ACAkhilesh Kumar Chaudhary

Akhilesh Kumar Chaudhary

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Akhilesh Kumar Chaudhary has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High Performance Lead‐Free Perovskite‐Based Photodetector for Low‐Light Intensity Detection in Biomedical Applications

    by Richa Srivastava, Sudhanshu Verma, Akhilesh Kumar Chaudhary, Anupam Sahu

    This work presents a comprehensive numerical study on a lead‐free, tin‐based perovskite photodetector (PPD) designed for low‐light biomedical sensing applications. Using CH 3 NH 3 SnBr 3 as the active absorber layer, we model a device architecture comprising FTO/CdZnS/CH 3 NH 3 SnBr 3 /Spiro‐OMeTAD/Au, optimizing key parameters through combined SCAPS‐1D and COMSOL Multiphysics simulations. We systematically investigate the influence of absorber thickness, defect density, donor doping, electric field distribution, series and shunt resistance, and interface properties to maximize optoelectronic performance. The optimized PPD achieves a peak responsivity of 0.55 A/W and a detectivity of 9.7 × 10 14 Jones within the red‐light spectral window (680–790 nm), demonstrating enhanced charge carrier lifetimes and effective interfacial charge extraction. These results highlight the potential of CH 3 NH 3 SnBr 3 as an eco‐friendly alternative to lead‐based perovskites, advancing the development of high‐sensitivity, low‐illumination photodetectors for biomedical imaging and diagnostics.


  • Elevating Red and Near‐Infrared Detectivity With CsSnI3 Perovskite Photodetectors Featuring GO and PCBM as Charge Transport Layers

    by Pallavi Pandey, Akhilesh Kumar Chaudhary, Sudhanshu Verma

    This study focuses on enhancing the performance of photodetector through the utilization of inorganic perovskite material. It emphasizes that the unique properties of perovskite materials contribute to the superior performance of the photodetector. The focus is on the design and enhancement of CsSnI3‐based photodetector having graphene oxide (GO) and PCBM as charge transport layer, analysing their potential for improved operation. The design process involves a series of optimizations to the device layers, particularly the absorber layer's thickness and defects, which is critical for enhanced efficiency. The designed photodetector exhibits a better responsivity and detectivity in red and near infrared region and maximum responsivity of 0.68 A/W and detectivity of 9 × 1012 Jones. The SCAPS‐1D tool is employed to facilitate the design analysis, enabling the fine‐tuning of the device parameters. The findings highlight the effectiveness of perovskite materials in boosting photodetector performance.


  • Design of Perovskite‐Based Photodetector Demonstrating Wide Spectral Responsivity Employing Graphene Oxide for Enhanced Electron Transport

    by Richa Srivastava, Sudhanshu Verma, Akhilesh Kumar Chaudhary

    Perovskite‐based photodetectors have gained significant attention due to their remarkable optoelectronic properties, including high absorption coefficients, tunable bandgaps, and suitable carrier diffusion lengths. This work focuses on designing a high‐performance perovskite photodetector with a device structure of FTO/GO/CH3NH3SnBr3/Zn3P2/Au, utilizing SCAPS‐1D simulations to explore key performance parameters. The analysis systematically examines the effects of crucial factors such as the perovskite layer thickness and defect densities on important device metrics, including detectivity, responsivity, and dark current. In this design, CH3NH3SnBr3 (methylammonium thin bromide) serves as the absorber layer, while GO (graphene oxide) and Zn3P2 (zinc phosphide) act as interfacial layers, contributing to enhanced device performance. The simulated photodetector demonstrates an impressive short‐circuit current density(JSC) of 25.68 mA cm−2 and achieves a quantum efficiency exceeding 95% in the visible spectrum. Additionally, the device shows a maximum detectivity of 9.7 × 1016 Jones and a responsivity peak of 0.57 A W−1, particularly in the red and near‐infrared regions of the spectrum. These results underscore the immense potential of perovskite materials for developing efficient, wide‐spectrum photodetectors with enhanced optoelectronic characteristics.


  • Enhancement in Photodetector Sensitivity Using All‐Inorganic Perovskite Absorber RbGeI3 and Copper Bismuth Thiocyanate for Superior Charge Transport

    by Akhilesh Kumar Chaudhary, Pallavi Pandey, Shivangi Yadav, Sudhanshu Verma, Anupam Sahu

    This study investigates a photodetector design using the nontoxic, all‐inorganic perovskite material RbGeI3, which is distinguished by its efficient light absorption and excellent photoelectric conversion properties. Incorporating copper bismuth thiocyanate (CBTS) and indium gallium zinc oxide layers, this design enhances charge transport, leading to a photodetector that exhibits exceptional sensitivity across the visible spectrum, along with a peak responsivity of 0.63 A W−1 and a detectivity of 1.37 × 1013 Jones in the near‐infrared (NIR) at 900 nm. The proposed photodetector exhibits wide‐spectrum detection, encompassing both the visible range and the NIR region. These results position RbGeI3 and CBTS as compelling alternatives to traditional photodetector materials such as Si‐Ge, InGaAs, ZnO, and GaN. Validation is achieved through simulations using the SCAPS‐1D simulator, underscoring the potential of perovskite materials for advanced photodetector applications.


  • MASnI3-based perovskite solar cell utilizing oxygen-free charge transport layers to alleviate Sn oxidation for stability: A comprehensive investigation

    by Akhilesh Kumar Chaudhary, Sudhanshu Verma, R. K. Chauhan

    This study details the design and optimization of a high-performance, stable perovskite solar cell utilizing the nontoxic Sn-based perovskite MASnI3 as the absorber layer. To address the critical challenge of Sn oxidation, oxygen-free electron transport layers (ETLs) and hole transport layers (HTLs) are employed. Comprehensive simulations of 56 ETL/HTL combinations revealed 12 high-performing configurations, with SnS2, WSSe, and ZnSe as notable ETLs and CuSbS2, Sb2S3, Sb2Se3, and Zn3P2 as effective HTLs. Further optimization pinpoints the FTO/SnS2/MASnI3/CuSbS2/Ni configuration as the most promising, achieving a short-circuit current density of 34.81 mA/cm2, open-circuit voltage of 0.89 V, fill factor of 82.19%, and a power conversion efficiency of 25.40%, along with 97% quantum efficiency in the visible spectrum. These findings underscore the potential of oxygen-free charge transport layers to mitigate the internal oxidation of Sn, which is crucial for enhancing the stability of the cell. A comprehensive study has been conducted to highlight the role of numerical methods, particularly using the Solar Cell Capacitance Simulator, a one-dimensional tool, in reducing the trial-and-error process and accelerating fabrication.


  • Design and optimization of (FA)2BiCuI6-based double perovskite solar cells using kesterite CBTS as hole transport layer for high power conversion and quantum efficiency

    by Shivangi Yadav, Pooja Lohia, Anupam Sahu, Akhilesh Kumar Chaudhary

    This work introduces the design of a novel architecture for double perovskite solar cells (DPSCs) utilizing (FA)2BiCuI6, known for its enhanced stability relative to single perovskite materials for production of efficient, ultra-thin solar cells. The proposed architecture features a unique device configuration of ITO/WO3/(FA)2BiCuI6/Cu2BaSnS4/W, incorporating a Kesterite type Cu-based quaternary chalcogenide material, Cu2BaSnS4 known as CBTS, is used as hole transport layer (HTL) with a bandgap of 1.9 eV, WO3 as the electron transport layer (ETL) with a 2.6 eV bandgap, and (FA)2BiCuI6 as the absorber layer with a 1.55 eV bandgap. The study provides an in-depth theoretical analysis of the energy band structure, defects, and quantum efficiency of the DPSC, highlighting the device’s post-optimization photovoltaic parameters. Remarkably, the optimized DPSC demonstrated superior performance with a PCE of 24.63%, Voc of 1.16 V, Jsc of 25.67 mA cm−2, and FF of 82.87%. The research also explores the effects of various factors on photovoltaic performance, including temperature, interface defect, and generation and recombination rates, as well as work function of back contact materials. The results underscore the exceptional potential of (FA)2BiCuI6, especially when combined with the HTL CBTS, in significantly reducing sheet resistance and enhancing the overall performance of solar cells. The design is validated using the SCAPS-1D simulation software tool.


  • Design of Next‐Generation Tin‐Based Perovskite Photodetector with Enhanced Spectral Responsivity for Eco‐friendly Applications

    by Pallavi Pandey, Akhilesh Kumar Chaudhary, Sudhanshu Verma

    This study introduces an environment‐friendly perovskite photodetector (PPD) utilizing the inorganic–organic perovskite CH3NH3SnI3 as the light‐absorbing layer. Perovskite materials, known for their exceptional optoelectronic properties, hold significant promise in photodetector fabrication. The proposed device architecture strategically employs NiO and TiO2 layers to facilitate efficient hole and electron transport. The CH3NH3SnI3‐based PPD demonstrates outstanding quantum efficiency across the visible spectrum, extending into infrared regions. It exhibits a responsivity of 0.68 A W−1 and a detectivity of 3.81 × 1013 Jones. Comprehensive defect and temperature analyses are performed to understand the behavior of the proposed device. These results underscore the potential of less toxic perovskite alternatives for high‐performance photodetectors. All simulations are conducted using the SCAPS‐1D simulator to ensure the validity of the findings.


  • Thermal and power performance optimization of cost-effective solar cells using eco-friendly perovskite materials

    by Akhilesh Kumar Chaudhary, Sudhanshu Verma, R K Chauhan

    In this paper, a novel solar cell is proposed that utilizes a Sn-based perovskite (CH3NH3SnI3) absorber layer and a graphene oxide (GO) hole transport layer. The proposed device demonstrates exceptional power conversion efficiency (PCE), fill factor (FF), temperature stability, and environmental sustainability, all while maintaining low cost. Through simulations and analysis using 1D SCAPS, it is shown that the proposed perovskite solar cell (PSC) achieves a PCE of 22.24% and an FF of 83% at 45 °C, with a quantum efficiency exceeding 85% in the visible spectrum. Furthermore, the proposed PSC maintains its performance at high temperatures ranging from 85 °C to 95 °C, in the wake of incorporation of GO and mesoporous carbon. The optimized value of the proposed PSC is then simulated with the inclusion of the microstructural properties in COMSOL Multiphysics and 20.92% PCE is observed. By avoiding toxic Pb-based materials and incorporating Sn-based materials as well as low-cost and scalable elements such as ZnO, GO, and mesoporous carbon, the proposed device minimizes its environmental impact and processing cost. Overall, this proposed PSC shows great promise as a viable option for large-scale solar energy applications.


  • Design of a low-cost, environment friendly perovskite solar cell with synergic effect of graphene oxide-based HTL and CH3NH3GeI3 as ETL

    by Akhilesh Kumar Chaudhary, Sudhanshu Verma, R K Chauhan

    This research explores a novel, environment friendly perovskite solar cell (PSC) featuring a lead-free CH3NH3SnI3 absorber layer, capitalizing on tin’s analogous electronic configuration and chemical properties to lead. Tin-based perovskite exhibits similar optoelectronic features to lead-based perovskite, such as high absorption coefficient and long carrier diffusion length and tin’s higher abundance than lead renders it a cost-effective and promising alternative for PSCs. The proposed PSC employs an FTO/CH3NH3GeI3/CH3NH3SnI3/GO/C structure, incorporating graphene oxide (GO) as the hole transport layer (HTL) and CH3NH3GeI3 as the electron transport layer (ETL). Graphene oxide, renowned for its exceptional electrical conductivity and low processing costs, enables efficient hole transfer, while the use of CH3NH3GeI3 as ETL not only ensures seamless electron transfer due to its compatible crystallographic structure with CH3NH3SnI3 but also mitigates interface defects, making it a critical aspect of the design. Carbon is used as the back contact, providing a cost-effective option to increase sustainability. The absorber layer parameters, such as the thickness of the absorber layer and acceptor density, are optimized. The effects of defect density, interface defects of HTL/absorber and ETL/absorber, as well as series and shunt resistance, are also analyzed. By optimizing absorber layer parameters, the solar cell attains a power conversion efficiency (PCE) of 24.11% and a fill factor exceeding 85% within the visible light spectrum range, showcasing the potential for a high-performance, environment friendly, and cost-effective solar cell substitute. Device simulations were performed using the SCAPS-1D tool.