Tao Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tao Zhang has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Yuhang Wang
College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin, People’s Republic of China
6 shared publications- Yuhang Wang
College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China
6 shared publications - Jian Zhang
School of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China
5 shared publications - Donglong Bian
Faculty of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin, Heilongjiang 150000, People’s Republic of China
3 shared publications - Rui Ma
Faculty of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin, Heilongjiang 150000, People’s Republic of China
3 shared publications - Jinghui Zhang
Mechanical and Electrical Engineering College, Northeast Forestry University, Harbin 150040, China
2 shared publications
Latest Publications
- 6 October 2026
- Published by Springer Nature in Journal of Real-Time Image Processing
- Vol. 23 (6) , 193
YOLO-NIR-DGLL: a lightweight animal detection model for nighttime active near-infrared imagery
- 6 October 2026
- Published by Springer Nature in Journal of Real-Time Image Processing
- Vol. 23 (6) , 193
YOLO-NIR-DGLL: a lightweight animal detection model for nighttime active near-infrared imagery
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (20) , 31393-31402
A Large-Range High-Resolution 3-D Contact Scanning Probe Based on Parallel Leaf-Spring Mechanism and Dual-CCD Optical Sensing
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (20) , 31393-31402
A Large-Range High-Resolution 3-D Contact Scanning Probe Based on Parallel Leaf-Spring Mechanism and Dual-CCD Optical Sensing
- Open Access
An IR-RIME-SQP-Based Spectrum Modification Method for Shallow Surface Electromagnetic Detection Transmitting Scheme of Metal Traps in Forested Areas
In the electromagnetic detection of shallow subsurface metal snaring traps in forested areas, conventional transmission schemes such as square waves, PRBS and PSO waveforms inevitably excite severe clutter in soils exhibiting viscous remanent magnetization (VRM), which drastically degrades the signal-to-clutter ratio (SCR). To resolve this issue, this paper proposes a spectrum modification method for the transmitting scheme based on an Interval Robust hybrid RIME and Sequential Quadratic Programming (IR-RIME-SQP) algorithm. By coupling the Debye relaxation characteristics of ferromagnetic targets with the soil VRM model, the proposed method concentrates limited transmission energy into a bell-shaped frequency window near the target’s characteristic frequency. Furthermore, interval analysis is introduced to ensure robust performance against the dynamic drift of coil parameters. The feasibility of this novel transmitting scheme is validated through ablation experiments and comparative simulations. Finally, laboratory measurements demonstrate that IR-RIME-SQP provides a more rational and efficient energy allocation strategy, improving the targeted frequency energy retention (TFER) by approximately 16.4% and thereby enhancing both detection efficiency and precision.
Open AccessAn IR-RIME-SQP-Based Spectrum Modification Method for Shallow Surface Electromagnetic Detection Transmitting Scheme of Metal Traps in Forested Areas
In the electromagnetic detection of shallow subsurface metal snaring traps in forested areas, conventional transmission schemes such as square waves, PRBS and PSO waveforms inevitably excite severe clutter in soils exhibiting viscous remanent magnetization (VRM), which drastically degrades the signal-to-clutter ratio (SCR). To resolve this issue, this paper proposes a spectrum modification method for the transmitting scheme based on an Interval Robust hybrid RIME and Sequential Quadratic Programming (IR-RIME-SQP) algorithm. By coupling the Debye relaxation characteristics of ferromagnetic targets with the soil VRM model, the proposed method concentrates limited transmission energy into a bell-shaped frequency window near the target’s characteristic frequency. Furthermore, interval analysis is introduced to ensure robust performance against the dynamic drift of coil parameters. The feasibility of this novel transmitting scheme is validated through ablation experiments and comparative simulations. Finally, laboratory measurements demonstrate that IR-RIME-SQP provides a more rational and efficient energy allocation strategy, improving the targeted frequency energy retention (TFER) by approximately 16.4% and thereby enhancing both detection efficiency and precision.
- 1 July 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (7) , 075035
Structural design of a speed-load synergistic stick-slip piezoelectric actuator with bi-directional backward motion suppression
The stick-slip piezoelectric actuator, employing the friction drive principle, will always experience backward motion, negatively affect the actuator’s accuracy and lead to increased wear, hence reducing its longevity. Furthermore, the coexistence of speed-load synergy and backward motion suppression at lower operating frequencies is still a technical challenge. This work presents a dual-layer stick-slip piezoelectric drive configuration. By supplying a designated piezoelectric signal to the upper and lower piezoelectric stacks to facilitate their cooperation, the lower lifting flexible hinge actuates the higher driving flexible hinge, resulting in the separation of the drive foot from the mover and the inhibition of rearward movement. This study delineates the structural composition and operational principles of the actuator, with enhanced performance substantiated using finite element analysis. A prototype of the actuator has been fabricated, and its output performance has been experimentally validated. The experimental results indicate that the actuator may substantially inhibit rearward motion. At a driving frequency of 375 Hz, with PES1 operating at 70 V and PES3 at 120 V, the actuator achieves a maximum speed of 9.75 mm s−1, making it appropriate for low-frequency operational contexts. At an equivalent drive voltage, the maximum vertical load reaches 900 g when the drive frequency is 1 Hz. The displacement variation rate of the driver’s forward and reverse motion is 1.69%, indicating strong bidirectional consistency.
- 1 July 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (7) , 075035
Structural design of a speed-load synergistic stick-slip piezoelectric actuator with bi-directional backward motion suppression
The stick-slip piezoelectric actuator, employing the friction drive principle, will always experience backward motion, negatively affect the actuator’s accuracy and lead to increased wear, hence reducing its longevity. Furthermore, the coexistence of speed-load synergy and backward motion suppression at lower operating frequencies is still a technical challenge. This work presents a dual-layer stick-slip piezoelectric drive configuration. By supplying a designated piezoelectric signal to the upper and lower piezoelectric stacks to facilitate their cooperation, the lower lifting flexible hinge actuates the higher driving flexible hinge, resulting in the separation of the drive foot from the mover and the inhibition of rearward movement. This study delineates the structural composition and operational principles of the actuator, with enhanced performance substantiated using finite element analysis. A prototype of the actuator has been fabricated, and its output performance has been experimentally validated. The experimental results indicate that the actuator may substantially inhibit rearward motion. At a driving frequency of 375 Hz, with PES1 operating at 70 V and PES3 at 120 V, the actuator achieves a maximum speed of 9.75 mm s−1, making it appropriate for low-frequency operational contexts. At an equivalent drive voltage, the maximum vertical load reaches 900 g when the drive frequency is 1 Hz. The displacement variation rate of the driver’s forward and reverse motion is 1.69%, indicating strong bidirectional consistency.
- 1 July 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (7)
A stick–slip piezoelectric actuator utilizing a special parallelogram flexible mechanism
A stick–slip actuator based on a parallelogram flexible mechanism is proposed to achieve high-performance output. This actuator utilizes the coupled motion generated when the parallelogram is driven by the piezo-stack to propel the slider. To minimize the shear force on the piezo-stack during operation, straight circular flexible hinge structure is added to the output end of the piezo-stack. In addition, a straight beam flexible hinges structure is incorporated into the parallelogram flexible mechanism to achieve a high output speed under conditions of low driving frequency. Static analysis, finite element simulation, optimized design, and experimental studies of the flexible mechanism were conducted. The finite element analysis indicates that the flexible mechanism, based on a parallelogram flexible mechanism, can generate motion in both the X and Y directions, reduce the shear force on the piezo-stack, and increase the output speed of the actuator, among other functions. A prototype of the stick–slip piezoelectric actuator was fabricated, and a measurement system was developed and experimentally validated against the results of the theoretical analysis and finite element simulation. The experimental results demonstrate that the actuator achieves a maximum output speed of 17.64 mm/s, a resolution of 62 nm, a maximum load capacity of 310 g, and excellent repetitive positioning accuracy, with the structural dimensions of the stator measuring only 43 × 44 × 10 mm3.
- 1 July 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (7)
A stick–slip piezoelectric actuator utilizing a special parallelogram flexible mechanism
A stick–slip actuator based on a parallelogram flexible mechanism is proposed to achieve high-performance output. This actuator utilizes the coupled motion generated when the parallelogram is driven by the piezo-stack to propel the slider. To minimize the shear force on the piezo-stack during operation, straight circular flexible hinge structure is added to the output end of the piezo-stack. In addition, a straight beam flexible hinges structure is incorporated into the parallelogram flexible mechanism to achieve a high output speed under conditions of low driving frequency. Static analysis, finite element simulation, optimized design, and experimental studies of the flexible mechanism were conducted. The finite element analysis indicates that the flexible mechanism, based on a parallelogram flexible mechanism, can generate motion in both the X and Y directions, reduce the shear force on the piezo-stack, and increase the output speed of the actuator, among other functions. A prototype of the stick–slip piezoelectric actuator was fabricated, and a measurement system was developed and experimentally validated against the results of the theoretical analysis and finite element simulation. The experimental results demonstrate that the actuator achieves a maximum output speed of 17.64 mm/s, a resolution of 62 nm, a maximum load capacity of 310 g, and excellent repetitive positioning accuracy, with the structural dimensions of the stator measuring only 43 × 44 × 10 mm3.
- 1 June 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (6)
Underwater 3D measurement based on improved YOLOv8n and laser scanning imaging device
The wide range of optical planes in underwater laser imaging results in the presence of a large number of noisy light bars in the background region. Since the shape and intensity of these noisy light bars are very similar to the target information, it is difficult to detect and eliminate them accurately. In this paper, a deep learning algorithm named YOLOv8-FWR is proposed, which can effectively improve the efficiency and quality of underwater laser imaging by combining with laser scanning imaging equipment. First, we introduce a novel pooling module called Focal_SPPF to mitigate the impact of background noise. Second, we propose a weighted feature Concat module to enhance the detection of small target light bars located at the object’s edges. Finally, to enhance the model’s adaptability for underwater deployment, we optimized the C2f module through structural reparameterization techniques. This approach effectively reduced the model’s parameter count while enhancing its accuracy. We constructed a dataset containing a large amount of background noise by simulating the process of underwater laser scanning imaging and evaluated the effectiveness of the augmented model through ablation and comparison experiments. The experimental results indicate that our model outperforms the YOLOv8n by obtaining an 8.6% improvement on mAP50–95 and reducing the parameter count by 37%. A favorable balance between detection accuracy and number of parameters is achieved. Meanwhile, experiments on VOC2012 and the Underwater Detection Dataset (UDD) verify its good generalizability. Finally, we built a rotating line laser scanning imaging system and validated its effectiveness through underwater laser scanning experiments.
- 1 June 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (6)
Underwater 3D measurement based on improved YOLOv8n and laser scanning imaging device
The wide range of optical planes in underwater laser imaging results in the presence of a large number of noisy light bars in the background region. Since the shape and intensity of these noisy light bars are very similar to the target information, it is difficult to detect and eliminate them accurately. In this paper, a deep learning algorithm named YOLOv8-FWR is proposed, which can effectively improve the efficiency and quality of underwater laser imaging by combining with laser scanning imaging equipment. First, we introduce a novel pooling module called Focal_SPPF to mitigate the impact of background noise. Second, we propose a weighted feature Concat module to enhance the detection of small target light bars located at the object’s edges. Finally, to enhance the model’s adaptability for underwater deployment, we optimized the C2f module through structural reparameterization techniques. This approach effectively reduced the model’s parameter count while enhancing its accuracy. We constructed a dataset containing a large amount of background noise by simulating the process of underwater laser scanning imaging and evaluated the effectiveness of the augmented model through ablation and comparison experiments. The experimental results indicate that our model outperforms the YOLOv8n by obtaining an 8.6% improvement on mAP50–95 and reducing the parameter count by 37%. A favorable balance between detection accuracy and number of parameters is achieved. Meanwhile, experiments on VOC2012 and the Underwater Detection Dataset (UDD) verify its good generalizability. Finally, we built a rotating line laser scanning imaging system and validated its effectiveness through underwater laser scanning experiments.
- 1 June 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (6) , 065015
A high-bandwidth compact micro/nano-positioning stage based on a double parallelogram compliant mechanism
This paper introduces a novel piezoelectric actuator (PEA)-driven two-degree-of-freedom micro/nano-positioning stage for high-precision adjustments in small-space situations. To enhance stage compactness and dynamic performance while significantly reducing parasitic motions, the composite leaf-type double parallelogram mechanism and the leaf-type double parallelogram mechanism are presented for implementation in guided and decoupled mechanisms, respectively. The composite bridge arm structure and compact double parallelogram design enable the amplification mechanism to provide significant lateral rigidity and safeguard the PEA.The orthogonal arrangement of the composite bridge type amplification mechanism and the dual parallelogram decoupling guiding mechanism are integrated to achieve full decoupling of the stage at both the input and output ends. The compliance matrix method and Lagrange’s equation were employed to establish mathematical analytical models of the static and dynamic characteristics, which were subsequently validated through finite element analysis. The stage’s static and dynamic performances were thoroughly assessed through experiments. The closed-loop control of the PEA utilizing integral strain gauges effectively eliminates the nonlinear hysteresis issue on the stage and exhibits proficient trajectory tracking capability. The experimental findings indicate that the motion range of the precision positioning stage is 51.71 × 49.56 µm2, the output coupling displacement error is under 1%, the displacement resolution is 12 nm, and the natural frequencies of the X-axis and Y-axis are 429 Hz and 438 Hz, respectively.
- 1 June 2025
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 34 (6) , 065015
A high-bandwidth compact micro/nano-positioning stage based on a double parallelogram compliant mechanism
This paper introduces a novel piezoelectric actuator (PEA)-driven two-degree-of-freedom micro/nano-positioning stage for high-precision adjustments in small-space situations. To enhance stage compactness and dynamic performance while significantly reducing parasitic motions, the composite leaf-type double parallelogram mechanism and the leaf-type double parallelogram mechanism are presented for implementation in guided and decoupled mechanisms, respectively. The composite bridge arm structure and compact double parallelogram design enable the amplification mechanism to provide significant lateral rigidity and safeguard the PEA.The orthogonal arrangement of the composite bridge type amplification mechanism and the dual parallelogram decoupling guiding mechanism are integrated to achieve full decoupling of the stage at both the input and output ends. The compliance matrix method and Lagrange’s equation were employed to establish mathematical analytical models of the static and dynamic characteristics, which were subsequently validated through finite element analysis. The stage’s static and dynamic performances were thoroughly assessed through experiments. The closed-loop control of the PEA utilizing integral strain gauges effectively eliminates the nonlinear hysteresis issue on the stage and exhibits proficient trajectory tracking capability. The experimental findings indicate that the motion range of the precision positioning stage is 51.71 × 49.56 µm2, the output coupling displacement error is under 1%, the displacement resolution is 12 nm, and the natural frequencies of the X-axis and Y-axis are 429 Hz and 438 Hz, respectively.
- 15 October 2024
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (11) , 115011
Enhanced velocity and weight-bearing capability of piezoelectric viscous-slip actuators utilising a pentagonal flexible hinge configuration
This research presents a novel piezoelectric stick–slip actuator design that capable of achieving higher speeds and handling heavier loads. This addresses the requirement for improved performance in the precision engineering industry. The symmetrical configuration of the pentagonal displacement amplification flexible hinge structure produces the transverse motion. The pentagon’s deformable range is sufficiently broad to amplify the piezoelectric stack’s output displacement and convert it into the desired transverse output displacement. To enhance the load capacity of the piezoelectric stick–slip actuator, one can raise the coupling displacement of the driving foot output. The flexible hinge construction undergoes finite element analysis, and the simulation results meet the design assumptions. The structure has been enhanced to mitigate the potential occurrence of jamming. A prototype was constructed and subjected to rigorous testing to examine its performance. The testing results indicate that the highest attainable velocity is 15.8 mm s−1, with an impressive precision of 35.9 nm. Despite being subjected to a load of 308 g, the output displacement remains steady at 0.376 mm s−1. A comparative study of experimental and finite element simulation findings demonstrates the feasibility of the structural design.
- 15 October 2024
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 33 (11) , 115011
Enhanced velocity and weight-bearing capability of piezoelectric viscous-slip actuators utilising a pentagonal flexible hinge configuration
This research presents a novel piezoelectric stick–slip actuator design that capable of achieving higher speeds and handling heavier loads. This addresses the requirement for improved performance in the precision engineering industry. The symmetrical configuration of the pentagonal displacement amplification flexible hinge structure produces the transverse motion. The pentagon’s deformable range is sufficiently broad to amplify the piezoelectric stack’s output displacement and convert it into the desired transverse output displacement. To enhance the load capacity of the piezoelectric stick–slip actuator, one can raise the coupling displacement of the driving foot output. The flexible hinge construction undergoes finite element analysis, and the simulation results meet the design assumptions. The structure has been enhanced to mitigate the potential occurrence of jamming. A prototype was constructed and subjected to rigorous testing to examine its performance. The testing results indicate that the highest attainable velocity is 15.8 mm s−1, with an impressive precision of 35.9 nm. Despite being subjected to a load of 308 g, the output displacement remains steady at 0.376 mm s−1. A comparative study of experimental and finite element simulation findings demonstrates the feasibility of the structural design.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (7) , 9545-9554
Development of Elastic Diaphragm Structure for Ultralow Stiffness Probe and Mechanical Properties Testing Method
For the clamping element of the probe, we presented a novel multi-beam folded "Z" type triple-constrained diaphragm, achieving ultra-low measurement stiffness and stiffness isotropy through the modification of the flexible structure while improving the compactness of the probe system. Meanwhile, a mechanical model that analyzes the role of different parameters in the structure on the measurement stiffness was developed for the proposed diaphragm, which provides theoretical support for the optimal design of the microprobe. In addition, to verify the performance of the proposed diaphragm, a fiber optic-based force-measuring device (FOFD) was presented, which uses a cantilevered single mode fiber (SMF) for force measurements, achieving high accuracy and resolution by acquiring incident light by an objective lens and a CCD. Following experimental calibration, the FOFD demonstrates a sensitivity of 1.86 pixel/μN and a measurement range of 1.2 mN. The proof of concept was fully validated through experiments on the proposed diaphragm using FOFD, where the diaphragm is an excellent compliant mechanism and reduces the contact force when the probe operates at micro-trigger precision. Consequently, these results demonstrate the potential of the proposed multi-beam folded "Z"-shaped triple-constrained diaphragm for accurate probing in micro- and nano-applications, as well as the optimized fiber-optic force measurement device providing a more accurate calibration tool for various micro-force sensing applications.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (7) , 9545-9554
Development of Elastic Diaphragm Structure for Ultralow Stiffness Probe and Mechanical Properties Testing Method
For the clamping element of the probe, we presented a novel multi-beam folded "Z" type triple-constrained diaphragm, achieving ultra-low measurement stiffness and stiffness isotropy through the modification of the flexible structure while improving the compactness of the probe system. Meanwhile, a mechanical model that analyzes the role of different parameters in the structure on the measurement stiffness was developed for the proposed diaphragm, which provides theoretical support for the optimal design of the microprobe. In addition, to verify the performance of the proposed diaphragm, a fiber optic-based force-measuring device (FOFD) was presented, which uses a cantilevered single mode fiber (SMF) for force measurements, achieving high accuracy and resolution by acquiring incident light by an objective lens and a CCD. Following experimental calibration, the FOFD demonstrates a sensitivity of 1.86 pixel/μN and a measurement range of 1.2 mN. The proof of concept was fully validated through experiments on the proposed diaphragm using FOFD, where the diaphragm is an excellent compliant mechanism and reduces the contact force when the probe operates at micro-trigger precision. Consequently, these results demonstrate the potential of the proposed multi-beam folded "Z"-shaped triple-constrained diaphragm for accurate probing in micro- and nano-applications, as well as the optimized fiber-optic force measurement device providing a more accurate calibration tool for various micro-force sensing applications.
- Open Access
A Study on Refraction Error Compensation Method for Underwater Spinning Laser Scanning Three-Dimensional Imaging
Laser scanning 3D imaging technology, because it can obtain accurate three-dimensional surface data, has been widely used in the search for wrecks and rescue operations, underwater resource development, and other fields. At present, the conventional underwater spinning laser scanning imaging system maintains a relatively fixed light window. However, in low-light situations underwater, the rotation of the scanning device causes some degree of water fluctuation, which warps the light strip data that the system sensor receives about the object’s surface. To solve this problem, this research studies an underwater 3D scanning and imaging system that makes use of a fixed light window and a spinning laser (FWLS). A refraction error compensation algorithm is investigated that is based on the fundamentals of linear laser scanning imaging, and a dynamic refraction mathematical model is established based on the motion of the imaging device. The results of the experiment on error analysis in an optimal underwater environment indicate that the error in reconstructing the radius is decreased by 60% (from 2.5 mm to around 1 mm) when compensating for the measurement data of a standard sphere with a radius of 20 mm. Moreover, the compensated point cloud data exhibit a higher degree of correspondence with the model of the standard spherical point cloud. Furthermore, we examine the impact of physical noise, measurement distance, and partial occlusion of the object on the imaging system inside an authentic underwater setting. This study is a good starting point for looking at the refractive error of an underwater laser scanning imaging system. It also provides to us some ideas for future research on the refractive error of other scanning imaging methods.
Open AccessA Study on Refraction Error Compensation Method for Underwater Spinning Laser Scanning Three-Dimensional Imaging
Laser scanning 3D imaging technology, because it can obtain accurate three-dimensional surface data, has been widely used in the search for wrecks and rescue operations, underwater resource development, and other fields. At present, the conventional underwater spinning laser scanning imaging system maintains a relatively fixed light window. However, in low-light situations underwater, the rotation of the scanning device causes some degree of water fluctuation, which warps the light strip data that the system sensor receives about the object’s surface. To solve this problem, this research studies an underwater 3D scanning and imaging system that makes use of a fixed light window and a spinning laser (FWLS). A refraction error compensation algorithm is investigated that is based on the fundamentals of linear laser scanning imaging, and a dynamic refraction mathematical model is established based on the motion of the imaging device. The results of the experiment on error analysis in an optimal underwater environment indicate that the error in reconstructing the radius is decreased by 60% (from 2.5 mm to around 1 mm) when compensating for the measurement data of a standard sphere with a radius of 20 mm. Moreover, the compensated point cloud data exhibit a higher degree of correspondence with the model of the standard spherical point cloud. Furthermore, we examine the impact of physical noise, measurement distance, and partial occlusion of the object on the imaging system inside an authentic underwater setting. This study is a good starting point for looking at the refractive error of an underwater laser scanning imaging system. It also provides to us some ideas for future research on the refractive error of other scanning imaging methods.