Toshihiro Aoki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Toshihiro Aoki has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Maxx Q. Arguilla
University of California Irvine
8 shared publications - Dmitri Leo Mesoza Cordova
University of California Irvine
6 shared publications - Griffin Milligan
University of California Irvine
5 shared publications - Kaleolani Ogura
University of California Irvine
3 shared publications - Brian Y. Zhi
University of California Irvine
2 shared publications - Dmitry A. Fishman
University of California Irvine
2 shared publications
Latest Publications
- Open Access
- 4 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Non-covalent inter-chain interactions dictate single chain encapsulation behavior of pnictogen chalcogenides within van der Waals nanotubes
A fully developed understanding of the chemistry that governs interactions in low-dimensional materials is essential to realizing control over their structure, nanoscale morphology, and distinct physical properties. Yet, precisely achieving this in extended solids comprised of highly polarizable main group elements has remained a grand challenge especially in one-dimensional materials that approach the atomic scale. This is owing to the propensity of these heavy main group elements to drive the unusual localization or delocalization behavior of electrons in the system and the formation of competing metastable polytypes due to lone pair effects. In this report, we establish the composition-dependent encapsulation behavior of single chains derived from the low-dimensional Pn2Ch3 pnictogen chalcogenide class (Pn = Sb, Bi; Ch = S, Se, Te) and their strong dependence on the strength of inter-chain non-covalent interactions. Using Sb2S3 and Bi2S3 as model phases, we find that the degree of pnictogen (Pn) bonding is a significant factor in dictating the packing of the constituent quasi-1D chains in the bulk and their growth behavior as single chains upon encapsulation within single-walled carbon nanotubes (SWCNTs). Specifically, chains with weaker inter-chain interactions like Sb2S3 preferentially crystallize under slow-cooled growth parameters that resemble more thermodynamically preferred conditions while chains with stronger inter-chain interactions like Bi2S3 prefer to crystallize and isolate as bulk and only form the elusive encapsulated clustered and crystalline chain domains under rapidly quenched conditions. Systematic Sb/Bi alloying of the precursors revealed the pnictogen-dependence of the chain crystallization where Sb-rich alloys tend to more preferentially crystallize within SWCNTs. In these alloys, Bi preferentially occupies the peripheral three-coordinate site to maximize inter-chain interactions in the bulk, while Sb preferentially occupies the same site when encapsulated within SWCNT and devoid of chains adjacent to it. These results demonstrate that non-covalent bonding concepts in molecular main group systems track in low-dimensional solids that approach the atomic regime when encapsulated within nanotubes, marking a significant step forward in the rational and predictable encapsulation of all-inorganic chains within confined spaces.
- 4 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessNon-covalent inter-chain interactions dictate single chain encapsulation behavior of pnictogen chalcogenides within van der Waals nanotubes
A fully developed understanding of the chemistry that governs interactions in low-dimensional materials is essential to realizing control over their structure, nanoscale morphology, and distinct physical properties. Yet, precisely achieving this in extended solids comprised of highly polarizable main group elements has remained a grand challenge especially in one-dimensional materials that approach the atomic scale. This is owing to the propensity of these heavy main group elements to drive the unusual localization or delocalization behavior of electrons in the system and the formation of competing metastable polytypes due to lone pair effects. In this report, we establish the composition-dependent encapsulation behavior of single chains derived from the low-dimensional Pn2Ch3 pnictogen chalcogenide class (Pn = Sb, Bi; Ch = S, Se, Te) and their strong dependence on the strength of inter-chain non-covalent interactions. Using Sb2S3 and Bi2S3 as model phases, we find that the degree of pnictogen (Pn) bonding is a significant factor in dictating the packing of the constituent quasi-1D chains in the bulk and their growth behavior as single chains upon encapsulation within single-walled carbon nanotubes (SWCNTs). Specifically, chains with weaker inter-chain interactions like Sb2S3 preferentially crystallize under slow-cooled growth parameters that resemble more thermodynamically preferred conditions while chains with stronger inter-chain interactions like Bi2S3 prefer to crystallize and isolate as bulk and only form the elusive encapsulated clustered and crystalline chain domains under rapidly quenched conditions. Systematic Sb/Bi alloying of the precursors revealed the pnictogen-dependence of the chain crystallization where Sb-rich alloys tend to more preferentially crystallize within SWCNTs. In these alloys, Bi preferentially occupies the peripheral three-coordinate site to maximize inter-chain interactions in the bulk, while Sb preferentially occupies the same site when encapsulated within SWCNT and devoid of chains adjacent to it. These results demonstrate that non-covalent bonding concepts in molecular main group systems track in low-dimensional solids that approach the atomic regime when encapsulated within nanotubes, marking a significant step forward in the rational and predictable encapsulation of all-inorganic chains within confined spaces.
- Open Access
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Dimensionally resolved nanostructures of an atomically precise and optically active 1D van der Waals helix
Inorganic freestanding helices are rare and are sought-after for their unusual physical states endowed by chirality. To this end, III-VI-VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the instrinsic and size-dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, we present a bottom-up strategy to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, we were able to grow single crystals of 1D nanowires with thicknesess in the 10 to 100 nm range at high temperature conditions, as well as quasi-2D nanoribbons at lower temperatures. We establish the band gap of the nanowires in the UV region and demonstrate the persistence of nonlinear optical behavior originating from the non-centrosymmetric crystal structure of GaSI. Inspired by these results, we probe the effect of chirality on the electronic structure of hypothetical single chains of GaSI from first principles and show the pronounced handedness-dependent and chirality-driven spin polarization at the single helix regime.
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDimensionally resolved nanostructures of an atomically precise and optically active 1D van der Waals helix
Inorganic freestanding helices are rare and are sought-after for their unusual physical states endowed by chirality. To this end, III-VI-VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the instrinsic and size-dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, we present a bottom-up strategy to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, we were able to grow single crystals of 1D nanowires with thicknesess in the 10 to 100 nm range at high temperature conditions, as well as quasi-2D nanoribbons at lower temperatures. We establish the band gap of the nanowires in the UV region and demonstrate the persistence of nonlinear optical behavior originating from the non-centrosymmetric crystal structure of GaSI. Inspired by these results, we probe the effect of chirality on the electronic structure of hypothetical single chains of GaSI from first principles and show the pronounced handedness-dependent and chirality-driven spin polarization at the single helix regime.
- Open Access
- 28 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Precision synthesis of a one-dimensional single chain polymorph of Sb2Te3 within single-walled carbon nanotubes
The discovery and synthesis of atomically precise low-dimensional inorganic solids has led to numerous unusual structural motifs and nascent physical properties. However, access to low-dimensional van der Waals (vdW)-bound analogues of bulk crystals is often limited by chemical considerations arising from structural factors like atomic radii, bonding or coordination, and electronegativity. Using single-walled carbon nanotubes (SWCNTs) as confinement templates, we demonstrate the synthesis of a new 0.67 eV gap quasi-one-dimensional (q-1D) chain polymorph of Sb2Te3 ([Sb4Te6]n) that is structurally and electronically distinct from its 2D counterpart. We found that the q-1D chain polymorph has both three- and five-coordinate Sb atoms covalently bonded to Te and is thermodynamically stabilized by the electrostatic interaction between the encapsulated chain and the model SWCNT. These complementary results demonstrate the synthetic advantage of vdW nanotube confinement in the discovery of low-dimensional polytypes with drastically altered physical properties and potential applications in energy conversion processes.
- 28 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPrecision synthesis of a one-dimensional single chain polymorph of Sb2Te3 within single-walled carbon nanotubes
The discovery and synthesis of atomically precise low-dimensional inorganic solids has led to numerous unusual structural motifs and nascent physical properties. However, access to low-dimensional van der Waals (vdW)-bound analogues of bulk crystals is often limited by chemical considerations arising from structural factors like atomic radii, bonding or coordination, and electronegativity. Using single-walled carbon nanotubes (SWCNTs) as confinement templates, we demonstrate the synthesis of a new 0.67 eV gap quasi-one-dimensional (q-1D) chain polymorph of Sb2Te3 ([Sb4Te6]n) that is structurally and electronically distinct from its 2D counterpart. We found that the q-1D chain polymorph has both three- and five-coordinate Sb atoms covalently bonded to Te and is thermodynamically stabilized by the electrostatic interaction between the encapsulated chain and the model SWCNT. These complementary results demonstrate the synthetic advantage of vdW nanotube confinement in the discovery of low-dimensional polytypes with drastically altered physical properties and potential applications in energy conversion processes.
- Open Access
- 24 July 2024
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 30 (Supplement)
Analytical S/TEM to Understand Structure and Chemistry of Dimensionally Resolved 1D and Quasi-2D van der Waals Sb2S3 Nanocrystals
Physical properties of solids are intrinsically tied to structure. Quasi-one-dimensional van der Waals (q-1D vdW) solids consist of individual chain subunits held together by weak non-covalent forces. For q-1D vdW phases such as Sb2S3, the non-covalent interactions between chains are not equivalent, suggesting that energies of different lattice planes are drastically different. Synthetically controlling growth along these crystal directions enables the precise synthesis of nanostructures with axis-specific and high-symmetry crystalline facets. Such ability to control crystal habits and exposed crystal facets in Sb2S3 nanostructures can maximize orientation-dependent properties related to fluorescence, electrocatalysis, photovoltaics, and photodetection.
- 24 July 2024
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 30 (Supplement)
Open AccessAnalytical S/TEM to Understand Structure and Chemistry of Dimensionally Resolved 1D and Quasi-2D van der Waals Sb2S3 Nanocrystals
Physical properties of solids are intrinsically tied to structure. Quasi-one-dimensional van der Waals (q-1D vdW) solids consist of individual chain subunits held together by weak non-covalent forces. For q-1D vdW phases such as Sb2S3, the non-covalent interactions between chains are not equivalent, suggesting that energies of different lattice planes are drastically different. Synthetically controlling growth along these crystal directions enables the precise synthesis of nanostructures with axis-specific and high-symmetry crystalline facets. Such ability to control crystal habits and exposed crystal facets in Sb2S3 nanostructures can maximize orientation-dependent properties related to fluorescence, electrocatalysis, photovoltaics, and photodetection.
- Open Access
- 4 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Encapsulation of Crystalline and Amorphous Sb2S3 within Carbon and Boron Nitride Nanotubes
The recent rediscovery of 1D and quasi-1D (q-1D) van der Waals (vdW) crystals has laid foundation to the realization of emergent electronic, optical, and quantum-confined physical phenomena in both bulk and at the nanoscale. Of these, the highly anisotropic q-1D vdW crystal structure and the visible-light optical/optoelectronic properties of antimony trisulfide (Sb2S3) have led to its widespread consideration as a promising building block for photovoltaic and non-volatile phase change devices. However, while these applications will greatly benefit from well-defined and sub-nanometer-thick q-1D structures, little has been known about feasible synthetic routes that can access single covalent chains of Sb2S3. In this work, we explore how encapsulation in single or multi-walled carbon nanotubes (SWCNTs or MWCNTs) and visible-range transparent boron nitride nanotubes (BNNTs) influences the growth and phase of Sb2S3 nanostructures. We demonstrate that nanotubes with smaller diameters had a more pronounced effect in the crystallographic growth direction and orientation of Sb2S3 nanostructures, promoting the crystallization of the guest structures along the long-axis [010]-direction. As such, we were able to reliably access well-ordered few- to single covalent chains of Sb2S3 when synthesized within defect-free SWCNTs with sub-2 nm inner diameters. Intriguingly, we found that the degree of crystalline order of Sb2S3 nanostructures was strongly influenced by the presence of defects and discontinuities along the Sb2S3-nanotube interface. We show that amorphous nanowire domains of Sb2S3 form around defect sites in larger, multi-walled nanotubes that manifest inner wall defects and discontinuities, suggesting a means to manipulate the crystallization dynamics of confined sub-10 nm-thick Sb2S3 nanostructures within nanotubes. Lastly, we show that ultrathin, predominantly amorphous, Sb2S3 encapsulated within BNNTs can impart functionality onto the host nanotube, showing a ~30-fold increase in electrical conductivity and displayed photocurrent generation compared to empty BNNTs in pressed pellets. Altogether, our results serve to solidify the understanding of how q-1D vdW pnictogen chalcogenides crystallize within confined synthetic platforms and are a step towards realizing functional materials from ensembles of encapsulated heterostructures.
- 4 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEncapsulation of Crystalline and Amorphous Sb2S3 within Carbon and Boron Nitride Nanotubes
The recent rediscovery of 1D and quasi-1D (q-1D) van der Waals (vdW) crystals has laid foundation to the realization of emergent electronic, optical, and quantum-confined physical phenomena in both bulk and at the nanoscale. Of these, the highly anisotropic q-1D vdW crystal structure and the visible-light optical/optoelectronic properties of antimony trisulfide (Sb2S3) have led to its widespread consideration as a promising building block for photovoltaic and non-volatile phase change devices. However, while these applications will greatly benefit from well-defined and sub-nanometer-thick q-1D structures, little has been known about feasible synthetic routes that can access single covalent chains of Sb2S3. In this work, we explore how encapsulation in single or multi-walled carbon nanotubes (SWCNTs or MWCNTs) and visible-range transparent boron nitride nanotubes (BNNTs) influences the growth and phase of Sb2S3 nanostructures. We demonstrate that nanotubes with smaller diameters had a more pronounced effect in the crystallographic growth direction and orientation of Sb2S3 nanostructures, promoting the crystallization of the guest structures along the long-axis [010]-direction. As such, we were able to reliably access well-ordered few- to single covalent chains of Sb2S3 when synthesized within defect-free SWCNTs with sub-2 nm inner diameters. Intriguingly, we found that the degree of crystalline order of Sb2S3 nanostructures was strongly influenced by the presence of defects and discontinuities along the Sb2S3-nanotube interface. We show that amorphous nanowire domains of Sb2S3 form around defect sites in larger, multi-walled nanotubes that manifest inner wall defects and discontinuities, suggesting a means to manipulate the crystallization dynamics of confined sub-10 nm-thick Sb2S3 nanostructures within nanotubes. Lastly, we show that ultrathin, predominantly amorphous, Sb2S3 encapsulated within BNNTs can impart functionality onto the host nanotube, showing a ~30-fold increase in electrical conductivity and displayed photocurrent generation compared to empty BNNTs in pressed pellets. Altogether, our results serve to solidify the understanding of how q-1D vdW pnictogen chalcogenides crystallize within confined synthetic platforms and are a step towards realizing functional materials from ensembles of encapsulated heterostructures.
- Open Access
- 22 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Atomically precise inorganic helices with a programmable irrational twist
Helicity in atomic scale structures often arises from the precise ordering of cooperative intra- and inter-molecular bonding interactions. The exclusivity of these interactions to natural, organic, or molecular systems has limited the demonstration and understanding of helical motifs in densely packed solid-state lattices. Herein, we report that the ordering of Ga atoms in GaSeI, a representative crystal from an exfoliable class of atomically precise III-VI-VII 1D van der Waals (vdW) crystals, manifests the elusive Boerdijk-Coxeter (B-C) helix motif. B-C helicity is a rare non-repeating geometric pattern arising from the distinct face-sharing order of well-defined tetrahedra with adjacent vertices defined by an irrational rotational or twist angle, previously thought to only exist in macro- to molecular-scale structures but not at the atomic scale. Using InSeI and GaSeI as models, we show that the structural degree of freedom in a 1D vdW lattice generally allows for the systematic twisting of a tetrahelical lattice defined by a periodic 41 screw axis in InSeI to its infinitely extending B-C helix counterpart in GaSeI. Helical coordinate analysis of GaSeI reveals that the Ga atoms forming the [GaSe3I]∞ repeating motif display B-C helicity whereas Se and I atoms order as concentric tetrahelices that form B-C helix variants with systematically expanded helical radii. This discovery of ideal B-C helicity in optically active vdW lattices exfoliable down to single helix chains presents a distinctive materials platform towards understanding aperiodic helicity and chirality in low-dimensional solids, enabling new opportunities in designing well-defined solid state materials for quantum transport and long-range chirality-driven phenomena.
- 22 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessAtomically precise inorganic helices with a programmable irrational twist
Helicity in atomic scale structures often arises from the precise ordering of cooperative intra- and inter-molecular bonding interactions. The exclusivity of these interactions to natural, organic, or molecular systems has limited the demonstration and understanding of helical motifs in densely packed solid-state lattices. Herein, we report that the ordering of Ga atoms in GaSeI, a representative crystal from an exfoliable class of atomically precise III-VI-VII 1D van der Waals (vdW) crystals, manifests the elusive Boerdijk-Coxeter (B-C) helix motif. B-C helicity is a rare non-repeating geometric pattern arising from the distinct face-sharing order of well-defined tetrahedra with adjacent vertices defined by an irrational rotational or twist angle, previously thought to only exist in macro- to molecular-scale structures but not at the atomic scale. Using InSeI and GaSeI as models, we show that the structural degree of freedom in a 1D vdW lattice generally allows for the systematic twisting of a tetrahelical lattice defined by a periodic 41 screw axis in InSeI to its infinitely extending B-C helix counterpart in GaSeI. Helical coordinate analysis of GaSeI reveals that the Ga atoms forming the [GaSe3I]∞ repeating motif display B-C helicity whereas Se and I atoms order as concentric tetrahelices that form B-C helix variants with systematically expanded helical radii. This discovery of ideal B-C helicity in optically active vdW lattices exfoliable down to single helix chains presents a distinctive materials platform towards understanding aperiodic helicity and chirality in low-dimensional solids, enabling new opportunities in designing well-defined solid state materials for quantum transport and long-range chirality-driven phenomena.
- Open Access
- 21 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Functionalization and Structural Evolution of Conducting Quasi-One-Dimensional Chevrel-Type Telluride Nanocrystals
Interfacing organic molecular groups with well-defined inorganic lattices, especially in low dimensions, enables synthetic routes for the rational manipulation of both their local or extended lattice structures and physical properties. While appreciably studied in two-dimensional systems, the influence of surface organic substituents on many known and emergent one-dimensional (1D) and quasi-1D (q-1D) crystals has remained underexplored. Herein, we demonstrate the surface functionalization of bulk and nanoscale Chevrel-like q-1D ionic crystals using In2Mo6Te6, a predicted q-1D Dirac semimetal, as the model phase. Using a series of alkyl ammonium (—NR4+; R = H, methyl, ethyl, butyl, and octyl) substituents with varying chain lengths, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction with longer chain substituents. Additionally, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction as the alkyl chain substituents become longer using a combination of powder X-ray diffraction and Raman experiments. Beyond the structural modulation that the substituted groups can impose on the lattice, we also found that the substitution of ammonium-based groups on the surface of the nanocrystals resulted in selective suspension in aqueous (NH4+-functionalized) or organic solvents (NOc4+-functionalized), imparted fluorescent character (Rhodamine B-functionalized), and modulated the electrical conductivity of the nanocrystal ensemble. Altogether, our results underscore the potential of organic-inorganic interfacing strategies to tune the structural and physical properties of rediscovered Chevrel-type q-1D ionic solids and open opportunities for the development of surface-addressable building blocks for hybrid electronic and optoelectronic devices at the nanoscale.
- 21 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFunctionalization and Structural Evolution of Conducting Quasi-One-Dimensional Chevrel-Type Telluride Nanocrystals
Interfacing organic molecular groups with well-defined inorganic lattices, especially in low dimensions, enables synthetic routes for the rational manipulation of both their local or extended lattice structures and physical properties. While appreciably studied in two-dimensional systems, the influence of surface organic substituents on many known and emergent one-dimensional (1D) and quasi-1D (q-1D) crystals has remained underexplored. Herein, we demonstrate the surface functionalization of bulk and nanoscale Chevrel-like q-1D ionic crystals using In2Mo6Te6, a predicted q-1D Dirac semimetal, as the model phase. Using a series of alkyl ammonium (—NR4+; R = H, methyl, ethyl, butyl, and octyl) substituents with varying chain lengths, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction with longer chain substituents. Additionally, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction as the alkyl chain substituents become longer using a combination of powder X-ray diffraction and Raman experiments. Beyond the structural modulation that the substituted groups can impose on the lattice, we also found that the substitution of ammonium-based groups on the surface of the nanocrystals resulted in selective suspension in aqueous (NH4+-functionalized) or organic solvents (NOc4+-functionalized), imparted fluorescent character (Rhodamine B-functionalized), and modulated the electrical conductivity of the nanocrystal ensemble. Altogether, our results underscore the potential of organic-inorganic interfacing strategies to tune the structural and physical properties of rediscovered Chevrel-type q-1D ionic solids and open opportunities for the development of surface-addressable building blocks for hybrid electronic and optoelectronic devices at the nanoscale.
- Open Access
- 2 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Tuning grain boundary cation segregation with oxygen deficiency and atomic structure in a perovskite compositionally complex oxide thin film
Compositionally complex oxides (CCOs) are an emerging class of materials encompassing high entropy and entropy stabilized oxides (HEOs, ESOs). These promising advanced materials leverage tunable chemical bond structure, lattice distortion, and chemical disorder for unprecedented properties. Grain boundary (GB) and point defect segregation to GBs is relatively understudied in CCOs even though they can govern macroscopic material properties. For example, GB segregation can govern local chemical (dis)order and point defect distribution, playing a critical role in electrochemical reaction kinetics, and charge and mass transport in solid electrolytes. However, compared with conventional oxides, GBs in multi-cation CCO systems are expected to exhibit more complex segregation phenomena and thus prove more difficult to tune through GB design strategies. Here, GB segregation was studied in a model perovskite CCO LaFe0.7Ni0.1Co0.1Cu0.05Pd0.05O3-x textured thin film by (sub-)atomic-resolution scanning transmission electron microscopy imaging and spectroscopy. It is found that GB segregation is correlated with cation reducibility—predicted by an Ellingham diagram—as Pd and Cu segregate to GBs rich in oxygen vacancies (𝑉 𝑂 ∙∙). Furthermore, Pd and Cu segregation is highly sensitive to the concentration and spatial distribution of 𝑉 𝑂 ∙∙ along the GB plane, as well as fluctuations in atomic structure and elastic strain induced by GB local disorder, such as dislocations. This work offers a perspective of controlling segregation concentration of CCO cations to GBs by tuning reducibility of CCO cations and oxygen deficiency, which is expected to guide GB design in CCOs.
- 2 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTuning grain boundary cation segregation with oxygen deficiency and atomic structure in a perovskite compositionally complex oxide thin film
Compositionally complex oxides (CCOs) are an emerging class of materials encompassing high entropy and entropy stabilized oxides (HEOs, ESOs). These promising advanced materials leverage tunable chemical bond structure, lattice distortion, and chemical disorder for unprecedented properties. Grain boundary (GB) and point defect segregation to GBs is relatively understudied in CCOs even though they can govern macroscopic material properties. For example, GB segregation can govern local chemical (dis)order and point defect distribution, playing a critical role in electrochemical reaction kinetics, and charge and mass transport in solid electrolytes. However, compared with conventional oxides, GBs in multi-cation CCO systems are expected to exhibit more complex segregation phenomena and thus prove more difficult to tune through GB design strategies. Here, GB segregation was studied in a model perovskite CCO LaFe0.7Ni0.1Co0.1Cu0.05Pd0.05O3-x textured thin film by (sub-)atomic-resolution scanning transmission electron microscopy imaging and spectroscopy. It is found that GB segregation is correlated with cation reducibility—predicted by an Ellingham diagram—as Pd and Cu segregate to GBs rich in oxygen vacancies (𝑉 𝑂 ∙∙). Furthermore, Pd and Cu segregation is highly sensitive to the concentration and spatial distribution of 𝑉 𝑂 ∙∙ along the GB plane, as well as fluctuations in atomic structure and elastic strain induced by GB local disorder, such as dislocations. This work offers a perspective of controlling segregation concentration of CCO cations to GBs by tuning reducibility of CCO cations and oxygen deficiency, which is expected to guide GB design in CCOs.
- Open Access
- 27 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Directed Crystallization of a Nanoscale Quasi-1D van der Waals Topological Insulator
Anisotropy often yields unexpected structures and properties in the solid state. In van der Waals (vdW) solids comprised of 1D or quasi-1D (q-1D) chains, anisotropy in both intra- and inter-chain directions results in an abundance of packing motifs and altered physical states. Q-1D vdW solids with topologically protected states are most sought after due to their potential as building blocks for quantum and spintronic devices. Yet, access to such facet- and edge-specific states is limited by the stochastic nature of micromechanical exfoliation. Here, we demonstrate that Bi4I4, a q-1D vdW topological insulator, can be crystallized from the vapor phase either into nanowires or quasi-2D nanosheets. We find that gold nanoparticles (Au NPs) on the growth substrate, in conjunction with the anisotropic structure of Bi4I4, direct the dimensionality of Bi4I4 nanostructures. Systematic variation of Au NP diameters, Bi:I precursor ratios, and growth-deposition temperatures reveal that Au NPs generally act as nucleation sites for vapor-solid growth of nanowires. Post-synthesis analyses of 20 nm Au NPs show that the 1:1 ratio of Bi to I within the Au NPs uniquely triggers the vapor-liquid-solid growth of [001]-oriented nanosheets from laterally-ordered [Bi4I4]n chains along the [100] direction. We rationalize the bimodal growth pathways and the morphologically distinct nanostructures based on crystallization habits of the nanostructures, Bi:I ratios in the Au NPs post-synthesis, and orientation of stereochemically active Bi lone pairs between adjacent chains. We anticipate that these pathways are adaptable to other halide- and chalcogen-based 1D vdW nanocrystals with diverse physical and quantum properties.
- 27 July 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDirected Crystallization of a Nanoscale Quasi-1D van der Waals Topological Insulator
Anisotropy often yields unexpected structures and properties in the solid state. In van der Waals (vdW) solids comprised of 1D or quasi-1D (q-1D) chains, anisotropy in both intra- and inter-chain directions results in an abundance of packing motifs and altered physical states. Q-1D vdW solids with topologically protected states are most sought after due to their potential as building blocks for quantum and spintronic devices. Yet, access to such facet- and edge-specific states is limited by the stochastic nature of micromechanical exfoliation. Here, we demonstrate that Bi4I4, a q-1D vdW topological insulator, can be crystallized from the vapor phase either into nanowires or quasi-2D nanosheets. We find that gold nanoparticles (Au NPs) on the growth substrate, in conjunction with the anisotropic structure of Bi4I4, direct the dimensionality of Bi4I4 nanostructures. Systematic variation of Au NP diameters, Bi:I precursor ratios, and growth-deposition temperatures reveal that Au NPs generally act as nucleation sites for vapor-solid growth of nanowires. Post-synthesis analyses of 20 nm Au NPs show that the 1:1 ratio of Bi to I within the Au NPs uniquely triggers the vapor-liquid-solid growth of [001]-oriented nanosheets from laterally-ordered [Bi4I4]n chains along the [100] direction. We rationalize the bimodal growth pathways and the morphologically distinct nanostructures based on crystallization habits of the nanostructures, Bi:I ratios in the Au NPs post-synthesis, and orientation of stereochemically active Bi lone pairs between adjacent chains. We anticipate that these pathways are adaptable to other halide- and chalcogen-based 1D vdW nanocrystals with diverse physical and quantum properties.
- Open Access
- 22 July 2023
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (Supplement) , 348-349
Quickly Switchable Angular and Spatially Resolved Cs-corrected STEM
In this paper, we discuss a methodology to set up quickly switchable angular and spatially resolved Cs-corrected STEM, equipped with a hexapole-type probe corrector. With this method, the convergence semi-angle (Alpha) can be varied or tuned, though with instrument specific upper and lower limits. The method allows us to conduct angular and spatially resolved STEM, by simply changing the CL aperture size, without rigorous geometric aberrations corrections between these two imaging conditions. Although the angle could be either increased or decreased, the smaller angles in the nanobeam regime, where diffraction disks are separated, seem to offer more advantages, particularly when combined with 4D-STEM, or even precession electron diffraction (PED), for example, strain [ 1], orientation mapping [ 2] and differential phase contrast imaging (DPC) [ 3].
- 22 July 2023
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (Supplement) , 348-349
Open AccessQuickly Switchable Angular and Spatially Resolved Cs-corrected STEM
In this paper, we discuss a methodology to set up quickly switchable angular and spatially resolved Cs-corrected STEM, equipped with a hexapole-type probe corrector. With this method, the convergence semi-angle (Alpha) can be varied or tuned, though with instrument specific upper and lower limits. The method allows us to conduct angular and spatially resolved STEM, by simply changing the CL aperture size, without rigorous geometric aberrations corrections between these two imaging conditions. Although the angle could be either increased or decreased, the smaller angles in the nanobeam regime, where diffraction disks are separated, seem to offer more advantages, particularly when combined with 4D-STEM, or even precession electron diffraction (PED), for example, strain [ 1], orientation mapping [ 2] and differential phase contrast imaging (DPC) [ 3].