Dairo E. Pérez Sotelo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dairo E. Pérez Sotelo has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Bula
Department of Mechanical Engineering, Universidad del Norte, Barranquilla 081007, Colombia
2 shared publications - Jesús David Rhenals Julio
Department of Mechanical Engineering, Universidad de Córdoba, Monteria 230002, Colombia
2 shared publications - Jorge Mario Mendoza Fandiño
Department of Mechanical Engineering, Universidad de Córdoba, Monteria 230002, Colombia
2 shared publications - Luis F. Hernández Contreras
Department of Mechanical Engineering, Universidad de Córdoba, Monteria 230002, Colombia
2 shared publications - Manuel S. Páez Meza
Department of Chemical, Universidad de Córdoba, Monteria 230002, Colombia
2 shared publications - Carlos A. Medellín
Department of Mechanical Engineering, Universidad de Córdoba, Monteria 230002, Colombia
1 shared publication
Latest Publications
- Open Access
An Experimentally Constrained Open-Source Framework for Biomass Pyrolysis: TGA-Informed Ranzi Kinetics Implemented in DWSIM
Pyrolysis is a leading route for valorizing lignocellulosic residues, yet detailed multi-step kinetic schemes have so far been deployed only in costly commercial simulators, limiting reproducibility. This work couples thermogravimetric (TGA) characterization with process simulation in the free, open-source simulator DWSIM to predict the pyrolysis product distribution of corn cob from Córdoba, Colombia. The lignocellulosic composition (hemicellulose 24.3 ± 2.9, cellulose 36.4 ± 3.0, lignin 39.3 ± 0.9 wt%) was obtained by deconvolving the derivative thermogravimetric (DTG) curve with a five-parameter asymmetric double sigmoidal (Asym2sig) function (R2 > 0.9996). Pseudocomponent activation energies from the Coats–Redfern method (154.2, 124.6, and 29.9 kJ/mol) calibrated the primary reactions of a 17-reaction Ranzi scheme, extended with 18 secondary gas-phase steam reforming reactions. Validated against eight lignocellulosic biomasses, the calibrated model yielded a consolidated R2 = 0.853 and average absolute deviation (AAD) = 9.8%, with char predictions most accurate (AAD = 8.9%). For corn cob, a bio-oil-optimized yield of 55.0 wt% was predicted at 500 °C, transitioning to a syngas-rich regime (51.0 wt% gas) at 750 °C. This constitutes the calibrated Ranzi-scheme implementation in DWSIM, offering an accessible, reproducible pathway for biomass pyrolysis modeling.
Open AccessAn Experimentally Constrained Open-Source Framework for Biomass Pyrolysis: TGA-Informed Ranzi Kinetics Implemented in DWSIM
Pyrolysis is a leading route for valorizing lignocellulosic residues, yet detailed multi-step kinetic schemes have so far been deployed only in costly commercial simulators, limiting reproducibility. This work couples thermogravimetric (TGA) characterization with process simulation in the free, open-source simulator DWSIM to predict the pyrolysis product distribution of corn cob from Córdoba, Colombia. The lignocellulosic composition (hemicellulose 24.3 ± 2.9, cellulose 36.4 ± 3.0, lignin 39.3 ± 0.9 wt%) was obtained by deconvolving the derivative thermogravimetric (DTG) curve with a five-parameter asymmetric double sigmoidal (Asym2sig) function (R2 > 0.9996). Pseudocomponent activation energies from the Coats–Redfern method (154.2, 124.6, and 29.9 kJ/mol) calibrated the primary reactions of a 17-reaction Ranzi scheme, extended with 18 secondary gas-phase steam reforming reactions. Validated against eight lignocellulosic biomasses, the calibrated model yielded a consolidated R2 = 0.853 and average absolute deviation (AAD) = 9.8%, with char predictions most accurate (AAD = 8.9%). For corn cob, a bio-oil-optimized yield of 55.0 wt% was predicted at 500 °C, transitioning to a syngas-rich regime (51.0 wt% gas) at 750 °C. This constitutes the calibrated Ranzi-scheme implementation in DWSIM, offering an accessible, reproducible pathway for biomass pyrolysis modeling.
- Open Access
Effect of Thermal Severity on the Structural Evolution and Stability of Rice Husk Biochar
This study evaluates the effect of thermal severity on the yield, structural evolution, and stability of biochar produced from rice husk via controlled pyrolysis. The raw biomass, containing 1.67 wt% moisture, 60.94 wt% volatiles, and 21.66-wt% fixed carbon, proved highly suitable for thermochemical conversion. Using a 3 × 3 factorial design (500–700 °C; 30–60 min), variance analysis revealed temperature as the dominant variable (F = 67.15; p < 0.001; = 0.88), alongside a significant temperature time interaction (F = 6.19; p = 0.003). Maximum biochar yield occurred at 500 °C and 60 min (59.4 ± 2.0 wt%), whereas heating to 700 °C reduced yields to 41.8–44.0 wt% via enhanced devolatilization and secondary cracking. Structurally, the biochar developed a predominantly mesoporous matrix with a maximum BET surface area of 56.23 m2/g and ~4.9 nm average pore diameters. Furthermore, FTIR and DSC analyses demonstrated that higher thermal severity reduced oxygen-containing functional groups while increasing thermal stability and aromatic reorganization. Ultimately, 700 °C (at the 45 min residence time evaluated for porosimetry) provided the greatest structural development (maximum BET surface area), while 700 °C/60 min provided the highest thermal-oxidative stability, and lower severities favored biochar yield, revealing a trade-off between mass recovery and structural/stability performance. These findings establish that thermal severity dictates the physicochemical evolution of rice husk biochar, offering vital criteria for optimizing energy and environmental applications.Open AccessEffect of Thermal Severity on the Structural Evolution and Stability of Rice Husk Biochar
This study evaluates the effect of thermal severity on the yield, structural evolution, and stability of biochar produced from rice husk via controlled pyrolysis. The raw biomass, containing 1.67 wt% moisture, 60.94 wt% volatiles, and 21.66-wt% fixed carbon, proved highly suitable for thermochemical conversion. Using a 3 × 3 factorial design (500–700 °C; 30–60 min), variance analysis revealed temperature as the dominant variable (F = 67.15; p < 0.001; = 0.88), alongside a significant temperature time interaction (F = 6.19; p = 0.003). Maximum biochar yield occurred at 500 °C and 60 min (59.4 ± 2.0 wt%), whereas heating to 700 °C reduced yields to 41.8–44.0 wt% via enhanced devolatilization and secondary cracking. Structurally, the biochar developed a predominantly mesoporous matrix with a maximum BET surface area of 56.23 m2/g and ~4.9 nm average pore diameters. Furthermore, FTIR and DSC analyses demonstrated that higher thermal severity reduced oxygen-containing functional groups while increasing thermal stability and aromatic reorganization. Ultimately, 700 °C (at the 45 min residence time evaluated for porosimetry) provided the greatest structural development (maximum BET surface area), while 700 °C/60 min provided the highest thermal-oxidative stability, and lower severities favored biochar yield, revealing a trade-off between mass recovery and structural/stability performance. These findings establish that thermal severity dictates the physicochemical evolution of rice husk biochar, offering vital criteria for optimizing energy and environmental applications. - Open Access
Nanocarrier of α-Tocopheryl Succinate Based on a Copolymer Derivative of (4,7-dichloroquinolin-2-yl)methanol and Its Cytotoxicity against a Breast Cancer Cell Line
In order to improve the water solubility and, therefore, bioavailability and therapeutic activity of anticancer hydrophobic drug α-tocopherol succinate (α-TOS), in this work, copolymers were synthesized via free radicals from QMES (1-[4,7-dichloroquinolin-2-ylmethyl]-4-methacryloyloxyethyl succinate) and VP (N-vinyl-2-pirrolidone) using different molar ratios, and were used to nanoencapsulate and deliver α-TOS into cancer cells MCF-7. QMES monomer was chosen because the QMES pendant group in the polymer tends to hydrolyze to form free 4,7-dichloro-2-quinolinemethanol (QOH), which also, like α-TOS, exhibit anti-proliferative effects on cancerous cells. From the QMES-VP 30:70 (QMES-30) and 40:60 (QMES-40) copolymers obtained, it was possible to prepare aqueous suspensions of empty nanoparticles (NPs) loaded with α-TOS by nanoprecipitation. The diameter and encapsulation efficiency (%EE) of the QMES-30 NPs loaded with α-TOS were 128.6 nm and 52%; while for the QMES-40 NPs loaded with α-TOS, they were 148.8 nm and 65%. The results of the AlamarBlue assay at 72 h of treatment show that empty QMES-30 NPs (without α-TOS) produced a marked cytotoxic effect on MCF-7 breast cancer cells, corresponding to an IC50 value of 0.043 mg mL−1, and importantly, they did not exhibit cytotoxicity against healthy HUVEC cells. Furthermore, NP-QMES-40 loaded with α-TOS were cytotoxic with an IC50 value of 0.076 mg mL−1, demonstrating a progressive release of α-TOS; however, the latter nanoparticles were also cytotoxic to healthy cells in the range of the assayed concentrations. These results contribute to the search for a new polymeric nanocarrier of QOH, α-TOS or other hydrophobic drugs for the treatment of cancer or others diseases treatable with these drugs.
Open AccessNanocarrier of α-Tocopheryl Succinate Based on a Copolymer Derivative of (4,7-dichloroquinolin-2-yl)methanol and Its Cytotoxicity against a Breast Cancer Cell Line
In order to improve the water solubility and, therefore, bioavailability and therapeutic activity of anticancer hydrophobic drug α-tocopherol succinate (α-TOS), in this work, copolymers were synthesized via free radicals from QMES (1-[4,7-dichloroquinolin-2-ylmethyl]-4-methacryloyloxyethyl succinate) and VP (N-vinyl-2-pirrolidone) using different molar ratios, and were used to nanoencapsulate and deliver α-TOS into cancer cells MCF-7. QMES monomer was chosen because the QMES pendant group in the polymer tends to hydrolyze to form free 4,7-dichloro-2-quinolinemethanol (QOH), which also, like α-TOS, exhibit anti-proliferative effects on cancerous cells. From the QMES-VP 30:70 (QMES-30) and 40:60 (QMES-40) copolymers obtained, it was possible to prepare aqueous suspensions of empty nanoparticles (NPs) loaded with α-TOS by nanoprecipitation. The diameter and encapsulation efficiency (%EE) of the QMES-30 NPs loaded with α-TOS were 128.6 nm and 52%; while for the QMES-40 NPs loaded with α-TOS, they were 148.8 nm and 65%. The results of the AlamarBlue assay at 72 h of treatment show that empty QMES-30 NPs (without α-TOS) produced a marked cytotoxic effect on MCF-7 breast cancer cells, corresponding to an IC50 value of 0.043 mg mL−1, and importantly, they did not exhibit cytotoxicity against healthy HUVEC cells. Furthermore, NP-QMES-40 loaded with α-TOS were cytotoxic with an IC50 value of 0.076 mg mL−1, demonstrating a progressive release of α-TOS; however, the latter nanoparticles were also cytotoxic to healthy cells in the range of the assayed concentrations. These results contribute to the search for a new polymeric nanocarrier of QOH, α-TOS or other hydrophobic drugs for the treatment of cancer or others diseases treatable with these drugs.