MBM. P. Brodnikovskyi

M. P. Brodnikovskyi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. P. Brodnikovskyi has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Self-Propagating High-Temperature Synthesis of the Boron Nitride E-Phase

    by O.M. Bloshchanevich, O.V. Pokropivny, V.E. Sheludko, A.O. Burkhan, A.S. Smolyar, D.V. Shchur, N.A. Gavrilyuk, M.P. Brodnikovskyi, A.I. Stegniy

    This paper investigates the synthesis of the boron nitride E-phase (B12N12) using the self-propagating high-temperature synthesis (SHS) method in an air environment. Mixtures of amorphous boron and boric acid (H3BO3) with mass ratios ranging from 5:1 to 1:2 were used as precursors. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed that the E-phase stably forms as the primary crystalline component, regardless of the initial precursor ratios. The experimental cubic lattice parameter was calculated to be a = 10.764 Å, which aligns closely with theoretical values. Experimental testing demonstrated that the synthesized B12N12 phase exhibits high thermal stability (up to 900 °C) and maintains its phase composition after prolonged exposure to a magnetic field. Morphological analysis revealed the presence of nonostructural elements and a layered microstructure, typical of the periodic wave-like SHS process, with a surface oxygen content of 9.57-12.92 at.%. Reviews were done on nitrides in nature and the synthesis of the E-phase of boron nitride.

  • Fluid Synthesis of Cubic Graphite

    by A.S. Smolyar, O.V. Pokropivny, S.M. Maloshtan, V.I. Pavlyshyn, V.O. Kuts, V.O. Barkholenko, A.M. Titenko, M.P. Brodnikovsky, V.E. Sheludko, O.M. Bloshchanevich, et al.

    The paper presents X-ray data on the synthesis of cubic graphite and other polymorphic modifications of carbon by the reverse Boudoir reaction by the fluid method (FS, patent of Ukraine) using supercritical CO2 as a fluid and artificial diamond ASM1/0, carbon black, and metal powders as starting materials. Regardless of the type of starting material, cubic graphite was always formed as a result of the synthesis. It is shown that experiments on the fluid synthesis of carbon phases confirm some analogy with its formation in natural conditions. The new results expand the picture of the phase formation of carbon structures and fit into the framework of the proposed new model. The carbon phase cubic graphite (Gc) under conditions of fluid supercritical synthesis in a CO2 environment is easily formed (more than 50 samples were obtained from experiments with its inclusion) from many carbon compounds as starting materials. Two possible models of the phase structure are considered — as SCF-С24 and C96. In high gas pressure equipment at P less than 1 GPa (less than 104 atmospheres) and T less than 1000ºС, cubic graphite of varying degrees of perfection was obtained in many experiments. Carbon dioxide CO2 was used as a supercritical fluid at various parameters of pressure, temperature and time. The schematic diagram of the experimental equipment for fluid synthesis is presented in many of our published works. One of the synthesized samples, obtained using magnesium, is a carbon material with cubic graphite and exhibits the largest number of clear lines in X-ray patterns of all the starting substances we used: 3.28а, 3.24а, 3.16а, 2.88а, 2.51а, 2.46а, 1.970а, 1.914а, 1.635а, 1.467а. The carbon phase cubic graphite is a stable modification of carbon.


  • Open Access

    Physico-Chemical Features of Producing High-Temperature Strength Niobium Nb-Ti-Al-Cr-Mo System Alloys by Melting and the Powder Metallurgy Method

    by M.V. Marych, M.P. Brodnikovsky, G.A. Bagliuk, T.L. Kuznetsova

    Niobium alloys of the Nb-Ti-Al system are one of the most promising alloys in the rocket and space industry, especially alloys with a low specific gravity (≤ 7g/cm3), which have a yield strength at 1000 °C of not less than 500 MPa. Our studies have established the possibility of creating promising cast heat-resistant alloys of this system, and a promising heat-resistant alloy 57Nb-10Cr-5Al-21Ti-7Mo (at. %), which meets the specified requirements, was also developed. However, the large crystallization interval of cast alloys of this system, the thermophysical features of their crystallization cause the possibility of the formation of dendritic structures, the development of dendritic liquation and segregation, and the tendency to the formation of crystallization cracks, which reduces the operational characteristics of cast alloys. In this regard, there was a need to investigate the possibilities of obtaining these alloys by the powder metallurgy method. The article presents the results of a study of the influence of the production technology and the main technological parameters on the structural features and mechanical properties of the promising heat-resistant alloy 57Nb-10Cr-5Al-21Ti-7Mo (%, at.), obtained by the melting method and by two promising powder metallurgy technological schemes. The possibility of obtaining a homogeneous fine-crystalline alloy 57Nb-10Cr-5Al-21Ti-7Mo (at. %) with strength equal to that of the cast alloy by the powder metallurgy method using both open hot forging of billets from a mixture of powders at a temperature of 1200 °C with annealing at 1600 °C in vacuum (the first technological scheme), and the second vacuum-technological scheme – after sintering at 1600 °C of billets from a mixture of powders and thermoplastic compression deformation in vacuum has been established. The use of hot thermomechanical processing of sintered blanks at relatively low temperatures (1200 °C) in the range of solid-phase reactions provides materials with high dispersion of the structure and a high degree of homogeneity. The possibility of creating a composite material, the regularities of its dissolution during the annealing process, which allow controlling the processes of porosity formation and grain sizes of the alloy (57Nb-21Ti-5Al-10Cr-7Mo) at. % when obtained by the powder metallurgy method, is shown. Ніобієві сплави системи Nb-Ti-Al є одними з найбільш перспективних сплавів ракетно-космічної сфери, особливо сплави з низькою питомою вагою (≤ 7г/см3), що мають межу плинності при 1000 °С не нижче 500 МПа. У наших дослідженнях була встановлена можливість створення перспективних литих жароміцних сплавів даної системи, а також був розроблений перспективний жароміцний сплав 57Nb-10Cr-5Al-21Ti-7Mo (ат. %), який відповідає вказаним вимогам. Проте великий інтервал кристалізації литих сплавів даної системи, теплофізичні особливості їх кристалізації спричиняють можливість утворення дендритних структур, розвиток дендритної ліквації та сегрегації, схильність до утворення кристалізаційних тріщин, що знижує експлуатаційні характеристики литих сплавів. У зв’язку з цим, виникла необхідність дослідити можливості отримання даних сплавів методом порошкової металургії. В статті наведено результати дослідження впливу технології отримання та основних технологічних параметрів на особливості структури та механічні властивості перспективного жароміцного сплаву 57Nb-10Cr-5Al-21Ti-7Mo (%, ат.), отриманого методом плавки та по двох перспективних технологічних схемах порошкової металургії. Встановлено можливість одержання гомогенного дрібнокристалічного сплаву 57Nb-10Cr-5Al-21Ti-7Mo (ат. %) з міцністю нарівні показників литого сплаву методом порошкової металургії з використанням як відкритого гарячого штампування заготовок із суміші порошків при температурі 1200 °С з відпалом при 1600 °С у вакуумі (перша технологічна схема), так і при другій вакуумно-технологічній схемі — після спікання при 1600 °С заготовок із суміші порошків і термопластичної деформації на стиск у вакуумі. Застосування гарячої термомеханічної обробки спечених заготовок при відносно низьких температурах (1200 °С) в діапазоні твердофазних реакцій забезпечує отримання матеріалів з високою дисперсністю структури та високим ступенем гомогенності. Показано можливість створення композиційного матеріалу, закономірності його...

  • High-temperature properties of ZrB2–HfB2 and ZrB2–HfB2–SiC solid solutions

    by D. V. Vedel, P. V. Mazur, І. V. Kozak, А. Ye. Osipov, М. P. Brodnikovskyi

    Solid (ZrxHf1–х)B2 and (ZrxHf1–х)B2–15 vol.% SiC composites were obtained by hot pressing. It was shown that the formation of homogeneous solid solution occurs at an equimolar ratio. The coreshell structure was formed in composite with 25 and 75 at.% HfB2. In the first case, the core was pure zirconium diboride, and in the second – pure hafnium diboride. The shell composition corresponded to the chemical formula (Zr0.75Hf0.25)B2 or (Zr0.25Hf0.75)B2, respectively. The formation of an equimolar solid solution results in a 28% increase in high temperature bending strength in comparison to ZrB2–15 vol.% SiC or HfB2–15 vol.% SiC. At the same time, high oxidation resistance is observed in a solid solution close to hafnium diboride due to the formation of the (Hf0.75Zr0.25)SiO4 and HfSiO4 phases on the scale surface, which reduce the diffusion of oxygen into the material

  • High-temperature properties of ZrB2-HfB2 and ZrB2-HfB2-SiC solid solutions

    by D. V. Vedel, P. V. Mazur, I. V. Kozak, A. Ye. Osipov, M. P. Brodnikovskyi

  • Open Access

    Obtaining а homogeneous high-temperature strength alloy (Nb-21Ti-5Al-10Cr-7Mo) at. % by pressing and sintering a mixture of powders

    by M.P. Brodnikovsky, G. A. Bagliuk, M.V. Marych, T.L. Kuznetsova, O.A. Rokytska, S.A. Kulakov

    Multicomponent high temperature strength alloys of the Nb-Ti-Al system, alloyed with Cr, Zr, Mo and Si, with a specific gravity of 6.3 - 7.4 g/cm3, have proven extremely promising in aviation and space technology. However, their physical and chemical features are associated with the high activity of the components, with a significant difference in melting temperatures (from Tmel. Mo – 2617 °C to Tmel. Al – 660 °C) and different specific gravity (from 10.2 g/cm3- Mo up to 2.7 g/cm3- Al), is a big problem for their production. The long crystallization interval of cast alloys of this system, thermophysical features of their crystallization, determine the possibility of formation of dendritic structures, the development of dendritic liquation and segregation of low- or high-temperature intermetallics and eutectics, the tendency to the formation of crystallization cracks, which reduces the operational characteristics of cast alloys. In this regard, it became necessary to investigate the possibilities of obtaining an alloy by the method of powder metallurgy. The purpose of this work was to obtain a homogeneous alloy, to study changes in the grain structure, phase transformations and mechanical properties of the material at various stages of processing in the process of obtaining a homogeneous alloy structure by powder metallurgy methods. The need to protect powder components from oxidation, formation of nitrides, carbides during technological operations at temperatures above 200 °C (high-purity argon) has been established. The optimal duration of intensive grinding of a mixture of powders and granules of raw materials has been worked out, which makes it possible to control the uniformity of the size of the particles of the mixture components, porosity and homogeneity of the alloy. The optimal duration of grinding is 30 minutes, during which the most homogeneous mixture in terms of particle size is formed. The optimal annealing mode was established, which ensures the achievement of homogenization of the alloy, phase transformations at the boundaries of the contact of component particles, and changes in grain sizes. Microstructural and X-ray structural analysis of the samples was carried out, their microhardness and grain dispersion were determined. Keyword: high-temperature strength niobium alloys, physical and chemical features, powder metallurgy, homogeneity, microstructure, mechanical properties, phase composition.


  • ELECTRONIC STATES DENSITY, RESISTIVITY, AND PHASE COMPOSITION OF CaTiO3 PEROVSKITE WITH ISOMORPHIC IMPURITY OF NIOBIUM

    by O.M. Ponomarenko, L.M. Stepanyuk, A.S. Smolyar, A.O. Burkhan, O.M. Bloshchanevich, A.I. Stegniy, V.L. Bekenev, A.V. Stepanenko, V.G. Khomenko, M.P. Brodnikovskyy, et al.