Kaleolani Ogura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kaleolani Ogura has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Griffin Milligan
University of California Irvine
5 shared publications - Maxx Q. Arguilla
University of California Irvine
5 shared publications - Dmitri Leo Mesoza Cordova
University of California Irvine
4 shared publications - Elizabeth M. Y. Lee
University of California Irvine
3 shared publications - Toshihiro Aoki
University of California Irvine
3 shared publications - Diana Lopez
University of California Irvine
2 shared publications
Latest Publications
- Open Access
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Dimensionally resolved nanostructures of an atomically precise and optically active 1D van der Waals helix
Inorganic freestanding helices are rare and are sought-after for their unusual physical states endowed by chirality. To this end, III-VI-VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the instrinsic and size-dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, we present a bottom-up strategy to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, we were able to grow single crystals of 1D nanowires with thicknesess in the 10 to 100 nm range at high temperature conditions, as well as quasi-2D nanoribbons at lower temperatures. We establish the band gap of the nanowires in the UV region and demonstrate the persistence of nonlinear optical behavior originating from the non-centrosymmetric crystal structure of GaSI. Inspired by these results, we probe the effect of chirality on the electronic structure of hypothetical single chains of GaSI from first principles and show the pronounced handedness-dependent and chirality-driven spin polarization at the single helix regime.
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDimensionally resolved nanostructures of an atomically precise and optically active 1D van der Waals helix
Inorganic freestanding helices are rare and are sought-after for their unusual physical states endowed by chirality. To this end, III-VI-VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the instrinsic and size-dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, we present a bottom-up strategy to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, we were able to grow single crystals of 1D nanowires with thicknesess in the 10 to 100 nm range at high temperature conditions, as well as quasi-2D nanoribbons at lower temperatures. We establish the band gap of the nanowires in the UV region and demonstrate the persistence of nonlinear optical behavior originating from the non-centrosymmetric crystal structure of GaSI. Inspired by these results, we probe the effect of chirality on the electronic structure of hypothetical single chains of GaSI from first principles and show the pronounced handedness-dependent and chirality-driven spin polarization at the single helix regime.
- Open Access
- 17 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Persistent Metallicity and Systematic Vacancies in Tellurium-based Quasi-One-Dimensional Chevrel-Type Single Crystals
The coexistence of prominent structural anisotropies with low-dimensional structural units that approach the atomic scale has endowed numerous emergent materials with unusual and, often, sought-after physical properties. Recently, the highly modular class of ternary transition metal Chevrel-type chalcogenides, consisting of infinite quasi-one-dimensional (q-1D) [Mo3Q3]n– (Q = S, Se, or Te) columnar chains with sub-nanometer-thicknesses intercalated with A+ (A = alkali or rare metals) cations, has garnered renewed interest owing to their potential to manifest q-1D metallic character, superconducting behavior, and predicted 1D Dirac Fermionic states. However, because these q-1D crystals tend to form micron-scale polycrystals, it has often been difficult to thoroughly investigate their structure and chemistry, as well as their sought-after emergent properties. In this study, we demonstrate the vapor-phase-assisted synthesis of sizeable and well-defined single crystals of a tellurium-based q-1D Chevrel-like crystal, In2–δMo6Te6, facilitating detailed investigations of its crystal structure and electronic properties. These crystals showed distinct signatures of structural 1D anisotropy and a persistent metallic character down to 1.7 K, despite the prevailing theory that q-1D metals undergo Peierls distortion. Intriguingly, we uniquely found from the combination of experimental single crystal refinements and first-principles calculations that the distinct structure, radius ratios, and composition intrinsically impose a thermodynamically favored fractional vacancy in roughly 1/8 of the cationic In sites. These results highlight the potential for chemical, structural, and physical property modulation in this class of metallic q-1D crystals that display suitable electronic states for next-generation functional devices.
- 17 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPersistent Metallicity and Systematic Vacancies in Tellurium-based Quasi-One-Dimensional Chevrel-Type Single Crystals
The coexistence of prominent structural anisotropies with low-dimensional structural units that approach the atomic scale has endowed numerous emergent materials with unusual and, often, sought-after physical properties. Recently, the highly modular class of ternary transition metal Chevrel-type chalcogenides, consisting of infinite quasi-one-dimensional (q-1D) [Mo3Q3]n– (Q = S, Se, or Te) columnar chains with sub-nanometer-thicknesses intercalated with A+ (A = alkali or rare metals) cations, has garnered renewed interest owing to their potential to manifest q-1D metallic character, superconducting behavior, and predicted 1D Dirac Fermionic states. However, because these q-1D crystals tend to form micron-scale polycrystals, it has often been difficult to thoroughly investigate their structure and chemistry, as well as their sought-after emergent properties. In this study, we demonstrate the vapor-phase-assisted synthesis of sizeable and well-defined single crystals of a tellurium-based q-1D Chevrel-like crystal, In2–δMo6Te6, facilitating detailed investigations of its crystal structure and electronic properties. These crystals showed distinct signatures of structural 1D anisotropy and a persistent metallic character down to 1.7 K, despite the prevailing theory that q-1D metals undergo Peierls distortion. Intriguingly, we uniquely found from the combination of experimental single crystal refinements and first-principles calculations that the distinct structure, radius ratios, and composition intrinsically impose a thermodynamically favored fractional vacancy in roughly 1/8 of the cationic In sites. These results highlight the potential for chemical, structural, and physical property modulation in this class of metallic q-1D crystals that display suitable electronic states for next-generation functional devices.
- Open Access
- 28 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Precision synthesis of a one-dimensional single chain polymorph of Sb2Te3 within single-walled carbon nanotubes
The discovery and synthesis of atomically precise low-dimensional inorganic solids has led to numerous unusual structural motifs and nascent physical properties. However, access to low-dimensional van der Waals (vdW)-bound analogues of bulk crystals is often limited by chemical considerations arising from structural factors like atomic radii, bonding or coordination, and electronegativity. Using single-walled carbon nanotubes (SWCNTs) as confinement templates, we demonstrate the synthesis of a new 0.67 eV gap quasi-one-dimensional (q-1D) chain polymorph of Sb2Te3 ([Sb4Te6]n) that is structurally and electronically distinct from its 2D counterpart. We found that the q-1D chain polymorph has both three- and five-coordinate Sb atoms covalently bonded to Te and is thermodynamically stabilized by the electrostatic interaction between the encapsulated chain and the model SWCNT. These complementary results demonstrate the synthetic advantage of vdW nanotube confinement in the discovery of low-dimensional polytypes with drastically altered physical properties and potential applications in energy conversion processes.
- 28 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPrecision synthesis of a one-dimensional single chain polymorph of Sb2Te3 within single-walled carbon nanotubes
The discovery and synthesis of atomically precise low-dimensional inorganic solids has led to numerous unusual structural motifs and nascent physical properties. However, access to low-dimensional van der Waals (vdW)-bound analogues of bulk crystals is often limited by chemical considerations arising from structural factors like atomic radii, bonding or coordination, and electronegativity. Using single-walled carbon nanotubes (SWCNTs) as confinement templates, we demonstrate the synthesis of a new 0.67 eV gap quasi-one-dimensional (q-1D) chain polymorph of Sb2Te3 ([Sb4Te6]n) that is structurally and electronically distinct from its 2D counterpart. We found that the q-1D chain polymorph has both three- and five-coordinate Sb atoms covalently bonded to Te and is thermodynamically stabilized by the electrostatic interaction between the encapsulated chain and the model SWCNT. These complementary results demonstrate the synthetic advantage of vdW nanotube confinement in the discovery of low-dimensional polytypes with drastically altered physical properties and potential applications in energy conversion processes.
- Open Access
- 16 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Bonding-Directed Crystallization of Ultra-Long One-Dimensional NbS3 van der Waals Nanowires
The rediscovery of one-dimensional (1D) and quasi-1D (q-1D) van der Waals (vdW) crystals ushered the realization of nascent physical properties in 1D that are suitable for applications including photonics, electronics, and sensing. However, despite renewed interest in the creation and understanding of the physical properties of 1D and q-1D vdW crystals, the lack of accessible synthetic pathways for growing well-defined nanostructures that extend across several length scales remains. Using the highly anisotropic 1D vdW NbS3-I crystal as a model phase, we present a catalyst-free and bottom-up synthetic approach to access ultra-long nanowires, with lengths reaching up to 7.9 mm and with uniform thicknesses ranging from 13 to 190 nm between individual nanowires. Control over the synthetic parameters enabled the modulation of intra- and inter-chain growth modalities to selectively yield 1D nanowires or quasi-2D nanoribbons. Comparative synthetic and density functional theory (DFT) studies with a closely related non-dimerized phase, ZrS3, show that the unusual preferential growth along 1D can be correlated to the strongly anisotropic bonding and dimeric nature of NbS3 Type-I. These results, owing to the ubiquity of dimerization in Peierls-distorted 1D crystals, will open opportunities to grow ultra-long nanowires for high-fidelity optical and electronic devices approaching the sub-nanoscale regime.
- 16 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessBonding-Directed Crystallization of Ultra-Long One-Dimensional NbS3 van der Waals Nanowires
The rediscovery of one-dimensional (1D) and quasi-1D (q-1D) van der Waals (vdW) crystals ushered the realization of nascent physical properties in 1D that are suitable for applications including photonics, electronics, and sensing. However, despite renewed interest in the creation and understanding of the physical properties of 1D and q-1D vdW crystals, the lack of accessible synthetic pathways for growing well-defined nanostructures that extend across several length scales remains. Using the highly anisotropic 1D vdW NbS3-I crystal as a model phase, we present a catalyst-free and bottom-up synthetic approach to access ultra-long nanowires, with lengths reaching up to 7.9 mm and with uniform thicknesses ranging from 13 to 190 nm between individual nanowires. Control over the synthetic parameters enabled the modulation of intra- and inter-chain growth modalities to selectively yield 1D nanowires or quasi-2D nanoribbons. Comparative synthetic and density functional theory (DFT) studies with a closely related non-dimerized phase, ZrS3, show that the unusual preferential growth along 1D can be correlated to the strongly anisotropic bonding and dimeric nature of NbS3 Type-I. These results, owing to the ubiquity of dimerization in Peierls-distorted 1D crystals, will open opportunities to grow ultra-long nanowires for high-fidelity optical and electronic devices approaching the sub-nanoscale regime.
- Open Access
- 21 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Functionalization and Structural Evolution of Conducting Quasi-One-Dimensional Chevrel-Type Telluride Nanocrystals
Interfacing organic molecular groups with well-defined inorganic lattices, especially in low dimensions, enables synthetic routes for the rational manipulation of both their local or extended lattice structures and physical properties. While appreciably studied in two-dimensional systems, the influence of surface organic substituents on many known and emergent one-dimensional (1D) and quasi-1D (q-1D) crystals has remained underexplored. Herein, we demonstrate the surface functionalization of bulk and nanoscale Chevrel-like q-1D ionic crystals using In2Mo6Te6, a predicted q-1D Dirac semimetal, as the model phase. Using a series of alkyl ammonium (—NR4+; R = H, methyl, ethyl, butyl, and octyl) substituents with varying chain lengths, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction with longer chain substituents. Additionally, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction as the alkyl chain substituents become longer using a combination of powder X-ray diffraction and Raman experiments. Beyond the structural modulation that the substituted groups can impose on the lattice, we also found that the substitution of ammonium-based groups on the surface of the nanocrystals resulted in selective suspension in aqueous (NH4+-functionalized) or organic solvents (NOc4+-functionalized), imparted fluorescent character (Rhodamine B-functionalized), and modulated the electrical conductivity of the nanocrystal ensemble. Altogether, our results underscore the potential of organic-inorganic interfacing strategies to tune the structural and physical properties of rediscovered Chevrel-type q-1D ionic solids and open opportunities for the development of surface-addressable building blocks for hybrid electronic and optoelectronic devices at the nanoscale.
- 21 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFunctionalization and Structural Evolution of Conducting Quasi-One-Dimensional Chevrel-Type Telluride Nanocrystals
Interfacing organic molecular groups with well-defined inorganic lattices, especially in low dimensions, enables synthetic routes for the rational manipulation of both their local or extended lattice structures and physical properties. While appreciably studied in two-dimensional systems, the influence of surface organic substituents on many known and emergent one-dimensional (1D) and quasi-1D (q-1D) crystals has remained underexplored. Herein, we demonstrate the surface functionalization of bulk and nanoscale Chevrel-like q-1D ionic crystals using In2Mo6Te6, a predicted q-1D Dirac semimetal, as the model phase. Using a series of alkyl ammonium (—NR4+; R = H, methyl, ethyl, butyl, and octyl) substituents with varying chain lengths, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction with longer chain substituents. Additionally, we demonstrate the systematic expansion of the intra-chain c-axis direction and the contraction of the inter-chain a/b-axis direction as the alkyl chain substituents become longer using a combination of powder X-ray diffraction and Raman experiments. Beyond the structural modulation that the substituted groups can impose on the lattice, we also found that the substitution of ammonium-based groups on the surface of the nanocrystals resulted in selective suspension in aqueous (NH4+-functionalized) or organic solvents (NOc4+-functionalized), imparted fluorescent character (Rhodamine B-functionalized), and modulated the electrical conductivity of the nanocrystal ensemble. Altogether, our results underscore the potential of organic-inorganic interfacing strategies to tune the structural and physical properties of rediscovered Chevrel-type q-1D ionic solids and open opportunities for the development of surface-addressable building blocks for hybrid electronic and optoelectronic devices at the nanoscale.