Luis F. Hernández Contreras
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luis F. Hernández Contreras has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Bula
Department of Mechanical Engineering, Universidad del Norte, Barranquilla 081007, Colombia
3 shared publications - Jesús David Rhenals Julio
Department of Mechanical Engineering, Universidad de Córdoba, Monteria 230002, Colombia
3 shared publications - Jorge Mario Mendoza Fandiño
Department of Mechanical Engineering, Universidad de Córdoba, Monteria 230002, Colombia
3 shared publications - Dairo E. Pérez Sotelo
Department of Chemical, Universidad de Córdoba, Monteria 230002, Colombia
2 shared publications - Manuel S. Páez Meza
Department of Chemical, Universidad de Córdoba, Monteria 230002, Colombia
2 shared publications - Rafael David Gómez Vásquez
Faculty of Mechanical Engineering, Universidad Pontificia Bolivariana, Monteria 230002, Colombia
2 shared publications
Latest Publications
- Open Access
- 28 October 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
A systematic review of heterogeneous catalysts for hydrogen-rich syngas production via biomass gasification
- 28 October 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessA systematic review of heterogeneous catalysts for hydrogen-rich syngas production via biomass gasification
- Open Access
Thermodynamic Equilibrium Modeling and Optimization of Glycerol Air–Steam Gasification for Syngas Production
Biodiesel production generates ~10% crude glycerol as a byproduct, and its oversupply has depressed its value; the air–steam gasification of crude glycerol remains underexplored. This study models the equilibrium of that route through Gibbs minimization in Cantera, with solid carbon as a condensed phase. The model is verified against published equilibrium results and validated with 27 independent experimental points (RMSE of the H2 fraction of 0.027 for T ≥ 500 °C). The effects of temperature and of the S/G and A/G ratios on composition and heating value are evaluated, and an efficiency that accounts for the external heat and the steam enthalpy is optimized under two Q conventions. The efficiency exhibits an interior maximum at ≈433 °C (91.3%, nearly autothermal) where solid carbon formation is substantial (1.02 mol/mol), and the carbon-free boundary crosses S/G = 1 at T* = 685.1 °C. The constrained optimization places the practical optimum at T ≈ 686 °C, S/G = 1, A/G = 0.5 (η = 88.6%, C(s) = 0, LHV = 14.6 MJ/kg). Crude glycerol impurities modulate carbon formation: water reduces it (0.77 versus 1.02 mol/mol with 10 wt%) while methanol and MONG increase it (1.07 and 1.26 mol/mol with 5 wt%); for an 80/10/5/5 wt% crude, the crude-basis efficiency is ~90%. These results delimit the carbon-free conditions for valorizing crude glycerol.
Open AccessThermodynamic Equilibrium Modeling and Optimization of Glycerol Air–Steam Gasification for Syngas Production
Biodiesel production generates ~10% crude glycerol as a byproduct, and its oversupply has depressed its value; the air–steam gasification of crude glycerol remains underexplored. This study models the equilibrium of that route through Gibbs minimization in Cantera, with solid carbon as a condensed phase. The model is verified against published equilibrium results and validated with 27 independent experimental points (RMSE of the H2 fraction of 0.027 for T ≥ 500 °C). The effects of temperature and of the S/G and A/G ratios on composition and heating value are evaluated, and an efficiency that accounts for the external heat and the steam enthalpy is optimized under two Q conventions. The efficiency exhibits an interior maximum at ≈433 °C (91.3%, nearly autothermal) where solid carbon formation is substantial (1.02 mol/mol), and the carbon-free boundary crosses S/G = 1 at T* = 685.1 °C. The constrained optimization places the practical optimum at T ≈ 686 °C, S/G = 1, A/G = 0.5 (η = 88.6%, C(s) = 0, LHV = 14.6 MJ/kg). Crude glycerol impurities modulate carbon formation: water reduces it (0.77 versus 1.02 mol/mol with 10 wt%) while methanol and MONG increase it (1.07 and 1.26 mol/mol with 5 wt%); for an 80/10/5/5 wt% crude, the crude-basis efficiency is ~90%. These results delimit the carbon-free conditions for valorizing crude glycerol.
- Open Access
An Experimentally Constrained Open-Source Framework for Biomass Pyrolysis: TGA-Informed Ranzi Kinetics Implemented in DWSIM
Pyrolysis is a leading route for valorizing lignocellulosic residues, yet detailed multi-step kinetic schemes have so far been deployed only in costly commercial simulators, limiting reproducibility. This work couples thermogravimetric (TGA) characterization with process simulation in the free, open-source simulator DWSIM to predict the pyrolysis product distribution of corn cob from Córdoba, Colombia. The lignocellulosic composition (hemicellulose 24.3 ± 2.9, cellulose 36.4 ± 3.0, lignin 39.3 ± 0.9 wt%) was obtained by deconvolving the derivative thermogravimetric (DTG) curve with a five-parameter asymmetric double sigmoidal (Asym2sig) function (R2 > 0.9996). Pseudocomponent activation energies from the Coats–Redfern method (154.2, 124.6, and 29.9 kJ/mol) calibrated the primary reactions of a 17-reaction Ranzi scheme, extended with 18 secondary gas-phase steam reforming reactions. Validated against eight lignocellulosic biomasses, the calibrated model yielded a consolidated R2 = 0.853 and average absolute deviation (AAD) = 9.8%, with char predictions most accurate (AAD = 8.9%). For corn cob, a bio-oil-optimized yield of 55.0 wt% was predicted at 500 °C, transitioning to a syngas-rich regime (51.0 wt% gas) at 750 °C. This constitutes the calibrated Ranzi-scheme implementation in DWSIM, offering an accessible, reproducible pathway for biomass pyrolysis modeling.
Open AccessAn Experimentally Constrained Open-Source Framework for Biomass Pyrolysis: TGA-Informed Ranzi Kinetics Implemented in DWSIM
Pyrolysis is a leading route for valorizing lignocellulosic residues, yet detailed multi-step kinetic schemes have so far been deployed only in costly commercial simulators, limiting reproducibility. This work couples thermogravimetric (TGA) characterization with process simulation in the free, open-source simulator DWSIM to predict the pyrolysis product distribution of corn cob from Córdoba, Colombia. The lignocellulosic composition (hemicellulose 24.3 ± 2.9, cellulose 36.4 ± 3.0, lignin 39.3 ± 0.9 wt%) was obtained by deconvolving the derivative thermogravimetric (DTG) curve with a five-parameter asymmetric double sigmoidal (Asym2sig) function (R2 > 0.9996). Pseudocomponent activation energies from the Coats–Redfern method (154.2, 124.6, and 29.9 kJ/mol) calibrated the primary reactions of a 17-reaction Ranzi scheme, extended with 18 secondary gas-phase steam reforming reactions. Validated against eight lignocellulosic biomasses, the calibrated model yielded a consolidated R2 = 0.853 and average absolute deviation (AAD) = 9.8%, with char predictions most accurate (AAD = 8.9%). For corn cob, a bio-oil-optimized yield of 55.0 wt% was predicted at 500 °C, transitioning to a syngas-rich regime (51.0 wt% gas) at 750 °C. This constitutes the calibrated Ranzi-scheme implementation in DWSIM, offering an accessible, reproducible pathway for biomass pyrolysis modeling.
- Open Access
Effect of Thermal Severity on the Structural Evolution and Stability of Rice Husk Biochar
This study evaluates the effect of thermal severity on the yield, structural evolution, and stability of biochar produced from rice husk via controlled pyrolysis. The raw biomass, containing 1.67 wt% moisture, 60.94 wt% volatiles, and 21.66-wt% fixed carbon, proved highly suitable for thermochemical conversion. Using a 3 × 3 factorial design (500–700 °C; 30–60 min), variance analysis revealed temperature as the dominant variable (F = 67.15; p < 0.001; = 0.88), alongside a significant temperature time interaction (F = 6.19; p = 0.003). Maximum biochar yield occurred at 500 °C and 60 min (59.4 ± 2.0 wt%), whereas heating to 700 °C reduced yields to 41.8–44.0 wt% via enhanced devolatilization and secondary cracking. Structurally, the biochar developed a predominantly mesoporous matrix with a maximum BET surface area of 56.23 m2/g and ~4.9 nm average pore diameters. Furthermore, FTIR and DSC analyses demonstrated that higher thermal severity reduced oxygen-containing functional groups while increasing thermal stability and aromatic reorganization. Ultimately, 700 °C (at the 45 min residence time evaluated for porosimetry) provided the greatest structural development (maximum BET surface area), while 700 °C/60 min provided the highest thermal-oxidative stability, and lower severities favored biochar yield, revealing a trade-off between mass recovery and structural/stability performance. These findings establish that thermal severity dictates the physicochemical evolution of rice husk biochar, offering vital criteria for optimizing energy and environmental applications.Open AccessEffect of Thermal Severity on the Structural Evolution and Stability of Rice Husk Biochar
This study evaluates the effect of thermal severity on the yield, structural evolution, and stability of biochar produced from rice husk via controlled pyrolysis. The raw biomass, containing 1.67 wt% moisture, 60.94 wt% volatiles, and 21.66-wt% fixed carbon, proved highly suitable for thermochemical conversion. Using a 3 × 3 factorial design (500–700 °C; 30–60 min), variance analysis revealed temperature as the dominant variable (F = 67.15; p < 0.001; = 0.88), alongside a significant temperature time interaction (F = 6.19; p = 0.003). Maximum biochar yield occurred at 500 °C and 60 min (59.4 ± 2.0 wt%), whereas heating to 700 °C reduced yields to 41.8–44.0 wt% via enhanced devolatilization and secondary cracking. Structurally, the biochar developed a predominantly mesoporous matrix with a maximum BET surface area of 56.23 m2/g and ~4.9 nm average pore diameters. Furthermore, FTIR and DSC analyses demonstrated that higher thermal severity reduced oxygen-containing functional groups while increasing thermal stability and aromatic reorganization. Ultimately, 700 °C (at the 45 min residence time evaluated for porosimetry) provided the greatest structural development (maximum BET surface area), while 700 °C/60 min provided the highest thermal-oxidative stability, and lower severities favored biochar yield, revealing a trade-off between mass recovery and structural/stability performance. These findings establish that thermal severity dictates the physicochemical evolution of rice husk biochar, offering vital criteria for optimizing energy and environmental applications.