Emir Günaltılı
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Emir Günaltılı has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Canbaz
Department of Civil Engineering, Eskisehir Osmangazi University, 26040 Eskisehir, Türkiye
2 shared publications - Canan Şamdan
Department of Chemical Engineering, Eskişehir Osmangazi University, 26040 Eskişehir, Türkiye
1 shared publication - Fatih Şamdan
Department of Civil Engineering, Eskisehir Osmangazi University, 26040 Eskisehir, Türkiye
1 shared publication - İlker Bekir Topcu
Eskişehir Osmangazi Üniversitesi
1 shared publication - Serdal Ünal
Eskişehir Osmangazi Üniversitesi
1 shared publication - Uğur Albayrak
Eskişehir Osmangazi Üniversitesi
1 shared publication
Latest Publications
- Open Access
- 29 September 2026
- Published by Tulpar Academic Publishing in Challenge Journal of Concrete Research Letters
- Vol. 17 (3) , 250-261
Effectiveness of TiO2 coating on concrete surfaces for photocatalytic degradation of solutions
In this study, the photocatalytic performance of TiO₂-coated concrete surfaces was systematically investigated with respect to coating configuration and catalyst loading using methylene blue (MB) and Rhodamine B (Rh-B) as model organic pollutants. TiO₂ was applied onto concrete surfaces at different concentrations (5, 10, 15, and 20 wt%) in both single-layer and double-layer configurations, and the degradation behavior of the dyes under UV irradiation was evaluated. The results revealed that increasing TiO₂ content significantly enhanced photocatalytic activity in both coating configurations. However, double-layer coatings consistently outperformed single-layer systems, particularly at higher TiO₂ loadings. The maximum degradation efficiencies reached 52.12% for MB and 77.4% for Rh-B under UV irradiation, demonstrating the effectiveness of TiO₂-coated surfaces in removing organic pollutants. Kinetic analysis indicated that the photocatalytic degradation process followed pseudo-first-order kinetics, with higher apparent rate constants (Kapp) observed in double-layer systems. This enhancement was attributed to increased availability of active sites, improved light utilization, and more efficient charge-carrier dynamics. Mechanistically, the generation of reactive oxygen species (ROS), such as hydroxyl and superoxide radicals, along with improved charge separation facilitated by surface hydroxyl groups and oxygen vacancies, played a key role in enhancing photocatalytic performance. Overall, the findings demonstrate that optimizing both TiO₂ loading and coating architecture provides an effective strategy for improving the photocatalytic efficiency of cement-based materials. The proposed double-layer TiO₂ coating system offers significant potential for developing self-cleaning, environmentally responsive construction materials for urban applications.
- 29 September 2026
- Published by Tulpar Academic Publishing in Challenge Journal of Concrete Research Letters
- Vol. 17 (3) , 250-261
Open AccessEffectiveness of TiO2 coating on concrete surfaces for photocatalytic degradation of solutions
In this study, the photocatalytic performance of TiO₂-coated concrete surfaces was systematically investigated with respect to coating configuration and catalyst loading using methylene blue (MB) and Rhodamine B (Rh-B) as model organic pollutants. TiO₂ was applied onto concrete surfaces at different concentrations (5, 10, 15, and 20 wt%) in both single-layer and double-layer configurations, and the degradation behavior of the dyes under UV irradiation was evaluated. The results revealed that increasing TiO₂ content significantly enhanced photocatalytic activity in both coating configurations. However, double-layer coatings consistently outperformed single-layer systems, particularly at higher TiO₂ loadings. The maximum degradation efficiencies reached 52.12% for MB and 77.4% for Rh-B under UV irradiation, demonstrating the effectiveness of TiO₂-coated surfaces in removing organic pollutants. Kinetic analysis indicated that the photocatalytic degradation process followed pseudo-first-order kinetics, with higher apparent rate constants (Kapp) observed in double-layer systems. This enhancement was attributed to increased availability of active sites, improved light utilization, and more efficient charge-carrier dynamics. Mechanistically, the generation of reactive oxygen species (ROS), such as hydroxyl and superoxide radicals, along with improved charge separation facilitated by surface hydroxyl groups and oxygen vacancies, played a key role in enhancing photocatalytic performance. Overall, the findings demonstrate that optimizing both TiO₂ loading and coating architecture provides an effective strategy for improving the photocatalytic efficiency of cement-based materials. The proposed double-layer TiO₂ coating system offers significant potential for developing self-cleaning, environmentally responsive construction materials for urban applications.
- Open Access
- 29 November 2023
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
Statistical Evaluation and Comparison of Concrete Produced in Eskisehir with Concrete Produced in Different Provinces in Turkey
In the research, statistical analysis of the compressive strength test results of concrete samples from C25/30 and C30/37 class ready-mixed concretes (RMC) produced in various concrete plants in Eskişehir in 2022 and poured in various construction sites and different construction sections (foundation and column, beam, slab) were made. The concrete quality was attempted to be evaluated in accordance with the C25/30 and C30/37 concrete classes created in different construction sites and building sections in Eskişehir using the results of the strength tests performed on a total of 1355 samples. The previous scientific studies were carried out within the framework of the statistical analysis of the compressive strength results of the C25/30 and C30/37 concrete class samples that were brought to the laboratory from various locations of different construction sites in Eskişehir, within the framework of the standards determined by the quality grades determined by ACI and TS EN 206. In the investigations, the information from the same strength classes that were poured in Eskişehir and different provinces in Turkey at various dates was compared and reviewed.
- 29 November 2023
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
Open AccessStatistical Evaluation and Comparison of Concrete Produced in Eskisehir with Concrete Produced in Different Provinces in Turkey
In the research, statistical analysis of the compressive strength test results of concrete samples from C25/30 and C30/37 class ready-mixed concretes (RMC) produced in various concrete plants in Eskişehir in 2022 and poured in various construction sites and different construction sections (foundation and column, beam, slab) were made. The concrete quality was attempted to be evaluated in accordance with the C25/30 and C30/37 concrete classes created in different construction sites and building sections in Eskişehir using the results of the strength tests performed on a total of 1355 samples. The previous scientific studies were carried out within the framework of the statistical analysis of the compressive strength results of the C25/30 and C30/37 concrete class samples that were brought to the laboratory from various locations of different construction sites in Eskişehir, within the framework of the standards determined by the quality grades determined by ACI and TS EN 206. In the investigations, the information from the same strength classes that were poured in Eskişehir and different provinces in Turkey at various dates was compared and reviewed.
- 15 September 2023
- Published by Tulpar Academic Publishing in Challenge Journal of Structural Mechanics
- Vol. 9 (3) , 84
Effect of dosage on the mechanical properties of epscrete
Epscrete, which is made by employing aggregate made of expanded polystyrene beads, is often used to make wall panels, block components, and insulating plates. For these products to have greater mechanical qualities, 400, 600, and 800 dose epscrete specimens were made in this research, which also considered the influence of cement quantity. The water-cement ratio was considered to be 0.5. In addition to the reference specimens, the same manufacture was carried out utilizing a 1% plasticizer admixture. Specimens were subjected to unit weight, ultrasonic pulse, water absorption, bending, and comprehension tests 7 and 28 days after production. The effects of the dose and plasticizer rate on the physical and mechanical properties of early and ultimate epscrete specimens were determined according to the unit weight, ultrasonic pulse velocity, water absorption rates, bending and compressive strength values. Increasing the dosage increased the ultrasonic pulse velocity, reduced water absorption by reducing the amount of gap and reduced water absorption, and increased compressive strength by approximately 65 % and bending strength by about 60 %. It has been determined that the mechanical and physical properties of epscrete are affected by dose and mixture ratios. By increasing the dosage, it has been seen that carrier light carrier blocks can be obtained.
- 15 September 2023
- Published by Tulpar Academic Publishing in Challenge Journal of Structural Mechanics
- Vol. 9 (3) , 84
Effect of dosage on the mechanical properties of epscrete
Epscrete, which is made by employing aggregate made of expanded polystyrene beads, is often used to make wall panels, block components, and insulating plates. For these products to have greater mechanical qualities, 400, 600, and 800 dose epscrete specimens were made in this research, which also considered the influence of cement quantity. The water-cement ratio was considered to be 0.5. In addition to the reference specimens, the same manufacture was carried out utilizing a 1% plasticizer admixture. Specimens were subjected to unit weight, ultrasonic pulse, water absorption, bending, and comprehension tests 7 and 28 days after production. The effects of the dose and plasticizer rate on the physical and mechanical properties of early and ultimate epscrete specimens were determined according to the unit weight, ultrasonic pulse velocity, water absorption rates, bending and compressive strength values. Increasing the dosage increased the ultrasonic pulse velocity, reduced water absorption by reducing the amount of gap and reduced water absorption, and increased compressive strength by approximately 65 % and bending strength by about 60 %. It has been determined that the mechanical and physical properties of epscrete are affected by dose and mixture ratios. By increasing the dosage, it has been seen that carrier light carrier blocks can be obtained.