MMManuel S. Páez Meza

Manuel S. Páez Meza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Manuel S. Páez Meza has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    An Experimentally Constrained Open-Source Framework for Biomass Pyrolysis: TGA-Informed Ranzi Kinetics Implemented in DWSIM

    by Jesús D. Rhenals-Julio, Luis F. Hernández Contreras, Rafael D. Gómez Vásquez, Jorge M. Mendoza Fandiño, Antonio J. Bula Silvera, Dairo E. Pérez Sotelo, Manuel S. Páez Meza

    Pyrolysis is a leading route for valorizing lignocellulosic residues, yet detailed multi-step kinetic schemes have so far been deployed only in costly commercial simulators, limiting reproducibility. This work couples thermogravimetric (TGA) characterization with process simulation in the free, open-source simulator DWSIM to predict the pyrolysis product distribution of corn cob from Córdoba, Colombia. The lignocellulosic composition (hemicellulose 24.3 ± 2.9, cellulose 36.4 ± 3.0, lignin 39.3 ± 0.9 wt%) was obtained by deconvolving the derivative thermogravimetric (DTG) curve with a five-parameter asymmetric double sigmoidal (Asym2sig) function (R2 > 0.9996). Pseudocomponent activation energies from the Coats–Redfern method (154.2, 124.6, and 29.9 kJ/mol) calibrated the primary reactions of a 17-reaction Ranzi scheme, extended with 18 secondary gas-phase steam reforming reactions. Validated against eight lignocellulosic biomasses, the calibrated model yielded a consolidated R2 = 0.853 and average absolute deviation (AAD) = 9.8%, with char predictions most accurate (AAD = 8.9%). For corn cob, a bio-oil-optimized yield of 55.0 wt% was predicted at 500 °C, transitioning to a syngas-rich regime (51.0 wt% gas) at 750 °C. This constitutes the calibrated Ranzi-scheme implementation in DWSIM, offering an accessible, reproducible pathway for biomass pyrolysis modeling.


  • Open Access

    Effect of Thermal Severity on the Structural Evolution and Stability of Rice Husk Biochar

    by Jesús D. Rhenals Julio, Carlos A. Medellín, Manuel S. Páez, Jorge M. Mendoza, Dairo E. Pérez S., Luis F. Hernández Contreras, Antonio J. Bula Silvera

    This study evaluates the effect of thermal severity on the yield, structural evolution, and stability of biochar produced from rice husk via controlled pyrolysis. The raw biomass, containing 1.67 wt% moisture, 60.94 wt% volatiles, and 21.66-wt% fixed carbon, proved highly suitable for thermochemical conversion. Using a 3 × 3 factorial design (500–700 °C; 30–60 min), variance analysis revealed temperature as the dominant variable (F = 67.15; p < 0.001; ηp2 = 0.88), alongside a significant temperature time interaction (F = 6.19; p = 0.003). Maximum biochar yield occurred at 500 °C and 60 min (59.4 ± 2.0 wt%), whereas heating to 700 °C reduced yields to 41.8–44.0 wt% via enhanced devolatilization and secondary cracking. Structurally, the biochar developed a predominantly mesoporous matrix with a maximum BET surface area of 56.23 m2/g and ~4.9 nm average pore diameters. Furthermore, FTIR and DSC analyses demonstrated that higher thermal severity reduced oxygen-containing functional groups while increasing thermal stability and aromatic reorganization. Ultimately, 700 °C (at the 45 min residence time evaluated for porosimetry) provided the greatest structural development (maximum BET surface area), while 700 °C/60 min provided the highest thermal-oxidative stability, and lower severities favored biochar yield, revealing a trade-off between mass recovery and structural/stability performance. These findings establish that thermal severity dictates the physicochemical evolution of rice husk biochar, offering vital criteria for optimizing energy and environmental applications.

  • Open Access

    Semi-empirical algorithm for estimation of calorimetric properties in binary liquid mixtures from acoustic and volumetric data

    by Manuel S. Páez Meza, Plinio Cantero-López, Dairo E. Pérez Sotelo

    In the present work, a semi-empirical algorithm is proposed for estimating the adiabatic coefficient (γ), the isothermal compressibility (κτ), the heat capacity at constant pressure (cp), and constant volume (cv), for liquid mixtures of organic compounds as a function of temperature and concentration. The algorithm was applied to the binary systems: 1,6-Dichlorohexene (x) + Dodecane (1-x) and 1,5-Dichloropentane (x) + Dodecane (1-x) reported in literature. The obtaining values for γ, cp, cv and κτ are reported at all concentrations and temperatures. The implementation of the algorithm required experimental data of the adiabatic coefficients of the pure components (γi0) to 298.15 K, acoustic and volumetric data of the binary mixture in the entire concentration and temperature range between (278.15–328.15) K every 5 K. The results obtained are in excellent agreement with the experimental results.

  • Thermodynamic Study of Amino Acids in an Aqueous Solution of Calcium Acetate at T = 283.15–308.15 K and Pressure P = 0.1 MPa: A Volumetric Approach

    by Manuel S. Páez Meza, Plinio Cantero-López, Yair A. Vega, Dairo E. Pérez Sotelo, Jennifer Lafont Mendoza, Luis A. Alcalá