Krzysztof Kłos has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    GHz-bandwidth InAs/InAsSbP barrier infrared detectors for the 3.0–3.7 μ m spectral region operating at room temperature

    by Grzegorz Gomółka, Krzysztof Kłos, Jarosław Pawluczyk, Maciej Kowalczyk, Piotr Martyniuk, Łukasz A. Sterczewski

    The demand for fast mid-wave infrared photodetectors is fueled by high-rate free-space optical communication and optical frequency comb spectroscopy. To date, only a few multi-GHz photodetectors have shown sensitive room-temperature operation in the 3.0–3.7 μm band, yet their commercial availability remains scarce. In this work, we present the remarkable response speed of an InAs/InAsSbP p-Bp-i-n barrier detector based on a p-InAsSbP/n-InAs heterostructure—a technological platform typically not associated with high-frequency operation. A weakly reverse-biased photodiode with a diameter of 121 μm achieves a −3 dB electrical bandwidth of 2.4 GHz and −20 dB bandwidth of 8.0 GHz. This is the best result in this class of mid-infrared photodetectors confirmed optically. High signal-to-noise photodetection is also demonstrated at frequencies exceeding 19 GHz. The relatively simple device structure (devoid of cascaded structure or type-II superlattice) was realized on the mature InAs material platform, which opens new perspectives for accessible, sensitive, multi-GHz photodetectors for the 3.0–3.7 μm spectral region.

  • Passivation of AlGaSb/InGaAsSb/GaSb SWIR Detectors by Aqueous (NH 4 ) 2 S Solution, SiO 2 , and Ionic Liquid Encapsulation

    by Jarosław Pawluczyk, Oskar ŚlęZak, Krzysztof Murawski, Kinga Majkowycz, Piotr Baranowski, Krzysztof Kłos, Tetiana Manyk, Małgorzata Nyga, Jarosław Rutkowski, Piotr Martyniuk

    We report on the development of a passivation technology for InGaAsSb nBp photodiodes incorporating an AlGaSb barrier, aimed at achieving bulk-limited leakage currents and enhanced detectivity in detectors with a photosensitive area of 0.01mm2. Following passivation with SiO2 preceded by sulfidation, an increased yield of 113- $\mu $ m-diameter diodes exhibiting improved zero-bias resistance ( ${R}_{{0}}\text {)}$ was observed, particularly at lower temperatures reachable with thermoelectric coolers. At 215K, the dark current of devices of this size, with ${R}_{{0}}$ close to the average, was reduced by two orders of magnitude. At this temperature, the volume and surface generation rates of carriers were found to be equal for diodes with an average size of $150~\mu $ m. Furthermore, we investigated alternative approaches, including backside illumination through the GaSb substrate, the integration with immersion optics, and the use of ionic liquid (IL)-based passivation technique.

  • Open Access

    Passivation of MWIR Heterostructure p-InAsSbP/n-InAs Photodiodes Using SiO2 Layers for Near-Room-Temperature Operation

    by Jarosław Pawluczyk, Krzysztof Kłos, Oskar Ślęzak, Kinga Majkowycz, Krzysztof Murawski, Tetiana Manyk, Jarosław Rutkowski, Piotr Martyniuk

    We examined the effect of SiO2 passivation on the parameters of mesa heterostructure InAs/InAsSbP photodiodes with a spectral responsivity 50% cut off at 3.5 µm at 295 K, specific to the InAs absorber layer. The R0A product was found to increase by 30% after passivation of the devices of 113 µm in diameter, up to 0.9 Ωcm2, while for those with a diameter of 1.13 mm, R0A of 2.2 Ωcm2 was achieved, with a value of D* > 3 × 109 cmHz1/2/W at the peak of the spectrum, 1 kHz, 0 V bias, 295 K. To the best of our knowledge, this is the highest R0A value at room temperature reported to date for a photodiode with an InAs absorber.

  • Open Access

    Effect of Multiplication and Charge Layers on the Gain in InGaAsSb/AlGaAs Avalanche Photodiodes at Room Temperature

    by Tetiana Manyk, Jarosław Rutkowski, Krzysztof Kłos, Nathan Gajowski, Sanjay Krishna, Piotr Martyniuk

    This paper presents a theoretical analysis of npBp infrared (IR) barrier avalanche photodiode (APD) performance operating at 300 K based on a quaternary compound made of AIIIBV—InGaAsSb, lattice-matched to the GaSb substrate with a p-type barrier made of a ternary compound AlGaSb. Impact ionization in the multiplication layer of InGaAsSb separate absorption, grading, charge, and multiplication avalanche photodiodes (SAGCM APDs) was studied using the Crosslight Software simulation package APSYS. The band structure of the avalanche detector and the electric field distribution for the multiplication and absorption layers were determined. The influence of the multiplication and charge layer parameters on the impact multiplication gain and the excess noise factor was analyzed. It has been shown that with the decrease in the charge layer doping level, the gain and the breakdown voltage increase, but the punch-through voltage decreases, and the linear range of the APD operating voltages widens. The multiplication layer doping level slightly affects the detector parameters, while increasing its width, the photocurrent and the breakdown voltage also increase. The detector structure proposed in this work allows us to obtain a comparable gain and lower dark currents to the APD detectors made of InGaAsSb previously presented in the literature. The performed simulations confirmed the possibility of obtaining APDs with high performance at room temperatures made of InGaAsSb for the SWIR range.


  • Open Access

    Theoretical Study of Quaternary nBp InGaAsSb SWIR Detectors for Room Temperature Condition

    by Tetiana Manyk, Jarosław Rutkowski, Małgorzata Kopytko, Krzysztof Kłos, Piotr Martyniuk

    This paper presents a theoretical analysis of an nBp infrared barrier detector’s performance intended to operate at a room temperature (300 K) based on AIIIBV materials—In1-xGaxAsySb1−y quaternary compound—lattice-matched to the GaSb substrate with a p-n heterojunction ternary Al1−xGaxSb barrier. Numerical simulations were performed using a commercial Crosslight Software—package APSYS. The band structure of the nBp detector and the electric field distribution for the p-n heterojunction with and without a potential barrier were determined. The influence of the barrier-doping level on the detector parameters was analyzed. It was shown that Shockley-Read-Hall (SRH) recombination plays a decisive role in carrier transport for lifetimes shorter than 100 ns. The influence of the absorber/barrier thickness on the detector’s dark current density and photocurrent was investigated. It was shown that valence band offset does not influence the device’s performance. The quantum efficiency reaches its maximum value for an absorber’s thickness of ~3 μm. The performed simulations confirmed the possibility of the detector’s fabrication exhibiting high performance at room temperature based on quaternary compounds of AIIIBV materials for the short wavelength infrared range.


  • Open Access

    Quasi-planar InGaAsSb p-B-n photodiodes for spectroscopic sensing

    by L. A. Hanks, Katarina Mamic, Krzysztof Klos, Andrew Bainbridge, Josh Fletcher, Lindsay Gilder, Lucy Tedstone, Fernando Castano, A. R. J. Marshall

    An InGaAsSb p-B-n structure has been designed and characterized for zero bias low power detection applications. Devices were grown by molecular beam epitaxy and fabricated into quasi-planar photodiodes with a 2.25 µm cut-off wavelength. Maximum responsivity was measured to be 1.05 A/W at 2.0 µm, achieved at zero bias. D* of 9.4 × 1010 Jones was determined from room temperature spectra of noise power measurements with calculated D* remaining >1 × 1010 Jones up to 380 K. With a view to simple miniaturized detection and measurement of low concentration biomarkers, optical powers down to 40 pW were detected, without temperature stabilization or phase-sensitive detection, indicating the photodiode’s potential.


  • Limits of In-Situ Reflectance for growth rate extraction in Aixtron Multi-Wafer Reactors

    by Krzysztof Klos, Mac Benedict, Quangang Du, Hairong Yuan, Haijiao Bian, Kanakaraju Subramaniam