Yue Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yue Zhao has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Shuo Zhang
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
5 shared publications - Yongxi Yang
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
4 shared publications - Chengning Zhang
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
3 shared publications - Zhaozong Li
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
2 shared publications Chengning Zhang
School of Mechanical and Vehicle Engineering, Beijing Institute of Technology, Beijing, China
1 shared publication- Chengning Zhang
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
1 shared publication
Latest Publications
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 3821-3832
An Efficient Method to Evaluate the Effect of Additional Air Gaps on the Cogging Torque for the PM Machines With Modular Stator
Due to the uncertainties in the manufacturing process, the additional air gaps (AAG) between adjacent stator segments in the modular stator machines are inevitable, which might deteriorate the cogging torque performance. To evaluate the influences of the uncertainties, a large number of finite element analysis (FEA) calculations on designs featuring different uncertain combinations are always required. The correspondingly high computational cost is the biggest obstacle to uncertainties analysis and robust design. To solve this problem, an approach based on the worst–uncertain–combination–analysis (WUCA) method is proposed to theoretically find the possible worst-case under uncertainties. With the help of the WUCA approach, the influence of AAG uncertainties on the cogging torque could be estimated by calculating at most two specific combinations. The efficacy of the proposed method is verified by FEA results for different pole/slot configurations. Then, the influence of the connecting tongue shape on cogging torque robustness is comparatively analyzed based on WUCA. It is found that the relatively complex T-shape is preferable from the robustness point. Finally, four prototypes are developed and tested to prove the proposed conclusion, and the experimental results are presented.
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 3821-3832
An Efficient Method to Evaluate the Effect of Additional Air Gaps on the Cogging Torque for the PM Machines With Modular Stator
Due to the uncertainties in the manufacturing process, the additional air gaps (AAG) between adjacent stator segments in the modular stator machines are inevitable, which might deteriorate the cogging torque performance. To evaluate the influences of the uncertainties, a large number of finite element analysis (FEA) calculations on designs featuring different uncertain combinations are always required. The correspondingly high computational cost is the biggest obstacle to uncertainties analysis and robust design. To solve this problem, an approach based on the worst–uncertain–combination–analysis (WUCA) method is proposed to theoretically find the possible worst-case under uncertainties. With the help of the WUCA approach, the influence of AAG uncertainties on the cogging torque could be estimated by calculating at most two specific combinations. The efficacy of the proposed method is verified by FEA results for different pole/slot configurations. Then, the influence of the connecting tongue shape on cogging torque robustness is comparatively analyzed based on WUCA. It is found that the relatively complex T-shape is preferable from the robustness point. Finally, four prototypes are developed and tested to prove the proposed conclusion, and the experimental results are presented.
- 30 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (3) , 1997-2009
The Coupling Effect of Manufacturing Tolerances and Rotor Eccentricity on Cogging Torque
Manufacturing tolerances and rotor eccentricity are two typical manufacturing uncertainties in actual permanent-magnet (PM) motors, which lead to the deterioration of cogging torque. In this paper, a vector analysis method is proposed to theoretically explain the coupling mechanism of manufacturing tolerances and rotor eccentricity on the additional harmonic components (AHCs) of cogging torque. First, the AHCs of cogging torque introduced by the respective impacts of manufacturing tolerances and rotor eccentricity are summarized. Then, the coupling effect of manufacturing tolerances and rotor eccentricity on the amplitudes of these AHCs is analyzed based on the proposed method, and its efficacy is verified through finite element simulations. It is found that the coupling effects in PM motors with varying parameters and uncertain values are distinct, and the reason is discussed. Subsequently, the proposed method is used in the modification of the worst-uncertain-combination-analysis method to evaluate the robustness of cogging torque under comprehensive manufacturing uncertainties. Finally, prototypes with different combinations of uncertainties are deliberately designed and tested, and the coupling effect is verified by the experimental results.
- 30 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (3) , 1997-2009
The Coupling Effect of Manufacturing Tolerances and Rotor Eccentricity on Cogging Torque
Manufacturing tolerances and rotor eccentricity are two typical manufacturing uncertainties in actual permanent-magnet (PM) motors, which lead to the deterioration of cogging torque. In this paper, a vector analysis method is proposed to theoretically explain the coupling mechanism of manufacturing tolerances and rotor eccentricity on the additional harmonic components (AHCs) of cogging torque. First, the AHCs of cogging torque introduced by the respective impacts of manufacturing tolerances and rotor eccentricity are summarized. Then, the coupling effect of manufacturing tolerances and rotor eccentricity on the amplitudes of these AHCs is analyzed based on the proposed method, and its efficacy is verified through finite element simulations. It is found that the coupling effects in PM motors with varying parameters and uncertain values are distinct, and the reason is discussed. Subsequently, the proposed method is used in the modification of the worst-uncertain-combination-analysis method to evaluate the robustness of cogging torque under comprehensive manufacturing uncertainties. Finally, prototypes with different combinations of uncertainties are deliberately designed and tested, and the coupling effect is verified by the experimental results.
- Open Access
- 12 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 57767-57779
An Improved Model-Free Predictive Current Control for PMSM Drives Based on Current Circle Tracking Under Low-Speed Conditions
The model predictive current control (MPCC) method for permanent magnet synchronous motor (PMSM) has been widely applied due to its quick current response. However, the performance of MPCC relies on the real-time model accuracy deeply. Meanwhile, the large stator current harmonic under low-speed conditions is another defect of MPCC. To solve these problems, an improved model-free predictive current control method based on online data-driven, and a novel modulation method based on current increment synthesis are proposed in this paper. Firstly, the unknown polynomial related to PMSM parameters (regarding resistance, inductance, and flux-linkage) is defined as a lumped term in the MPCC model. The stator current and voltage measurements in the latest 15 sampling periods are registered as a database by the rolling update mechanism, and used to identify the unknown lumped term. Secondly, according to the identified result, the current increments corresponding to each active voltage in the next sampling period are updated online. Finally, the duty cycle of the inverter at the next sampling period is calculated based on the minimization of the predicted current increment tracking error. The effectiveness and real-time implementation of the proposed method are verified by experiments under different working conditions.
- 12 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 57767-57779
Open AccessAn Improved Model-Free Predictive Current Control for PMSM Drives Based on Current Circle Tracking Under Low-Speed Conditions
The model predictive current control (MPCC) method for permanent magnet synchronous motor (PMSM) has been widely applied due to its quick current response. However, the performance of MPCC relies on the real-time model accuracy deeply. Meanwhile, the large stator current harmonic under low-speed conditions is another defect of MPCC. To solve these problems, an improved model-free predictive current control method based on online data-driven, and a novel modulation method based on current increment synthesis are proposed in this paper. Firstly, the unknown polynomial related to PMSM parameters (regarding resistance, inductance, and flux-linkage) is defined as a lumped term in the MPCC model. The stator current and voltage measurements in the latest 15 sampling periods are registered as a database by the rolling update mechanism, and used to identify the unknown lumped term. Secondly, according to the identified result, the current increments corresponding to each active voltage in the next sampling period are updated online. Finally, the duty cycle of the inverter at the next sampling period is calculated based on the minimization of the predicted current increment tracking error. The effectiveness and real-time implementation of the proposed method are verified by experiments under different working conditions.
- Open Access
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 6672-6683
Analysis of Cogging Torque of Permanent Magnet Motors Under Mixed-Eccentricity and Manufacturing Tolerances
The rotor eccentricity and manufacturing tolerances caused by unavoidable uncertainties in the process of manufacturing deteriorate the cogging torque of permanent magnet (PM) motors. To guide the design and optimization of PM motors, this paper proposes an analytical model to reveal the effects of mixed-eccentricity (ME) and manufacturing tolerances on the harmonic components of cogging torque. A coefficient is introduced to intuitively characterize the impact of ME on the distribution of the air-gap length. Then a modified analytical model is developed to theoretically identify the additional harmonic components (AHCs) of cogging torque associated with the eccentricity and tolerances. And the main AHCs of cogging torque are quantitatively determined through the finite element method. Finally, suggestions to improve the robustness considering uncertainties by selecting pole/slot combination and pole-arc ratio are proposed.
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 6672-6683
Open AccessAnalysis of Cogging Torque of Permanent Magnet Motors Under Mixed-Eccentricity and Manufacturing Tolerances
The rotor eccentricity and manufacturing tolerances caused by unavoidable uncertainties in the process of manufacturing deteriorate the cogging torque of permanent magnet (PM) motors. To guide the design and optimization of PM motors, this paper proposes an analytical model to reveal the effects of mixed-eccentricity (ME) and manufacturing tolerances on the harmonic components of cogging torque. A coefficient is introduced to intuitively characterize the impact of ME on the distribution of the air-gap length. Then a modified analytical model is developed to theoretically identify the additional harmonic components (AHCs) of cogging torque associated with the eccentricity and tolerances. And the main AHCs of cogging torque are quantitatively determined through the finite element method. Finally, suggestions to improve the robustness considering uncertainties by selecting pole/slot combination and pole-arc ratio are proposed.
- Open Access
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 107019-107030
An Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine
The design tolerances and material defects are frequently inevitable in the real manufacturing process, where unexpected additional cogging torque might be caused as a result. An approach fast estimating the design performances under manufacturing uncertainties is highly expected. In this paper, the previously proposed worst-uncertain-combination-analysis (WUCA) approach is further modified, where the influences of rotor geometries could be taken into account. A 10-pole-12-slot (10P12S) permanent magnet (PM) machine with non-uniform air-gap considering the rotor uncertainties is taken as an example. The cogging torque robustness for designs with different air-gap saliency ratios are discussed and compared. A medium value of air-gap saliency is suggested to achieve a balance between the ideal and worst-scenario performance under rotor uncertainties. Three prototypes with different air-gap saliency ratios are manufactured, where the possibly worst-case under uncertainties are imitated with a special PM assembling sequence. The deduction is then verified by the experimental results of the prototypes.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 107019-107030
Open AccessAn Approach for Estimating the Cogging Torque Performance Considering Manufacturing Uncertainties for the IPM Machine
The design tolerances and material defects are frequently inevitable in the real manufacturing process, where unexpected additional cogging torque might be caused as a result. An approach fast estimating the design performances under manufacturing uncertainties is highly expected. In this paper, the previously proposed worst-uncertain-combination-analysis (WUCA) approach is further modified, where the influences of rotor geometries could be taken into account. A 10-pole-12-slot (10P12S) permanent magnet (PM) machine with non-uniform air-gap considering the rotor uncertainties is taken as an example. The cogging torque robustness for designs with different air-gap saliency ratios are discussed and compared. A medium value of air-gap saliency is suggested to achieve a balance between the ideal and worst-scenario performance under rotor uncertainties. Three prototypes with different air-gap saliency ratios are manufactured, where the possibly worst-case under uncertainties are imitated with a special PM assembling sequence. The deduction is then verified by the experimental results of the prototypes.