RGRi-Yao Guo

Ri-Yao Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ri-Yao Guo has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design of a High-Gain Duplex Antenna With Multibeam Radiation Based on a Fabry-Pérot Cavity

    by Ji-Wei Huang, Ri-Yao Guo, Ruize Gao, Qing-Yi Guo

    A high-gain duplex antenna with multibeam radiation based on a Fabry–Pérot Cavity (FPC) is proposed in this paper. For the performance, it is the first FPC antenna integrated with duplex and multi-beam radiation. It is the first endeavor to apply a wideband FPC to a duplex antenna with two channels, aiming at significantly enhancing their realized gains and subsequently achieving three switchable directive beams. Firstly, a low-profile duplex slot antenna with two isolated channels (9.4 and 10.7 GHz) is designed. Then, to enhance the realized gains for two channels simultaneously, a wideband FPC with a stepped reflective ground is designed and combined with the proposed duplex slot antenna. The upper ground of the duplex antenna can be reused as the reflector for FPC. Even there three duplex sources on the ground, it will not affect the reflectivity of the wave in FPC due to the relatively small radiation aperture of the slot. By utilizing this method, the experimental results show that the realized gains of two channels are increased to 15.2 and 16.2 dBi, respectively, which are improved by more than 12 dB. Finally, three duplex slot antennas are placed on the bottom of the FPC, and excited individually. For two channels, the H-plane directive beams can be switched at −18°, 0°, and 18° relative to its broadside direction. The proposed antenna is a good candidate for vehicular communications systems such as vehicle-satellite and low-altitude communication where requires low profile, wide coverage range and long-distance data transmission.


  • High-Gain Omnidirectional Transmitarray Antenna

    by Peicong Chen, Yue Zhao, Xujun Yang, Ri-Yao Guo, Yujian Li, Lei Ge

    A new omnidirectional transmitarray antenna (TA) is proposed to realize the high gain and high omnidirectionality for millimeter-wave (mmW) applications. The antenna consists of a feeding probe as the source of the TA and an annular receiving/transmitting (Re/Tr) array surrounding the probe. The Re/Tr unit cell is composed of a pair of back-to-back angled dipoles and a delay line. The unit cell utilizes the rotation freedom of the direction of the Tr unit for a 0°/180° phase shift (1 bit), and an additional delay line between the Re and Tr cells for a continuous phase shift between 180°. Then, 1 bit+ Re/Tr unit cells with a continuous phase shift between 0° and 360° are built to form an omnidirectional array. By tuning the phase distribution of the longitudinal cells, the array can compress a wide conical omnidirectional beam from the probe radiator into a high-gain narrow omnidirectional beam in the azimuth plane. Measurement results show that the operating bandwidth of the antenna is 14.2% (from 26.1 to 30.1 GHz), within which the antenna can achieve a high gain of around 8.0 dBi and a stable omnidirectional beam. The design that transplants the concept of TA into a high-gain omnidirectional antenna is proposed for the first time. The proposed omnidirectional TA shows the advantages of remarkable omnidirectionality, broad bandwidth, and low cross-polarization level.


  • A Two-Port RF Device Integrating Dual-Polarized Filtenna and Bandpass Filter Functions With Independent Reconfigurability

    by Ri-Yao Guo, Qing-Yi Guo, Yue Zhao, Peicong Chen, Xujun Yang, Yao Zhang, Chow-Yen-Desmond Sim, Lei Ge

    In this communication, a two-port RF device integrating polarization-reconfigurable dual-polarized filtenna (PRDPF) and frequency-reconfigurable bandpass filter (FRBF) functions is proposed. For the PRDPF function, a quarter-dielectric-wavelength open stub is introduced into the feedline of each port, enhancing the roll-off rate at the upper-band edge of the realized gain. A 3D-printed polarizer is implemented over the proposed RF device to achieve polarization reconfigurability. For the FRBF realization, two resonators are connected to the feedlines, providing a filtering transmission path at the lower frequency spectrum without occupying extra area. By inserting the varactors into the filtering transmission path, the operating frequency of the filter can be tuned continuously with a constant bandwidth. Experimental results show that the device functions as a PRDPF at 3.7 GHz, and simultaneously as a FRBF at around 2.1 GHz. As for the PRDPF function, the measured average gains of 9.8 dBi and 9.5 dBic are obtained for the linearly and circularly polarized (LP and CP) states, respectively, with the out-of-band suppression levels of more than 22 dB. The measured overlapped bandwidth of impedance matching (| S 11 |, | S 22 | < -10 dB) and axial ratio (AR) < 3 dB is 17%. With respect to the FRBF operation, three tunable operating bands with a constant bandwidth of 20% are illustrated. With the innovative reuse of the feeding network, the proposed structure provides a design method for the future communication systems with high integration level.