend at replacement percentages of 5% (AB5) and 15% (AB15) was produced via a transesterification technique. The performance evaluation was centered on the impact of the variable compression ratio and torque ranges of the engine. Results: The implementation of algae oil as a biodiesel blend reduced the emission levels of CO, CO2, and HC by 40-95% compared to diesel standalone operation. In contrast, it boosted NOx emissions in a reasonable proportion (<45%). Further emission minimization of CO and HC could be reached by increasing the compression ratio, but CO2 and NOx emissions were negatively affected. Moreover, increasing the compression ratio intensified the combustion pressure while improving both fuel consumption and thermal performance. Contrarily, a higher algae oil content in the biodiesel blend reduced the in-cylinder pressure, thus increasing the fuel consumption and reducing the thermal performance. Conclusions: In conclusion, biodiesel implementation demonstrated to be a robust tool to mitigate the global emissions of the engine to a great extent. The negative results regarding thermal performance and fuel consumption are a consequence of the higher density and lower heating value. However, this can be partially offset by increasing the compression ratio of the engine. The exploration of hydrogen and hydroxy is strongly recommended to contribute to enhancing the overall performance of partial fuel substitution technologies. Contexto: La inminente preocupación en torno a la emisión de gases de efecto invernadero asociada a los motores de combustión interna ha motivado a la industria y la academia a proponer soluciones confiables para mitigar los efectos adversos de las maquinas térmicas. La sustitución parcial de combustible es una diversa, conveniente y prometedora tecnología que puede contribuir a minimizar los niveles de emisión. Método: El estudio incorporó un montaje para pruebas experimentales de un motor diésel de baja cilindrada que permite controlar las condiciones de operación para evaluar el desempeño térmico, de consumo de combustible y de niveles de emisión. Se produjo una mezcla biodiésel de aceite de alga a un porcentaje de substitución del 5 % (AB5) y 15 % (AB15) a través de una técnica de transesterificación. La evaluación de desempeño se centró en el impacto de la relación de compresión variable y el margen de torque del motor. Resultados: La implementación del aceite de alga como mezcla biodiésel redujo los niveles de emisión del CO, CO2 y HC en un 40-95 % en comparación con la operación autónoma de diésel comercial. En contraste, se incrementaron las emisiones de NOx en una proporción razonable (<45%). Se pudo obtener una minimización adicional de las emisiones de CO y HC al incrementar la relación de compresión, pero las emisiones de CO2 y NOx fueron negativamente afectadas. Adicionalmente, al aumentar la relación de compresión se incrementó la presión durante la combustión, lo cual mejoró el consumo de combustible y el desempeño térmico. Contrariamente, un mayor contenido de aceite de alga en la mezcla biodiesel redujo la presión dentro del cilindro, lo que aumentó el consumo de combustible y redujo el desempeño térmico. Conclusiones: En conclusión, la implementación de biodiésel demostró ser una herramienta robusta para mitigar en gran medida las emisiones globales del motor. Los resultados negativos en cuanto a desempeño térmico y consumo de combustible son consecuencia de la alta densidad y la menor capacidad calorífica. Sin embargo, esto puede ser parcialmente contrarrestado al incrementar la relación de compresión del motor. La exploración del hidrógeno e hydroxy es alta recomendada para contribuir a mejorar el desempeño global de las tecnologías de sustitución parcial de combustible.
- 25 April 2022
- Published by Universidad Distrital Francisco Jose de Caldas in Ingeniería
- Vol. 27 (2) , e17539
Open AccessAnálisis experimental de las características de emisión de motores diésel de baja cilindrada operando con mezclas de biodiésel de aceite de alga
La Revista INGENIERÍA es una publicación cuatrimestral de carácter científico editada por la Universidad Distrital Francisco José de Caldas. La Revista está dirigida a la comunidad académica, investigadores, sectores productivos, institutos de investigación y en general al público interesado en los temas del campo de la Ingeniería y Tecnología. Su principal objetivo es difundir y debatir avances en investigación a través de la publicación de artículos originales e inéditos, con pertinencia local o internacional. Context: The imminent concern regarding greenhouse gas emissions associated with internal combustion engines has motivated both the industrial and academic sectors to propose reliable solutions in order to mitigate the adverse effects of thermal machines. Partial fuel substitution with biodiesel blends is a promising, convenient, and diverse technology that can contribute to minimizing emission levels. Method: This study incorporated an experimental test bench for a low-displacement diesel engine that enabled control of the operating conditions in order to evaluate thermal performance, fuel metrics, and emission levels. An algae oil biodiesel blend at replacement percentages of 5% (AB5) and 15% (AB15) was produced via a transesterification technique. The performance evaluation was centered on the impact of the variable compression ratio and torque ranges of the engine. Results: The implementation of algae oil as a biodiesel blend reduced the emission levels of CO, CO2, and HC by 40-95% compared to diesel standalone operation. In contrast, it boosted NOx emissions in a reasonable proportion (<45%). Further emission minimization of CO and HC could be reached by increasing the compression ratio, but CO2 and NOx emissions were negatively affected. Moreover, increasing the compression ratio intensified the combustion pressure while improving both fuel consumption and thermal performance. Contrarily, a higher algae oil content in the biodiesel blend reduced the in-cylinder pressure, thus increasing the fuel consumption and reducing the thermal performance. Conclusions: In conclusion, biodiesel implementation demonstrated to be a robust tool to mitigate the global emissions of the engine to a great extent. The negative results regarding thermal performance and fuel consumption are a consequence of the higher density and lower heating value. However, this can be partially offset by increasing the compression ratio of the engine. The exploration of hydrogen and hydroxy is strongly recommended to contribute to enhancing the overall performance of partial fuel substitution technologies. Contexto: La inminente preocupación en torno a la emisión de gases de efecto invernadero asociada a los motores de combustión interna ha motivado a la industria y la academia a proponer soluciones confiables para mitigar los efectos adversos de las maquinas térmicas. La sustitución parcial de combustible es una diversa, conveniente y prometedora tecnología que puede contribuir a minimizar los niveles de emisión. Método: El estudio incorporó un montaje para pruebas experimentales de un motor diésel de baja cilindrada que permite controlar las condiciones de operación para evaluar el desempeño térmico, de consumo de combustible y de niveles de emisión. Se produjo una mezcla biodiésel de aceite de alga a un porcentaje de substitución del 5 % (AB5) y 15 % (AB15) a través de una técnica de transesterificación. La evaluación de desempeño se centró en el impacto de la relación de compresión variable y el margen de torque del motor. Resultados: La implementación del aceite de alga como mezcla biodiésel redujo los niveles de emisión del CO, CO2 y HC en un 40-95 % en comparación con la operación autónoma de diésel comercial. En contraste, se incrementaron las emisiones de NOx en una proporción razonable (<45%). Se pudo obtener una minimización adicional de las emisiones de CO y HC al incrementar la relación de compresión, pero las emisiones de CO2 y NOx fueron negativamente afectadas. Adicionalmente, al aumentar la relación de compresión se incrementó la presión durante la combustión, lo cual mejoró el consumo de combustible y el desempeño térmico. Contrariamente, un mayor contenido de aceite de alga en la mezcla biodiesel redujo la presión dentro del cilindro, lo que aumentó el consumo de combustible y redujo el desempeño térmico. Conclusiones: En conclusión, la implementación de biodiésel demostró ser una herramienta robusta para mitigar en gran medida las emisiones globales del motor. Los resultados negativos en cuanto a desempeño térmico y consumo de combustible son consecuencia de la alta densidad y la menor capacidad calorífica. Sin embargo, esto puede ser parcialmente contrarrestado al incrementar la relación de compresión del motor. La exploración del hidrógeno e hydroxy es alta recomendada para contribuir a mejorar el desempeño global de las tecnologías de sustitución parcial de combustible.
- Open Access
- 7 April 2022
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 61
CFD Analysis of the Effect of Dimples and Cylinder Liner Honing Groove on the Tribological Characteristics of a Low Displacement Engine
The contact between the piston rings and the cylinder liner is an interface with a strong influence on the tribological behavior and, therefore, directly affects the useful life of the engine components and fuel consumption. Due to this importance, the present investigation carried out an analysis of the effects of dimples and the honing groove in the cylinder liner on the tribological characteristics. A tribological model was developed to study the friction forces, minimum film thickness, and friction coefficient for the present investigation. Similarly, a computational fluid dynamics model was built to determine the dynamic movement of the piston. The validation of the numerical model showed a close similarity with the real behavior of the engine, obtaining an average relative error of 14%. The analysis of the results showed that a 3% increase in dimples’ density leads to a 3.79% increase in the minimum lubricant film and a 2.76% decrease in friction force. Additionally, it was shown that doubling the radius and depth of the dimple produces an increase of 3.86% and 1.91% in the thickness of the lubrication film. The most suitable distribution of the dimples on the surface of the cylinder liner corresponds to a square array. In general, the application of dimples and honing grooves in the cylinder liner are promising alternatives to reduce energy losses and minimize wear of engine components.
- 7 April 2022
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 61
Open AccessCFD Analysis of the Effect of Dimples and Cylinder Liner Honing Groove on the Tribological Characteristics of a Low Displacement Engine
The contact between the piston rings and the cylinder liner is an interface with a strong influence on the tribological behavior and, therefore, directly affects the useful life of the engine components and fuel consumption. Due to this importance, the present investigation carried out an analysis of the effects of dimples and the honing groove in the cylinder liner on the tribological characteristics. A tribological model was developed to study the friction forces, minimum film thickness, and friction coefficient for the present investigation. Similarly, a computational fluid dynamics model was built to determine the dynamic movement of the piston. The validation of the numerical model showed a close similarity with the real behavior of the engine, obtaining an average relative error of 14%. The analysis of the results showed that a 3% increase in dimples’ density leads to a 3.79% increase in the minimum lubricant film and a 2.76% decrease in friction force. Additionally, it was shown that doubling the radius and depth of the dimple produces an increase of 3.86% and 1.91% in the thickness of the lubrication film. The most suitable distribution of the dimples on the surface of the cylinder liner corresponds to a square array. In general, the application of dimples and honing grooves in the cylinder liner are promising alternatives to reduce energy losses and minimize wear of engine components.
- Open Access
- 7 April 2022
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 60
Study of the Cylinder Deactivation on Tribological Parameters and Emissions in an Internal Combustion Engine
In the present investigation, a study is carried out using numerical simulation on the effects of cylinder deactivation on tribological parameters and emissions in an internal combustion engine. For the development of the research, a tribological model was used to predict the characteristics of the lubrication film, friction conditions, blow-by gas, and deformation of the piston rings. Additionally, the construction of a CFD model was carried out to describe the kinematic movement of the engine piston. The analysis of results allowed for the demonstration of the active cylinders presenting an increase of 21.53% and 7.65% in the pressure and temperature in the cylinder wall. Additionally, the active cylinders present a reduction of 11.33% in the minimum thickness of the lubrication film and an increase in the friction force due to asperities, which implies an increase of 33% in power losses due to friction. The implementation of technologies such as cylinder deactivation causes an increase in combustion gas leaks caused by the increase in pressure of the active cylinders. However, the use of this technology allows reducing 9.09%, 8.26%, and 7.41% in CO, HC, and NO emissions. Although the use of technologies such as cylinder deactivation allows significant fuel savings, it is necessary to consider the negative effects caused by this technology, such as the increase in combustion gas leaks and the increase in power loss by the greatest frictional forces.
- 7 April 2022
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 60
Open AccessStudy of the Cylinder Deactivation on Tribological Parameters and Emissions in an Internal Combustion Engine
In the present investigation, a study is carried out using numerical simulation on the effects of cylinder deactivation on tribological parameters and emissions in an internal combustion engine. For the development of the research, a tribological model was used to predict the characteristics of the lubrication film, friction conditions, blow-by gas, and deformation of the piston rings. Additionally, the construction of a CFD model was carried out to describe the kinematic movement of the engine piston. The analysis of results allowed for the demonstration of the active cylinders presenting an increase of 21.53% and 7.65% in the pressure and temperature in the cylinder wall. Additionally, the active cylinders present a reduction of 11.33% in the minimum thickness of the lubrication film and an increase in the friction force due to asperities, which implies an increase of 33% in power losses due to friction. The implementation of technologies such as cylinder deactivation causes an increase in combustion gas leaks caused by the increase in pressure of the active cylinders. However, the use of this technology allows reducing 9.09%, 8.26%, and 7.41% in CO, HC, and NO emissions. Although the use of technologies such as cylinder deactivation allows significant fuel savings, it is necessary to consider the negative effects caused by this technology, such as the increase in combustion gas leaks and the increase in power loss by the greatest frictional forces.
- Open Access
- 5 April 2022
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 59
Investigation of Emission Characteristics and Lubrication Oil Properties in a Dual Diesel–Hydrogen Internal Combustion Engine
Hydrogen is considered one of the main gaseous fuels due to its ability to improve thermal performance in diesel engines. However, its influence on the characteristics of lubricating oil is generally ignored. Thus, in the present investigation, an analysis of the effect on the physical and chemical properties of lubricating oil with mixtures of diesel fuel–hydrogen was carried out, and the environmental impacts of this type of mixture were assessed. The development of the research was carried out using a diesel engine under four torque conditions (80 Nm, 120 Nm, 160 Nm and 200 Nm) and three hydrogen gas flow conditions (0.75 lpm, 1.00 lpm and 1.25 lpm). From the results, it was possible to demonstrate that the presence of hydrogen caused decreases of 3.50%, 6.79% and 4.42% in the emissions of CO, HC, and smoke opacity, respectively. However, hydrogen further decreased the viscosity of the lubricating oil by 26%. Additionally, hydrogen gas produced increases of 17.7%, 29.27%, 21.95% and 27.41% in metallic components, such as Fe, Cu, Al and Cr, respectively. In general, hydrogen favors the contamination and oxidation of lubricating oil, which implies a greater wear of the engine components. Due to the significantly negative impact of hydrogen on the lubrication system, it should be considered due to its influence on the economic and environmental cost during the engine’s life cycle.
- 5 April 2022
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 59
Open AccessInvestigation of Emission Characteristics and Lubrication Oil Properties in a Dual Diesel–Hydrogen Internal Combustion Engine
Hydrogen is considered one of the main gaseous fuels due to its ability to improve thermal performance in diesel engines. However, its influence on the characteristics of lubricating oil is generally ignored. Thus, in the present investigation, an analysis of the effect on the physical and chemical properties of lubricating oil with mixtures of diesel fuel–hydrogen was carried out, and the environmental impacts of this type of mixture were assessed. The development of the research was carried out using a diesel engine under four torque conditions (80 Nm, 120 Nm, 160 Nm and 200 Nm) and three hydrogen gas flow conditions (0.75 lpm, 1.00 lpm and 1.25 lpm). From the results, it was possible to demonstrate that the presence of hydrogen caused decreases of 3.50%, 6.79% and 4.42% in the emissions of CO, HC, and smoke opacity, respectively. However, hydrogen further decreased the viscosity of the lubricating oil by 26%. Additionally, hydrogen gas produced increases of 17.7%, 29.27%, 21.95% and 27.41% in metallic components, such as Fe, Cu, Al and Cr, respectively. In general, hydrogen favors the contamination and oxidation of lubricating oil, which implies a greater wear of the engine components. Due to the significantly negative impact of hydrogen on the lubrication system, it should be considered due to its influence on the economic and environmental cost during the engine’s life cycle.
- Open Access
- 1 December 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2139 (1) , 012006
Numerical simulation to evaluate the influence of geometric parameters on the physical behavior of heat exchangers
In the present investigation, a methodology was developed by means of numerical simulation for the evaluation of the influence of the geometric parameters of the heat exchangers used in thermoelectric generation devices. The validation of the proposed methodology was carried out through experimental tests on a diesel engine test bench under four load conditions (2 Nm, 4 Nm, 6 Nm, and 8 Nm) and a constant speed of 3600 rpm. The results obtained show that the methodology proposed by means of the numerical simulation presents a high concordance with the behavior described experimentally. The deviation between the simulation predictions and the experimental results was less than 4%. Additionally, it was evidenced that the change in the geometry of the heat exchanger has a considerable impact on the parameters of heat flow and surface temperature. It was shown that a 50% reduction in fin distance causes an increase of 2% and 2.4% in the previous parameters. Through geometric modifications, the electrical power generated increased by 7.9%. In general, the methodology developed through numerical simulation allows the analysis of the physical, thermal, and hydraulic phenomena present in heat exchangers focused on use in thermoelectric devices.
- 1 December 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2139 (1) , 012006
Open AccessNumerical simulation to evaluate the influence of geometric parameters on the physical behavior of heat exchangers
In the present investigation, a methodology was developed by means of numerical simulation for the evaluation of the influence of the geometric parameters of the heat exchangers used in thermoelectric generation devices. The validation of the proposed methodology was carried out through experimental tests on a diesel engine test bench under four load conditions (2 Nm, 4 Nm, 6 Nm, and 8 Nm) and a constant speed of 3600 rpm. The results obtained show that the methodology proposed by means of the numerical simulation presents a high concordance with the behavior described experimentally. The deviation between the simulation predictions and the experimental results was less than 4%. Additionally, it was evidenced that the change in the geometry of the heat exchanger has a considerable impact on the parameters of heat flow and surface temperature. It was shown that a 50% reduction in fin distance causes an increase of 2% and 2.4% in the previous parameters. Through geometric modifications, the electrical power generated increased by 7.9%. In general, the methodology developed through numerical simulation allows the analysis of the physical, thermal, and hydraulic phenomena present in heat exchangers focused on use in thermoelectric devices.