MTM. I. Tarasevich

M. I. Tarasevich

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. I. Tarasevich has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of Diameter and Volume Fraction of Reinforcing Elements on the Formation of Composite Castings

    by M.I. Tarasevich, O.Y. Shynsky, I.A. Shalevska, I.V. Korniets, S.V. Gnyloskurenko, M.M. Dyachenko, О.й. Шинський, І.в. Корнієць

    For modern machinery, composite materials are of great importance because they ensure improved properties of parts. The work is dedicated to study the influence of the diameter and volume fraction of the reinforcement elements in the form of rods on the thermal processes that occur during the crystallization and structure formation of cast steel composites. Computational experiment and computer modeling were used to study the thermal interaction between the matrix melt (steel 35) and reinforcing elements (steel 20), phase transformation at their different diameters (2-10 mm) and volume fraction (10-50 %), the formation and growth dynamics of solid crusts at the interface between the “melt – reinforcing element” phases and the critical parameters that ensure optimal connection of the matrix alloy with the reinforcing elements. As a result a critical relationship of the diameter and volume fraction of the reinforcing elements (18–31.5 %) was established, which influences the quality of adhesion (bonding) between phases and the microstructure of the material. Regression models have been developed to predict temperature regimes on the surface of reinforcing elements depending on their diameter and volume fraction and the optimal technological parameters for obtaining composite castings have been determined. With diameters of reinforcing elements of 2-5 mm, their volume fraction of 10-50 % complete melting of the reinforcing phase occurs, which ensures homogenization of the structure. For rod diameters of 6-10 mm their critical (or maximum) volume fractions are indicated for 7 mm — 21 %, for 9 mm — 16 %, in which optimal phase connection is achieved without creating a stable solid crust. The practical significance of these results lies in the possibility of precise control and optimization of technological parameters when obtaining high-quality cast composites with minimal defects. Для сучасного машинобудування актуальними є композиційні матеріали, які забезпечують покращені властивості деталей. Роботу присвячено дослідженню впливу діаметра та об'ємної частки армувальних елементів у вигляді стрижнів на теплові процеси, які мають місце при кристалізації та формуванні структури литих сталевих композиційних матеріалів. Методами обчислювального експерименту та комп'ютерного моделювання було досліджено теплову взаємодію між матричним розплавом (сталь 35) та армуючими елементами (сталь 20), фазові перетворення при різних поєднаннях їх діаметрів (2—10 мм) та об'ємної частки (10—50 %), утворення та динаміку росту твердих кірок на межі розділу фаз «рідкий сплав — армувальний елемент», критичні параметри, що забезпечують оптимальне з’єднання матричного сплаву з армуючими елементами. У результаті роботи встановлені критичні співвідношення діаметра та об'ємної частки армуючих елементів (18—31,5 %), які впливають на якість зчеплення фаз та мікроструктуру матеріалу, розроблені регресійні моделі для прогнозування температурних режимів на поверхні армуючих елементів залежно від їх діаметра та об'ємної частки, визначені оптимальні технологічні параметри одержання композиційних виливків. При діаметрах армуючих елементів 2—5 мм та об'ємній їх частці 10—50 % відбувається повне розплавлення армуючої фази, що забезпечує гомогенізацію структури. Для стрижнів діаметром 6—10 мм визначено граничні об'ємні частки: для 7 мм — 21 %, для 9 мм — 16 %, при яких досягається оптимальне з'єднання фаз без утворення стійкої твердої кірки. Практична значимість одержаних результатів полягає у можливості точного контролю та оптимізації технологічних параметрів при одержанні якісних литих композитів з мінімальними дефектами.


  • Open Access

    Peculiarities of structure formation of copper-doped post-eutectoid steels

    by Y. G. Kvasnytska, M. I. Tarasevich, S. G. Grigorenko, V. A. Kostin, L. M. Kapitanchuk, T. G. Solomiychuk, N. V. Kiryakova, I. V. Oleksenko

    The structural state of pre-eutectoid steels alloyed with copper in the range of up to 28% was studied. It was established that the alloying of steel with a carbon content of 1.3% with copper in the amount of 8, 12 and 28% leads to the formation of the primary and secondary copper -phase The main metallic component of the structure of the studied copper-alloyed steels is represented by thin-plate copper pearlite with inclusions on the boundaries of the primary austenite grains of secondary cementite and secondary inclusions of the copper -phase. The results of the X-ray spectral microanalysis showed that the primary copperite of the -phase consists of 92.5% of copper and 7.1% of iron. The transition zone between the primary copper precipitate and the matrix, the distribution of chemical elements in it, was studied. The total size of the interphase zone is 0.4 μm. It was established that alloying of steels with 8-28% copper contributes to the formation of a highly dispersed structure of copper thin-plate pearlite, as well as the formation of areas with deformed microvolumes near the primary copper e-phase, which constitute a significant barrier to the movement of dislocations. Thus, a state with increased resistance to dynamic loads has been formed at the micro level. The obtained results open up the possibility of using post-eutectoid steels alloyed with copper in the corresponding highly loaded products Keywords: structure, post-eutectoid steel, alloying, thin-plate pearlite, e-phase, iron, spectrum.


  • Open Access

    INFLUENCE OF THE MASS RATIO OF THE REINFORCEMENT ELEMENT AND MATRIX ALLOY FOR FORMING HETEROGENEOUS CASTING

    by М.I. Tarasevich, O. Shinsky, I.A. Shalevska, I.V. Korniets

    To obtain of castings with special functional properties, metal alloys are reinforced by necessary components in the liquid phase state. To solve an important technological problem when combining the components of a reinforced system regarding formation reliable connection at the boundary "reinforcing element - matrix alloy" in the article, the change in the thermal state of the reinforced casting depending on the mass ratio of reinforcing elements and matrix alloy, which was varied from 10% to 50%, was investigated using mathematical and computer modeling methods. A cylindrical casting made of 35L steel with a diameter of 100 mm and a height of 200 mm, reinforced with cylindrical metal elements made of 20L steel with a diameter of 10 mm, was chosen as the object of the study. The initial temperature of the reinforcing elements was 20 °C; the pouring temperature of the matrix alloy was 1600 °C. The computational experiment was performed using a representative volume that corresponds to the studied casting. The thermophysical features of the interaction of the liquid and solid phases during the formation of a heterogeneous casting with the appropriate mass ratio of the components have been established. Based on the results of a computational experiment, the article provides graphical dependences of the temperature changes of the reinforcing element and metal during the formation of the casting and the thickness of the layer of metal that has frozen on the reinforcing element, when its volume fraction changes. The analysis of change of temperature of the liquid metal and the reinforcing element showed that the heat flow is sent to the heating of the reinforcing element. After a certain time a temperature is established in the "reinforcing phase — liquid metal" system, the value of which depends on the percentage of the reinforcing phase content. A series of computational experiments made it possible to establish that with a reinforcing phase content of up to 13 percent, the surface of the reinforcing element reaches the solidus temperature of the liquid metal in 2.25 seconds. Thus, the reinforcing element is in a two-phase state, and the reinforcing phase accelerated the heat and mass exchange processes and was not fixed as a reinforcing element in the casting. A reliable diffusion connection with the matrix alloy is ensured at a reinforcement content of 18% to 31.5%, while the surface of the reinforcing element acts as the center of crystallization. Increasing the reinforcing metal phase by more than 32 percent during gravity pouring of metal is impractical, because then the conditions for the effective connection of the reinforcing and liquid phase in the solidification process will not be provided. The obtained results can be used in the production of castings with special functional properties. Для одержання виливків зі спеціальними функціональними властивостями металеві сплави армують необхідними компонентами у рідкофазному стані. Для вирішення важливої технологічної проблеми при поєднанні компонентів армованої системи щодо утворення надійного зв’язку на межі «армуючий елемент – матричний сплав» у статті методамиматематичного та комп’ютерного моделювання досліджено зміну теплового стану армованого виливка в залежності від масового співвідношення армуючих елементів та матричного сплаву (10 50 )%. Об’єктом дослідження обрано циліндричний виливок зі сталі 35Л діаметром 100 мм та висотою 200 мм, армований металевими циліндричними елементами зі сталі 20Л діаметром 10 мм. Початкова температура армуючих елементів становила 20 °С, температура заливання матричного сплаву – 1600 °С. Обчислювальний експеримент проводили з використанням представницького об’єму, який відповідає досліджуваному виливку. Установлено теплофізичні особливості взаємодії рідкої й твердої фаз при формуванні гетерогенного виливка при відповідному масовому співвідношенні компонентів. За результатами обчислювального експерименту у статті наведено графічні залежності зміни температури армуючого елемента та металу під час формування виливка й товщини шару металу, що наморозився на армуючому елементі, при зміні його об’ємної частки. Аналіз зміни температур рідкого металу та армуючого елемента показав, що тепловий потік направлений на розігрів армуючого елемента. Через певний час у системі «армуюча фаза — рідкий метал» встановлюється температура, величина якої залежить від відсотка вмісту армуючої фази. Серія обчислювальних експериментів дозволила встановити, що при вмісті армуючої фази до 13 %...