Jumaeda Jatmika
Research Subjects
Jumaeda Jatmika has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Eka Nurfani
Department of Materials Engineering, Faculty of Industrial Technology, Institut Teknologi Sumatera (ITERA), South Lampung, Indonesia
4 shared publications - Resti Marlina
Research Center for Biomass and Bioproducts
4 shared publications - Suci Winarsih
Research Center for Quantum Physics, National Research and Innovation Agency (BRIN), South Tangerang, 15314, Indonesia
4 shared publications - Nur Istiqomah Khamidy
Department of Materials Engineering, Faculty of Industrial Technology, Institut Teknologi Sumatera (ITERA), Lampung, 35365, Indonesia
3 shared publications - Quratul Aini
Institut Teknologi Sumatera
3 shared publications Rio William Sianturi
3 shared publications
Latest Publications
- 21 September 2026
- Published by Elsevier in Journal of Alloys and Compounds Communications
- Vol. 12
Influence of mineralizers on the phase evolution and surface defect chemistry of hydrothermal MnO2 nanomaterials
- 21 September 2026
- Published by Elsevier in Journal of Alloys and Compounds Communications
- Vol. 12
Influence of mineralizers on the phase evolution and surface defect chemistry of hydrothermal MnO2 nanomaterials
- Open Access
- 18 July 2026
- Published by Elsevier in SSRN Electronic Journal
Influence of Mineralizers on the Phase Evolution and Surface Defect Chemistry of Hydrothermal MnO2 Nanomaterials
This study investigates the role of mineralizer selection in modulating the crystal structure and surface chemical states of manganese dioxide (MnO2) synthesized via a hydrothermal approach. Three oxidants—K2S2O8, KMnO4, and KClO3—were employed as mineralizers, yielding distinct phase evolution and defect concentrations. X-ray Diffraction (XRD) revealed that K2S2O8 and KClO3 favor the β-MnO2 (pyrolusite) phase, while KMnO4 drives a complete phase transition to α-MnO2 (hollandite), with average crystallite sizes ranging from 30.98 to 91.31 nm. High-resolution X-ray Photoelectron Spectroscopy (XPS) deconvolution demonstrated that KClO3 promotes the highest surface defect concentration (Odef/OH ∼ 36.46%) and Mn3+ fraction (∼ 32.44%), which are essential for enhancing faradaic charge storage. Cyclic Voltammetry (CV) measurements in 1 M Na2SO4 revealed that the KClO3-derived MnO2 achieves a maximum specific capacitance of 79.86 ± 9.46 F/g at 10 mV/s, retaining 28.3% of this value at 100 mV/s, significantly outperforming K2S2O8 (40.03 ± 27.43 F/g, 21.6% retention) and KMnO4 (20.77 ± 18.87 F/g, 19.9% retention). These results establish a comprehensive mineralizer–structure–property framework for defect-engineered MnO2 in advanced electrochemical energy storage.
- 18 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInfluence of Mineralizers on the Phase Evolution and Surface Defect Chemistry of Hydrothermal MnO2 Nanomaterials
This study investigates the role of mineralizer selection in modulating the crystal structure and surface chemical states of manganese dioxide (MnO2) synthesized via a hydrothermal approach. Three oxidants—K2S2O8, KMnO4, and KClO3—were employed as mineralizers, yielding distinct phase evolution and defect concentrations. X-ray Diffraction (XRD) revealed that K2S2O8 and KClO3 favor the β-MnO2 (pyrolusite) phase, while KMnO4 drives a complete phase transition to α-MnO2 (hollandite), with average crystallite sizes ranging from 30.98 to 91.31 nm. High-resolution X-ray Photoelectron Spectroscopy (XPS) deconvolution demonstrated that KClO3 promotes the highest surface defect concentration (Odef/OH ∼ 36.46%) and Mn3+ fraction (∼ 32.44%), which are essential for enhancing faradaic charge storage. Cyclic Voltammetry (CV) measurements in 1 M Na2SO4 revealed that the KClO3-derived MnO2 achieves a maximum specific capacitance of 79.86 ± 9.46 F/g at 10 mV/s, retaining 28.3% of this value at 100 mV/s, significantly outperforming K2S2O8 (40.03 ± 27.43 F/g, 21.6% retention) and KMnO4 (20.77 ± 18.87 F/g, 19.9% retention). These results establish a comprehensive mineralizer–structure–property framework for defect-engineered MnO2 in advanced electrochemical energy storage.
- Open Access
- 14 July 2026
- Published by Elsevier in SSRN Electronic Journal
Influence of Mineralizers on the Phase Evolution and Surface Defect Chemistry of Hydrothermal MnO2 Nanomaterials
This study investigates the role of mineralizer selection in modulating the crystal structure and surface chemical states of manganese dioxide (MnO2) synthesized via a hydrothermal approach. Three oxidants—K2S2O8, KMnO4, and KClO3—were employed as mineralizers, yielding distinct phase evolution and defect concentrations. X-ray Diffraction (XRD) revealed that K2S2O8 and KClO3 favor the β-MnO2 (pyrolusite) phase, while KMnO4 drives a complete phase transition to α-MnO2 (hollandite), with average crystallite sizes ranging from 30.98 to 91.31 nm. High-resolution X-ray Photoelectron Spectroscopy (XPS) deconvolution demonstrated that KClO3 promotes the highest surface defect concentration (Odef/OH ∼ 36.46%) and Mn3+ fraction (∼ 32.44%), which are essential for enhancing faradaic charge storage. Cyclic Voltammetry (CV) measurements in 1 M Na2SO4 revealed that the KClO3-derived MnO2 achieves a maximum specific capacitance of 79.86 ± 9.46 F/g at 10 mV/s, retaining 28.3% of this value at 100 mV/s, significantly outperforming K2S2O8 (40.03 ± 27.43 F/g, 21.6% retention) and KMnO4 (20.77 ± 18.87 F/g, 19.9% retention). These results establish a comprehensive mineralizer–structure–property framework for defect-engineered MnO2 in advanced electrochemical energy storage.
- 14 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInfluence of Mineralizers on the Phase Evolution and Surface Defect Chemistry of Hydrothermal MnO2 Nanomaterials
This study investigates the role of mineralizer selection in modulating the crystal structure and surface chemical states of manganese dioxide (MnO2) synthesized via a hydrothermal approach. Three oxidants—K2S2O8, KMnO4, and KClO3—were employed as mineralizers, yielding distinct phase evolution and defect concentrations. X-ray Diffraction (XRD) revealed that K2S2O8 and KClO3 favor the β-MnO2 (pyrolusite) phase, while KMnO4 drives a complete phase transition to α-MnO2 (hollandite), with average crystallite sizes ranging from 30.98 to 91.31 nm. High-resolution X-ray Photoelectron Spectroscopy (XPS) deconvolution demonstrated that KClO3 promotes the highest surface defect concentration (Odef/OH ∼ 36.46%) and Mn3+ fraction (∼ 32.44%), which are essential for enhancing faradaic charge storage. Cyclic Voltammetry (CV) measurements in 1 M Na2SO4 revealed that the KClO3-derived MnO2 achieves a maximum specific capacitance of 79.86 ± 9.46 F/g at 10 mV/s, retaining 28.3% of this value at 100 mV/s, significantly outperforming K2S2O8 (40.03 ± 27.43 F/g, 21.6% retention) and KMnO4 (20.77 ± 18.87 F/g, 19.9% retention). These results establish a comprehensive mineralizer–structure–property framework for defect-engineered MnO2 in advanced electrochemical energy storage.
- Open Access
- 7 July 2026
- Published by Elsevier in Next Materials
- Vol. 13
Structural, optical, and electrical properties of Cu-doped NiO films synthesized by spray pyrolysis for potential gas sensing applications
- 7 July 2026
- Published by Elsevier in Next Materials
- Vol. 13
Open AccessStructural, optical, and electrical properties of Cu-doped NiO films synthesized by spray pyrolysis for potential gas sensing applications
- Open Access
- 10 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (18)
Hopping mechanism and Griffiths singularity in La0.7Ca0.25Sr0.05MnO3/Mn3O4 composite nanoparticles
This study investigates the electronic and magnetic properties of La0.7Ca0.25Sr0.05MnO3/Mn3O4 composite nanoparticles, focusing on the interplay between charge transport mechanisms and magnetic fluctuations. The composite nanoparticles exhibit a transition from paramagnetic to ferromagnetic behavior with Curie temperatures (TC) of 276.2, 272.2, and 274.2 K for particle sizes of 28, 30, and 32 nm, respectively. Electrical resistivity measurements indicate that hopping conduction dominates electron transport, with variable-range hopping (VRH) providing a more accurate description of the conduction mechanism than the Arrhenius nearest-neighbor hopping model. The nanoscale magnetic clusters induced by the Griffiths phase persist above TC, introducing magnetic fluctuations that deviate from the classical Curie–Weiss law. These fluctuations significantly influence both the magnetization and transport properties by creating magnetic inhomogeneity and enhancing charge localization. The coupling between the Griffiths phase and VRH conduction suggests that these materials could have potential for applications in areas such as spintronics and other electronic technologies.
- 10 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (18)
Open AccessHopping mechanism and Griffiths singularity in La0.7Ca0.25Sr0.05MnO3/Mn3O4 composite nanoparticles
This study investigates the electronic and magnetic properties of La0.7Ca0.25Sr0.05MnO3/Mn3O4 composite nanoparticles, focusing on the interplay between charge transport mechanisms and magnetic fluctuations. The composite nanoparticles exhibit a transition from paramagnetic to ferromagnetic behavior with Curie temperatures (TC) of 276.2, 272.2, and 274.2 K for particle sizes of 28, 30, and 32 nm, respectively. Electrical resistivity measurements indicate that hopping conduction dominates electron transport, with variable-range hopping (VRH) providing a more accurate description of the conduction mechanism than the Arrhenius nearest-neighbor hopping model. The nanoscale magnetic clusters induced by the Griffiths phase persist above TC, introducing magnetic fluctuations that deviate from the classical Curie–Weiss law. These fluctuations significantly influence both the magnetization and transport properties by creating magnetic inhomogeneity and enhancing charge localization. The coupling between the Griffiths phase and VRH conduction suggests that these materials could have potential for applications in areas such as spintronics and other electronic technologies.
- Open Access
- 12 October 2025
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- p. 2875
Synergistic Ni-Co interaction and phase control in bimetallic catalyst for ethanol electrooxidation reaction
In this study, bimetallic nickel-cobalt electrocatalysts with different Ni:Co ratios were electrodeposited onto indium tin oxide substrates coated by polyethylene terephthalate and evaluated as cost-effective catalysts for ethanol electrooxidation reaction. The physical features of the catalysts were studied using X-ray diffraction (XRD), Raman spectroscopy and field-emission scanning electron microscopy, along with energy-dispersive X-ray spectroscopy. XRD analysis revealed a phase transition from a mixed face-cantered cubic (FCC) and hexagonal close-packed structure to a single FCC phase, as the cobalt content decreased. This change in phases greatly affected the shape of the catalyst, changing from a pebbly texture in the mixed-phase samples to a smooth, rounded shape in the single-phase FCC samples. The electrochemical properties and catalytic performance of ethanol oxidation in alkaline medium were investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The tested electrocatalysts revealed that NiCo B having Ni:Co ratio 82:18 possess the best catalytic activity compared to the other catalysts, reaching a current density of 14.82 mA cm-2 for ethanol electrooxidation reaction and showing great stability. This better performance is due to its improved physical structure, which boosts the interaction between nickel and cobalt, and lowers resistance to charge transfer. These findings demonstrate the promise of NiCo as an efficient electrocatalyst for ethanol electrooxidation reaction.
- 12 October 2025
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- p. 2875
Open AccessSynergistic Ni-Co interaction and phase control in bimetallic catalyst for ethanol electrooxidation reaction
In this study, bimetallic nickel-cobalt electrocatalysts with different Ni:Co ratios were electrodeposited onto indium tin oxide substrates coated by polyethylene terephthalate and evaluated as cost-effective catalysts for ethanol electrooxidation reaction. The physical features of the catalysts were studied using X-ray diffraction (XRD), Raman spectroscopy and field-emission scanning electron microscopy, along with energy-dispersive X-ray spectroscopy. XRD analysis revealed a phase transition from a mixed face-cantered cubic (FCC) and hexagonal close-packed structure to a single FCC phase, as the cobalt content decreased. This change in phases greatly affected the shape of the catalyst, changing from a pebbly texture in the mixed-phase samples to a smooth, rounded shape in the single-phase FCC samples. The electrochemical properties and catalytic performance of ethanol oxidation in alkaline medium were investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The tested electrocatalysts revealed that NiCo B having Ni:Co ratio 82:18 possess the best catalytic activity compared to the other catalysts, reaching a current density of 14.82 mA cm-2 for ethanol electrooxidation reaction and showing great stability. This better performance is due to its improved physical structure, which boosts the interaction between nickel and cobalt, and lowers resistance to charge transfer. These findings demonstrate the promise of NiCo as an efficient electrocatalyst for ethanol electrooxidation reaction.
- Open Access
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Effect of cobalt and aluminum doping on the structural and magnetic properties of zinc oxide nanoparticles
A systematic study of the substitution effect of Co and Al on ZnO nanoparticles was carried out by x-ray diffraction (XRD) and transmission electron microscopy and using a superconducting quantum interference device magnetometer to study their structural, morphological, and magnetic properties. Zn1−xMxO (M = Co, Al) at different doping concentrations was prepared using a hydrothermal technique. The XRD results with structural Rietveld refinement reveal that the major phase of all samples had a hexagonal wurtzite crystal structure with a P63mc space group. Hysteresis loops with no magnetic saturation at high fields were analyzed at 2 K in all samples. Zero magnetic remanence and zero coercivity were also examined. The results demonstrated that the magnetic ground state at 2 K in all samples was magnetism with the coexistence of antiferromagnetic, ferromagnetic, and superparamagnetic phases. This behavior persisted at 100 and 300 K in the Al-doped sample, while Co-doped ones exhibited a paramagnetic state only. The role of non-magnetic doping, which leads to the appearance of magnetism in ZnO nanoparticles persisting at high temperatures, is discussed herein.
- 1 April 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (4)
Open AccessEffect of cobalt and aluminum doping on the structural and magnetic properties of zinc oxide nanoparticles
A systematic study of the substitution effect of Co and Al on ZnO nanoparticles was carried out by x-ray diffraction (XRD) and transmission electron microscopy and using a superconducting quantum interference device magnetometer to study their structural, morphological, and magnetic properties. Zn1−xMxO (M = Co, Al) at different doping concentrations was prepared using a hydrothermal technique. The XRD results with structural Rietveld refinement reveal that the major phase of all samples had a hexagonal wurtzite crystal structure with a P63mc space group. Hysteresis loops with no magnetic saturation at high fields were analyzed at 2 K in all samples. Zero magnetic remanence and zero coercivity were also examined. The results demonstrated that the magnetic ground state at 2 K in all samples was magnetism with the coexistence of antiferromagnetic, ferromagnetic, and superparamagnetic phases. This behavior persisted at 100 and 300 K in the Al-doped sample, while Co-doped ones exhibited a paramagnetic state only. The role of non-magnetic doping, which leads to the appearance of magnetism in ZnO nanoparticles persisting at high temperatures, is discussed herein.
- 22 November 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 108 (20) , 205148
High-field magnetization and magnetic phase diagrams for three symmetry axes in single-crystalWe measured high-field magnetization, up to 56 T, in crystallized in -type cubic structure, using a pulse magnet. We observed the conventional metamagnetic transition from antiferromagnetism to field-induced ferromagnetism near 5 T. Magnetic phase diagrams were determined for the , and axes using high quality single crystals, as identified by the detection of the de Haas-van Alphen oscillation. As reported in previous research with polycrystalline samples for mapping the magnetic phase diagram of , two phase boundaries were observed within the antiferromagnetic phase. This structure of the magnetic phase diagram is similar to that of centrosymmetric skyrmion system such as , in which the Ruderman–Kittel–Kasuya–Yosida interaction plays an important role. Our measurements using single crystals revealed that phase boundaries within the antiferromagnetic phase varied depending on magnetic field direction. For magnetization along , a weak, broad shoulder was observed that reached to approximately 15 K, far higher than the 4 K Néel temperature. This single-crystal study resolves the detailed magnetic phase diagrams to three symmetry axes. Mapping the orientation-dependent magnetic phase diagrams supports the magnetic structure determination for each phase and each symmetry axis. The newly mapped orientation-dependent magnetic phase diagrams provide insights that clarify underlying magnetic correlation and plausible skyrmion phase in heavy fermion compound .- 22 November 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 108 (20) , 205148
High-field magnetization and magnetic phase diagrams for three symmetry axes in single-crystalWe measured high-field magnetization, up to 56 T, in crystallized in -type cubic structure, using a pulse magnet. We observed the conventional metamagnetic transition from antiferromagnetism to field-induced ferromagnetism near 5 T. Magnetic phase diagrams were determined for the , and axes using high quality single crystals, as identified by the detection of the de Haas-van Alphen oscillation. As reported in previous research with polycrystalline samples for mapping the magnetic phase diagram of , two phase boundaries were observed within the antiferromagnetic phase. This structure of the magnetic phase diagram is similar to that of centrosymmetric skyrmion system such as , in which the Ruderman–Kittel–Kasuya–Yosida interaction plays an important role. Our measurements using single crystals revealed that phase boundaries within the antiferromagnetic phase varied depending on magnetic field direction. For magnetization along , a weak, broad shoulder was observed that reached to approximately 15 K, far higher than the 4 K Néel temperature. This single-crystal study resolves the detailed magnetic phase diagrams to three symmetry axes. Mapping the orientation-dependent magnetic phase diagrams supports the magnetic structure determination for each phase and each symmetry axis. The newly mapped orientation-dependent magnetic phase diagrams provide insights that clarify underlying magnetic correlation and plausible skyrmion phase in heavy fermion compound .