Griffin Milligan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Griffin Milligan has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Maxx Q. Arguilla
University of California Irvine
14 shared publications - Dmitri Leo Mesoza Cordova
University of California Irvine
11 shared publications - Kaitlyn G. Dold
University of California Irvine
5 shared publications - Kaleolani Ogura
University of California Irvine
5 shared publications - Toshihiro Aoki
University of California Irvine
5 shared publications - Ze-Fan Yao
Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, Center of Soft Matter Science and Engineering College of Chemistry and Molecular Engineering Peking University Beijing China
5 shared publications
Latest Publications
- Open Access
- 4 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Non-covalent inter-chain interactions dictate single chain encapsulation behavior of pnictogen chalcogenides within van der Waals nanotubes
A fully developed understanding of the chemistry that governs interactions in low-dimensional materials is essential to realizing control over their structure, nanoscale morphology, and distinct physical properties. Yet, precisely achieving this in extended solids comprised of highly polarizable main group elements has remained a grand challenge especially in one-dimensional materials that approach the atomic scale. This is owing to the propensity of these heavy main group elements to drive the unusual localization or delocalization behavior of electrons in the system and the formation of competing metastable polytypes due to lone pair effects. In this report, we establish the composition-dependent encapsulation behavior of single chains derived from the low-dimensional Pn2Ch3 pnictogen chalcogenide class (Pn = Sb, Bi; Ch = S, Se, Te) and their strong dependence on the strength of inter-chain non-covalent interactions. Using Sb2S3 and Bi2S3 as model phases, we find that the degree of pnictogen (Pn) bonding is a significant factor in dictating the packing of the constituent quasi-1D chains in the bulk and their growth behavior as single chains upon encapsulation within single-walled carbon nanotubes (SWCNTs). Specifically, chains with weaker inter-chain interactions like Sb2S3 preferentially crystallize under slow-cooled growth parameters that resemble more thermodynamically preferred conditions while chains with stronger inter-chain interactions like Bi2S3 prefer to crystallize and isolate as bulk and only form the elusive encapsulated clustered and crystalline chain domains under rapidly quenched conditions. Systematic Sb/Bi alloying of the precursors revealed the pnictogen-dependence of the chain crystallization where Sb-rich alloys tend to more preferentially crystallize within SWCNTs. In these alloys, Bi preferentially occupies the peripheral three-coordinate site to maximize inter-chain interactions in the bulk, while Sb preferentially occupies the same site when encapsulated within SWCNT and devoid of chains adjacent to it. These results demonstrate that non-covalent bonding concepts in molecular main group systems track in low-dimensional solids that approach the atomic regime when encapsulated within nanotubes, marking a significant step forward in the rational and predictable encapsulation of all-inorganic chains within confined spaces.
- 4 January 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessNon-covalent inter-chain interactions dictate single chain encapsulation behavior of pnictogen chalcogenides within van der Waals nanotubes
A fully developed understanding of the chemistry that governs interactions in low-dimensional materials is essential to realizing control over their structure, nanoscale morphology, and distinct physical properties. Yet, precisely achieving this in extended solids comprised of highly polarizable main group elements has remained a grand challenge especially in one-dimensional materials that approach the atomic scale. This is owing to the propensity of these heavy main group elements to drive the unusual localization or delocalization behavior of electrons in the system and the formation of competing metastable polytypes due to lone pair effects. In this report, we establish the composition-dependent encapsulation behavior of single chains derived from the low-dimensional Pn2Ch3 pnictogen chalcogenide class (Pn = Sb, Bi; Ch = S, Se, Te) and their strong dependence on the strength of inter-chain non-covalent interactions. Using Sb2S3 and Bi2S3 as model phases, we find that the degree of pnictogen (Pn) bonding is a significant factor in dictating the packing of the constituent quasi-1D chains in the bulk and their growth behavior as single chains upon encapsulation within single-walled carbon nanotubes (SWCNTs). Specifically, chains with weaker inter-chain interactions like Sb2S3 preferentially crystallize under slow-cooled growth parameters that resemble more thermodynamically preferred conditions while chains with stronger inter-chain interactions like Bi2S3 prefer to crystallize and isolate as bulk and only form the elusive encapsulated clustered and crystalline chain domains under rapidly quenched conditions. Systematic Sb/Bi alloying of the precursors revealed the pnictogen-dependence of the chain crystallization where Sb-rich alloys tend to more preferentially crystallize within SWCNTs. In these alloys, Bi preferentially occupies the peripheral three-coordinate site to maximize inter-chain interactions in the bulk, while Sb preferentially occupies the same site when encapsulated within SWCNT and devoid of chains adjacent to it. These results demonstrate that non-covalent bonding concepts in molecular main group systems track in low-dimensional solids that approach the atomic regime when encapsulated within nanotubes, marking a significant step forward in the rational and predictable encapsulation of all-inorganic chains within confined spaces.
- Open Access
- 26 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Facet-specific liquid phase exfoliation of an ionic 1D crystal, (NbSe4)3I, into ultrathin nanoribbons
Liquid phase exfoliation (LPE) of emergent materials comprised of weakly bound one-dimensional (1D) and quasi-1D (q-1D) building blocks presents a straightforward route not only for the discovery of confined physical states in 1D, but also for the realization of scalable functional devices. However, compared to the more established routes in two-dimensional (2D) crystals, the nature of LPE in 1D and q-1D crystals presents as a more random process. This distinction arises from the various available interchain directions across several crystallographic facets unique to 1D and q-1D solids, from which the chains can be cleaved apart into a stochastic combination of nanowires, nanoribbons, and nanosheets. Using the 1D ionic phase comprised of ~4.3 Å thin chains, (NbSe4)3I, we demonstrate herein the profound influence of crystal morphology, exposed facets and their degree of wettability, passivation, and surface roughness in directing the LPE behavior of 1D crystals. Through the growth of bulk crystals as long needles with exposed (hk0) facets or as quasi-2D flakes with exposed (00l) facets susceptible to passivation, we show that these two distinct precursor morphologies display divergent behavior—both in solvent preference and quality of resulting nanostructures. Under optimal conditions involving bulk needles and tetrahydrofuran as solvent, we show that the LPE of (NbSe4)3I result in ultrathin nanoribbons with high aspect ratios bearing lengths >5 μm, thicknesses down to 7.2 ± 2.6 nm, and widths of 26.4 ± 10.9 nm. The nanoribbons, solution processable as thin films, retain its native crystal structure and semiconducting character. Moreover, the nanoribbons also manifested pronounced degrees of bending and substrate-driven twisting at the nanoscale while maintaining long-range order. These results highlight a means to understand the fundamental chemical and physical behavior of non-covalently bound 1D solids through the realization of solution-processable 1D nanostructures that also have the potential as components for next-generation devices that approach the atomic scale.
- 26 August 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFacet-specific liquid phase exfoliation of an ionic 1D crystal, (NbSe4)3I, into ultrathin nanoribbons
Liquid phase exfoliation (LPE) of emergent materials comprised of weakly bound one-dimensional (1D) and quasi-1D (q-1D) building blocks presents a straightforward route not only for the discovery of confined physical states in 1D, but also for the realization of scalable functional devices. However, compared to the more established routes in two-dimensional (2D) crystals, the nature of LPE in 1D and q-1D crystals presents as a more random process. This distinction arises from the various available interchain directions across several crystallographic facets unique to 1D and q-1D solids, from which the chains can be cleaved apart into a stochastic combination of nanowires, nanoribbons, and nanosheets. Using the 1D ionic phase comprised of ~4.3 Å thin chains, (NbSe4)3I, we demonstrate herein the profound influence of crystal morphology, exposed facets and their degree of wettability, passivation, and surface roughness in directing the LPE behavior of 1D crystals. Through the growth of bulk crystals as long needles with exposed (hk0) facets or as quasi-2D flakes with exposed (00l) facets susceptible to passivation, we show that these two distinct precursor morphologies display divergent behavior—both in solvent preference and quality of resulting nanostructures. Under optimal conditions involving bulk needles and tetrahydrofuran as solvent, we show that the LPE of (NbSe4)3I result in ultrathin nanoribbons with high aspect ratios bearing lengths >5 μm, thicknesses down to 7.2 ± 2.6 nm, and widths of 26.4 ± 10.9 nm. The nanoribbons, solution processable as thin films, retain its native crystal structure and semiconducting character. Moreover, the nanoribbons also manifested pronounced degrees of bending and substrate-driven twisting at the nanoscale while maintaining long-range order. These results highlight a means to understand the fundamental chemical and physical behavior of non-covalently bound 1D solids through the realization of solution-processable 1D nanostructures that also have the potential as components for next-generation devices that approach the atomic scale.
- Open Access
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Dimensionally resolved nanostructures of an atomically precise and optically active 1D van der Waals helix
Inorganic freestanding helices are rare and are sought-after for their unusual physical states endowed by chirality. To this end, III-VI-VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the instrinsic and size-dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, we present a bottom-up strategy to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, we were able to grow single crystals of 1D nanowires with thicknesess in the 10 to 100 nm range at high temperature conditions, as well as quasi-2D nanoribbons at lower temperatures. We establish the band gap of the nanowires in the UV region and demonstrate the persistence of nonlinear optical behavior originating from the non-centrosymmetric crystal structure of GaSI. Inspired by these results, we probe the effect of chirality on the electronic structure of hypothetical single chains of GaSI from first principles and show the pronounced handedness-dependent and chirality-driven spin polarization at the single helix regime.
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDimensionally resolved nanostructures of an atomically precise and optically active 1D van der Waals helix
Inorganic freestanding helices are rare and are sought-after for their unusual physical states endowed by chirality. To this end, III-VI-VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the instrinsic and size-dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, we present a bottom-up strategy to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, we were able to grow single crystals of 1D nanowires with thicknesess in the 10 to 100 nm range at high temperature conditions, as well as quasi-2D nanoribbons at lower temperatures. We establish the band gap of the nanowires in the UV region and demonstrate the persistence of nonlinear optical behavior originating from the non-centrosymmetric crystal structure of GaSI. Inspired by these results, we probe the effect of chirality on the electronic structure of hypothetical single chains of GaSI from first principles and show the pronounced handedness-dependent and chirality-driven spin polarization at the single helix regime.
- Open Access
- 7 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Bonding-imposed crystallization of 1D nanostructures based on a luminescent and anisotropic 2D van der Waals crystal
Physical states in nanoscale solids are tied to their crystalline order, morphology, and size. However, deterministically accessing different nanocrystal morphologies from a single phase usually involves complex synthetic routes, catalysts, or multi-step lithographic techniques. Here, we demonstrate the catalyst-free synthesis of nanosheets and nanowires based on the luminescent 2D van der Waals (vdW) phase, GaTe, as a model phase that manifests atomic precision and a highly anisotropic quasi-1D substructure. We program the size and morphology of the resulting nanostructures by varying the relative rates of precursor deposition and diffusion, achieving dense, uniform, and widespread growth. Ultrathin nanowires resulting from this synthesis exhibit strikingly enhanced low-temperature luminescence with narrow near-infrared (NIR) emission bandwidths. These spectral characteristics arise from defect-bound states confined within a nanowire morphology that acts as a deep sub-wavelength optical cavity, making them suitable as optical emitters with small footprints either as stand-alone structures or coupled with other vdW crystals.
- 7 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessBonding-imposed crystallization of 1D nanostructures based on a luminescent and anisotropic 2D van der Waals crystal
Physical states in nanoscale solids are tied to their crystalline order, morphology, and size. However, deterministically accessing different nanocrystal morphologies from a single phase usually involves complex synthetic routes, catalysts, or multi-step lithographic techniques. Here, we demonstrate the catalyst-free synthesis of nanosheets and nanowires based on the luminescent 2D van der Waals (vdW) phase, GaTe, as a model phase that manifests atomic precision and a highly anisotropic quasi-1D substructure. We program the size and morphology of the resulting nanostructures by varying the relative rates of precursor deposition and diffusion, achieving dense, uniform, and widespread growth. Ultrathin nanowires resulting from this synthesis exhibit strikingly enhanced low-temperature luminescence with narrow near-infrared (NIR) emission bandwidths. These spectral characteristics arise from defect-bound states confined within a nanowire morphology that acts as a deep sub-wavelength optical cavity, making them suitable as optical emitters with small footprints either as stand-alone structures or coupled with other vdW crystals.
- Open Access
- 21 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Triel-defined helicity in one-dimensional III-VI-VII van der Waals crystals
Inorganic extended lattice solids that bear complex helical motifs manifest unusual physical and quantum states that arise due to their non-centrosymmetric or chiral nature. However, the systematic understanding of how elemental composition influences the structure and physical properties in helical inorganic crystals have been precluded by the rarity of these materials and the lack of modular phases that display such motifs. Here, we report the synthesis of AlSeI single crystals, the first aluminum-containing helical crystal in the III-VI-VII 1D van der Waals class. AlSeI completes the experimentally accessible triel series in the helical seleno-iodides alongside InSeI and GaSeI. Using the Al, Ga, and In triel series in this seleno-iodide class, we experimentally demonstrate the evolution of the local quasi-tetrahedral building unit geometry, chain packing, helical parameters, and band gaps based primarily on the identity of the triel atom. Our results underscore the chemical modularity of these phases, the broad range of helical parameters and the spectrum of electronic states from the visible to the ultraviolet range in this emergent class of 1D, exfoliable, and helical extended lattice solids.
- 21 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTriel-defined helicity in one-dimensional III-VI-VII van der Waals crystals
Inorganic extended lattice solids that bear complex helical motifs manifest unusual physical and quantum states that arise due to their non-centrosymmetric or chiral nature. However, the systematic understanding of how elemental composition influences the structure and physical properties in helical inorganic crystals have been precluded by the rarity of these materials and the lack of modular phases that display such motifs. Here, we report the synthesis of AlSeI single crystals, the first aluminum-containing helical crystal in the III-VI-VII 1D van der Waals class. AlSeI completes the experimentally accessible triel series in the helical seleno-iodides alongside InSeI and GaSeI. Using the Al, Ga, and In triel series in this seleno-iodide class, we experimentally demonstrate the evolution of the local quasi-tetrahedral building unit geometry, chain packing, helical parameters, and band gaps based primarily on the identity of the triel atom. Our results underscore the chemical modularity of these phases, the broad range of helical parameters and the spectrum of electronic states from the visible to the ultraviolet range in this emergent class of 1D, exfoliable, and helical extended lattice solids.
- Open Access
- 17 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Persistent Metallicity and Systematic Vacancies in Tellurium-based Quasi-One-Dimensional Chevrel-Type Single Crystals
The coexistence of prominent structural anisotropies with low-dimensional structural units that approach the atomic scale has endowed numerous emergent materials with unusual and, often, sought-after physical properties. Recently, the highly modular class of ternary transition metal Chevrel-type chalcogenides, consisting of infinite quasi-one-dimensional (q-1D) [Mo3Q3]n– (Q = S, Se, or Te) columnar chains with sub-nanometer-thicknesses intercalated with A+ (A = alkali or rare metals) cations, has garnered renewed interest owing to their potential to manifest q-1D metallic character, superconducting behavior, and predicted 1D Dirac Fermionic states. However, because these q-1D crystals tend to form micron-scale polycrystals, it has often been difficult to thoroughly investigate their structure and chemistry, as well as their sought-after emergent properties. In this study, we demonstrate the vapor-phase-assisted synthesis of sizeable and well-defined single crystals of a tellurium-based q-1D Chevrel-like crystal, In2–δMo6Te6, facilitating detailed investigations of its crystal structure and electronic properties. These crystals showed distinct signatures of structural 1D anisotropy and a persistent metallic character down to 1.7 K, despite the prevailing theory that q-1D metals undergo Peierls distortion. Intriguingly, we uniquely found from the combination of experimental single crystal refinements and first-principles calculations that the distinct structure, radius ratios, and composition intrinsically impose a thermodynamically favored fractional vacancy in roughly 1/8 of the cationic In sites. These results highlight the potential for chemical, structural, and physical property modulation in this class of metallic q-1D crystals that display suitable electronic states for next-generation functional devices.
- 17 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPersistent Metallicity and Systematic Vacancies in Tellurium-based Quasi-One-Dimensional Chevrel-Type Single Crystals
The coexistence of prominent structural anisotropies with low-dimensional structural units that approach the atomic scale has endowed numerous emergent materials with unusual and, often, sought-after physical properties. Recently, the highly modular class of ternary transition metal Chevrel-type chalcogenides, consisting of infinite quasi-one-dimensional (q-1D) [Mo3Q3]n– (Q = S, Se, or Te) columnar chains with sub-nanometer-thicknesses intercalated with A+ (A = alkali or rare metals) cations, has garnered renewed interest owing to their potential to manifest q-1D metallic character, superconducting behavior, and predicted 1D Dirac Fermionic states. However, because these q-1D crystals tend to form micron-scale polycrystals, it has often been difficult to thoroughly investigate their structure and chemistry, as well as their sought-after emergent properties. In this study, we demonstrate the vapor-phase-assisted synthesis of sizeable and well-defined single crystals of a tellurium-based q-1D Chevrel-like crystal, In2–δMo6Te6, facilitating detailed investigations of its crystal structure and electronic properties. These crystals showed distinct signatures of structural 1D anisotropy and a persistent metallic character down to 1.7 K, despite the prevailing theory that q-1D metals undergo Peierls distortion. Intriguingly, we uniquely found from the combination of experimental single crystal refinements and first-principles calculations that the distinct structure, radius ratios, and composition intrinsically impose a thermodynamically favored fractional vacancy in roughly 1/8 of the cationic In sites. These results highlight the potential for chemical, structural, and physical property modulation in this class of metallic q-1D crystals that display suitable electronic states for next-generation functional devices.
- Open Access
- 28 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Precision synthesis of a one-dimensional single chain polymorph of Sb2Te3 within single-walled carbon nanotubes
The discovery and synthesis of atomically precise low-dimensional inorganic solids has led to numerous unusual structural motifs and nascent physical properties. However, access to low-dimensional van der Waals (vdW)-bound analogues of bulk crystals is often limited by chemical considerations arising from structural factors like atomic radii, bonding or coordination, and electronegativity. Using single-walled carbon nanotubes (SWCNTs) as confinement templates, we demonstrate the synthesis of a new 0.67 eV gap quasi-one-dimensional (q-1D) chain polymorph of Sb2Te3 ([Sb4Te6]n) that is structurally and electronically distinct from its 2D counterpart. We found that the q-1D chain polymorph has both three- and five-coordinate Sb atoms covalently bonded to Te and is thermodynamically stabilized by the electrostatic interaction between the encapsulated chain and the model SWCNT. These complementary results demonstrate the synthetic advantage of vdW nanotube confinement in the discovery of low-dimensional polytypes with drastically altered physical properties and potential applications in energy conversion processes.
- 28 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPrecision synthesis of a one-dimensional single chain polymorph of Sb2Te3 within single-walled carbon nanotubes
The discovery and synthesis of atomically precise low-dimensional inorganic solids has led to numerous unusual structural motifs and nascent physical properties. However, access to low-dimensional van der Waals (vdW)-bound analogues of bulk crystals is often limited by chemical considerations arising from structural factors like atomic radii, bonding or coordination, and electronegativity. Using single-walled carbon nanotubes (SWCNTs) as confinement templates, we demonstrate the synthesis of a new 0.67 eV gap quasi-one-dimensional (q-1D) chain polymorph of Sb2Te3 ([Sb4Te6]n) that is structurally and electronically distinct from its 2D counterpart. We found that the q-1D chain polymorph has both three- and five-coordinate Sb atoms covalently bonded to Te and is thermodynamically stabilized by the electrostatic interaction between the encapsulated chain and the model SWCNT. These complementary results demonstrate the synthetic advantage of vdW nanotube confinement in the discovery of low-dimensional polytypes with drastically altered physical properties and potential applications in energy conversion processes.
- Open Access
- 17 May 2024
- Published by American Chemical Society (ACS) in ChemRxiv
GaSI: A wide gap non-centrosymmetric helical crystal
The complex non-centrosymmetric and chiral nature of helical structures endow materials that possess such motifs with unusual properties. However, despite their ubiquity in biological and organic systems, there is a severe lack of inorganic crystals that display helicity in extended lattices where these unusual properties are expected to be most pronounced. Here, we report a new inorganic helical structure, gallium sulfur iodide (GaSI), within the exfoliable class of III-VI-VII (1:1:1) one-dimensional (1D) van der Waals (vdW) crystals. Through detailed structural analyses, including single crystal X-ray diffraction and electron microscopy, we elucidate the apparent non-crystallographic screw axis and the first example of an atomic scale helical structure bearing a “squircular” cross-section in GaSI. Crystallizing in the non-centrosymmetric P-4 space group, we found that GaSI crystals exhibit pronounced second harmonic generation. From diffuse reflectance spectroscopy, GaSI displays a sizeable band gap of 3.69 eV, owing to weaker orbital overlap between conduction and the valence bands based on density functional theory calculations. These results position GaSI as a promising exfoliable non-linear optical material across a broad optical window.
- 17 May 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessGaSI: A wide gap non-centrosymmetric helical crystal
The complex non-centrosymmetric and chiral nature of helical structures endow materials that possess such motifs with unusual properties. However, despite their ubiquity in biological and organic systems, there is a severe lack of inorganic crystals that display helicity in extended lattices where these unusual properties are expected to be most pronounced. Here, we report a new inorganic helical structure, gallium sulfur iodide (GaSI), within the exfoliable class of III-VI-VII (1:1:1) one-dimensional (1D) van der Waals (vdW) crystals. Through detailed structural analyses, including single crystal X-ray diffraction and electron microscopy, we elucidate the apparent non-crystallographic screw axis and the first example of an atomic scale helical structure bearing a “squircular” cross-section in GaSI. Crystallizing in the non-centrosymmetric P-4 space group, we found that GaSI crystals exhibit pronounced second harmonic generation. From diffuse reflectance spectroscopy, GaSI displays a sizeable band gap of 3.69 eV, owing to weaker orbital overlap between conduction and the valence bands based on density functional theory calculations. These results position GaSI as a promising exfoliable non-linear optical material across a broad optical window.
- Open Access
- 16 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Bonding-Directed Crystallization of Ultra-Long One-Dimensional NbS3 van der Waals Nanowires
The rediscovery of one-dimensional (1D) and quasi-1D (q-1D) van der Waals (vdW) crystals ushered the realization of nascent physical properties in 1D that are suitable for applications including photonics, electronics, and sensing. However, despite renewed interest in the creation and understanding of the physical properties of 1D and q-1D vdW crystals, the lack of accessible synthetic pathways for growing well-defined nanostructures that extend across several length scales remains. Using the highly anisotropic 1D vdW NbS3-I crystal as a model phase, we present a catalyst-free and bottom-up synthetic approach to access ultra-long nanowires, with lengths reaching up to 7.9 mm and with uniform thicknesses ranging from 13 to 190 nm between individual nanowires. Control over the synthetic parameters enabled the modulation of intra- and inter-chain growth modalities to selectively yield 1D nanowires or quasi-2D nanoribbons. Comparative synthetic and density functional theory (DFT) studies with a closely related non-dimerized phase, ZrS3, show that the unusual preferential growth along 1D can be correlated to the strongly anisotropic bonding and dimeric nature of NbS3 Type-I. These results, owing to the ubiquity of dimerization in Peierls-distorted 1D crystals, will open opportunities to grow ultra-long nanowires for high-fidelity optical and electronic devices approaching the sub-nanoscale regime.
- 16 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessBonding-Directed Crystallization of Ultra-Long One-Dimensional NbS3 van der Waals Nanowires
The rediscovery of one-dimensional (1D) and quasi-1D (q-1D) van der Waals (vdW) crystals ushered the realization of nascent physical properties in 1D that are suitable for applications including photonics, electronics, and sensing. However, despite renewed interest in the creation and understanding of the physical properties of 1D and q-1D vdW crystals, the lack of accessible synthetic pathways for growing well-defined nanostructures that extend across several length scales remains. Using the highly anisotropic 1D vdW NbS3-I crystal as a model phase, we present a catalyst-free and bottom-up synthetic approach to access ultra-long nanowires, with lengths reaching up to 7.9 mm and with uniform thicknesses ranging from 13 to 190 nm between individual nanowires. Control over the synthetic parameters enabled the modulation of intra- and inter-chain growth modalities to selectively yield 1D nanowires or quasi-2D nanoribbons. Comparative synthetic and density functional theory (DFT) studies with a closely related non-dimerized phase, ZrS3, show that the unusual preferential growth along 1D can be correlated to the strongly anisotropic bonding and dimeric nature of NbS3 Type-I. These results, owing to the ubiquity of dimerization in Peierls-distorted 1D crystals, will open opportunities to grow ultra-long nanowires for high-fidelity optical and electronic devices approaching the sub-nanoscale regime.
- Open Access
- 4 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Encapsulation of Crystalline and Amorphous Sb2S3 within Carbon and Boron Nitride Nanotubes
The recent rediscovery of 1D and quasi-1D (q-1D) van der Waals (vdW) crystals has laid foundation to the realization of emergent electronic, optical, and quantum-confined physical phenomena in both bulk and at the nanoscale. Of these, the highly anisotropic q-1D vdW crystal structure and the visible-light optical/optoelectronic properties of antimony trisulfide (Sb2S3) have led to its widespread consideration as a promising building block for photovoltaic and non-volatile phase change devices. However, while these applications will greatly benefit from well-defined and sub-nanometer-thick q-1D structures, little has been known about feasible synthetic routes that can access single covalent chains of Sb2S3. In this work, we explore how encapsulation in single or multi-walled carbon nanotubes (SWCNTs or MWCNTs) and visible-range transparent boron nitride nanotubes (BNNTs) influences the growth and phase of Sb2S3 nanostructures. We demonstrate that nanotubes with smaller diameters had a more pronounced effect in the crystallographic growth direction and orientation of Sb2S3 nanostructures, promoting the crystallization of the guest structures along the long-axis [010]-direction. As such, we were able to reliably access well-ordered few- to single covalent chains of Sb2S3 when synthesized within defect-free SWCNTs with sub-2 nm inner diameters. Intriguingly, we found that the degree of crystalline order of Sb2S3 nanostructures was strongly influenced by the presence of defects and discontinuities along the Sb2S3-nanotube interface. We show that amorphous nanowire domains of Sb2S3 form around defect sites in larger, multi-walled nanotubes that manifest inner wall defects and discontinuities, suggesting a means to manipulate the crystallization dynamics of confined sub-10 nm-thick Sb2S3 nanostructures within nanotubes. Lastly, we show that ultrathin, predominantly amorphous, Sb2S3 encapsulated within BNNTs can impart functionality onto the host nanotube, showing a ~30-fold increase in electrical conductivity and displayed photocurrent generation compared to empty BNNTs in pressed pellets. Altogether, our results serve to solidify the understanding of how q-1D vdW pnictogen chalcogenides crystallize within confined synthetic platforms and are a step towards realizing functional materials from ensembles of encapsulated heterostructures.
- 4 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEncapsulation of Crystalline and Amorphous Sb2S3 within Carbon and Boron Nitride Nanotubes
The recent rediscovery of 1D and quasi-1D (q-1D) van der Waals (vdW) crystals has laid foundation to the realization of emergent electronic, optical, and quantum-confined physical phenomena in both bulk and at the nanoscale. Of these, the highly anisotropic q-1D vdW crystal structure and the visible-light optical/optoelectronic properties of antimony trisulfide (Sb2S3) have led to its widespread consideration as a promising building block for photovoltaic and non-volatile phase change devices. However, while these applications will greatly benefit from well-defined and sub-nanometer-thick q-1D structures, little has been known about feasible synthetic routes that can access single covalent chains of Sb2S3. In this work, we explore how encapsulation in single or multi-walled carbon nanotubes (SWCNTs or MWCNTs) and visible-range transparent boron nitride nanotubes (BNNTs) influences the growth and phase of Sb2S3 nanostructures. We demonstrate that nanotubes with smaller diameters had a more pronounced effect in the crystallographic growth direction and orientation of Sb2S3 nanostructures, promoting the crystallization of the guest structures along the long-axis [010]-direction. As such, we were able to reliably access well-ordered few- to single covalent chains of Sb2S3 when synthesized within defect-free SWCNTs with sub-2 nm inner diameters. Intriguingly, we found that the degree of crystalline order of Sb2S3 nanostructures was strongly influenced by the presence of defects and discontinuities along the Sb2S3-nanotube interface. We show that amorphous nanowire domains of Sb2S3 form around defect sites in larger, multi-walled nanotubes that manifest inner wall defects and discontinuities, suggesting a means to manipulate the crystallization dynamics of confined sub-10 nm-thick Sb2S3 nanostructures within nanotubes. Lastly, we show that ultrathin, predominantly amorphous, Sb2S3 encapsulated within BNNTs can impart functionality onto the host nanotube, showing a ~30-fold increase in electrical conductivity and displayed photocurrent generation compared to empty BNNTs in pressed pellets. Altogether, our results serve to solidify the understanding of how q-1D vdW pnictogen chalcogenides crystallize within confined synthetic platforms and are a step towards realizing functional materials from ensembles of encapsulated heterostructures.