Zhipeng Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhipeng Tian has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jingtao Dong
Anhui Province Key Laboratory of Measuring Theory and Precision Instrument, School of Instrument Science and Optoelectronics Engineering, Hefei University of Technology 1 , Hefei 230009, Anhui, China
2 shared publications - Ang Wu
Anhui Province Key Laboratory of Measuring Theory and Precision Instrument, School of Instrument Science and Optoelectronics Engineering, Hefei University of Technology, Hefei, Anhui, China
1 shared publication - Enxi Zhao
Anhui Province Key Laboratory of Measuring Theory and Precision Instrument, School of Instrument Science and Optoelectronics Engineering, Hefei University of Technology , Hefei 230009, Anhui, China
1 shared publication - Liyuan Xie
Anhui Province Key Laboratory of Measuring Theory and Precision Instrument, School of Instrument Science and Optoelectronics Engineering, Hefei University of Technology , Hefei 230009, Anhui, China
1 shared publication - Lu Yuan
Eco-Environmental Monitoring and Scientific Research Center, Yellow River Basin Ecology and Environment Administration, Zhengzhou 450004, China
1 shared publication - Rongsheng Lu
School of Instrumental Science and Optoelectronic Engineering, Hefei University of Technology, Hefei, China
1 shared publication
Latest Publications
- 14 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Stabilizing Orthogonal Phase Bias of Mach–Zehnder Interferometer via Dual-Wavelength Feedback and Geometric Phase Shifter
Stabilizing orthogonal phase bias is highly required in Mach-Zehnder interferometer (MZI) to achieve sufficiently high sensitivity and long-term stability. To this end, we demonstrated a stabilized MZI using dual-wavelength feedback and a geometric phase shifter (GPS). The two beams at the wavelengths of 632.8 nm and 532 nm, respectively, propagate almost in the common path in the MZI, so that the beams have the same sensitivity to ambient disturbance. The beam at 632.8 nm is used to sense the displacement, and the other one at 532 nm is used for feedback and orthogonal phase bias stabilization. The phase shift error of the two separate wavelengths can be compensated by a GPS consisting of a rotating half waveplate sandwiched between two static quarter waveplates. The results of the proof-of-concept experiment showed that the phase shift error between 632.8 nm and 532 nm was reduced to within (-0.08π, 0.09π) by the GPS, and can be further reduced by two orders of magnitude if more appropriate wavelengths or waveplates were selected. The stabilized MZI showed a displacement resolution of 5 nm, and was proved to be effective in suppressing the low-frequency noise less than 10 Hz.
- 14 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Stabilizing Orthogonal Phase Bias of Mach–Zehnder Interferometer via Dual-Wavelength Feedback and Geometric Phase Shifter
Stabilizing orthogonal phase bias is highly required in Mach-Zehnder interferometer (MZI) to achieve sufficiently high sensitivity and long-term stability. To this end, we demonstrated a stabilized MZI using dual-wavelength feedback and a geometric phase shifter (GPS). The two beams at the wavelengths of 632.8 nm and 532 nm, respectively, propagate almost in the common path in the MZI, so that the beams have the same sensitivity to ambient disturbance. The beam at 632.8 nm is used to sense the displacement, and the other one at 532 nm is used for feedback and orthogonal phase bias stabilization. The phase shift error of the two separate wavelengths can be compensated by a GPS consisting of a rotating half waveplate sandwiched between two static quarter waveplates. The results of the proof-of-concept experiment showed that the phase shift error between 632.8 nm and 532 nm was reduced to within (-0.08π, 0.09π) by the GPS, and can be further reduced by two orders of magnitude if more appropriate wavelengths or waveplates were selected. The stabilized MZI showed a displacement resolution of 5 nm, and was proved to be effective in suppressing the low-frequency noise less than 10 Hz.
- Open Access
- 1 August 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (8)
Carrier optical vortex interferometer using segmentation demodulation method for dynamic measurement of axisymmetric surface deformation
The dynamic measurement of surface deformation with an axisymmetric profile at nanometer- to micrometer-scale is of great interest in understanding micromechanical and thermophysical dynamics. We propose a carrier optical vortex interferometer (COVI) to measure such surface deformation dynamically by segmentation demodulation of the petal-like interferogram that is produced by the coaxial superposition of conjugated p-radial order Laguerre–Gaussian beams. Specifically, a rotating chopper placed at the exit of the interferometer introduces a carrier frequency in the absence of surface deformation. A camera placed behind the chopper uses a multi-ring segmentation detection scheme to produce a Doppler shift relative to the carrier frequency at the radius of each ring in the presence of axisymmetric surface deformation. Locating the Doppler shifts gives the surface deformation velocities at those radii. Thus, the dynamic surface deformation profile can be obtained by integrating the velocities over time. We reveal the basic principles of the carrier frequency and the Doppler shifts in the COVI theoretically. As a proof-of-concept, an external force-induced axisymmetric mechanical surface deformation is measured dynamically to demonstrate the validity of the COVI. The results show that the measurement error of the surface deformation velocity is within (−2.1, 1.1 nm/s) for the velocity ranging from 20 to 86 nm/s. The lower limit of the measurable velocity can reach 20 nm/s. The measurement error of the surface deformation profile is less than 2.5 nm for the amplitude of the surface deformation of 500 nm.
- 1 August 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (8)
Open AccessCarrier optical vortex interferometer using segmentation demodulation method for dynamic measurement of axisymmetric surface deformation
The dynamic measurement of surface deformation with an axisymmetric profile at nanometer- to micrometer-scale is of great interest in understanding micromechanical and thermophysical dynamics. We propose a carrier optical vortex interferometer (COVI) to measure such surface deformation dynamically by segmentation demodulation of the petal-like interferogram that is produced by the coaxial superposition of conjugated p-radial order Laguerre–Gaussian beams. Specifically, a rotating chopper placed at the exit of the interferometer introduces a carrier frequency in the absence of surface deformation. A camera placed behind the chopper uses a multi-ring segmentation detection scheme to produce a Doppler shift relative to the carrier frequency at the radius of each ring in the presence of axisymmetric surface deformation. Locating the Doppler shifts gives the surface deformation velocities at those radii. Thus, the dynamic surface deformation profile can be obtained by integrating the velocities over time. We reveal the basic principles of the carrier frequency and the Doppler shifts in the COVI theoretically. As a proof-of-concept, an external force-induced axisymmetric mechanical surface deformation is measured dynamically to demonstrate the validity of the COVI. The results show that the measurement error of the surface deformation velocity is within (−2.1, 1.1 nm/s) for the velocity ranging from 20 to 86 nm/s. The lower limit of the measurable velocity can reach 20 nm/s. The measurement error of the surface deformation profile is less than 2.5 nm for the amplitude of the surface deformation of 500 nm.