RZRawad Zgheib

Rawad Zgheib

*This is an algorithmically generated author record based on publicly available information.

Rawad Zgheib has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Implementation of Deep Reinforcement Learning for Model-Free Switching and Control of a 23-Level Single DC Source Hybrid Packed U-Cell (HPUC) Converter

    by Pouria Qashqai, Mohammad Babaie, Rawad Zgheib, Kamal Al-Haddad

    This paper proposes a novel Deep Reinforcement Learning (DRL) method for controlling a 23-level Single DC Source Hybrid Packed U-Cell (HPUC) converter. The HPUC topology generates a high number of voltage levels with minimal components but presents control challenges due to its numerous switching states and dynamic charging behavior. Unlike conventional control methods, which require accurate models and are sensitive to noise and parameter mismatches, DRL offers a model-free and resilient approach to the non-linear control of such complex systems. A Deep Q-Network (DQN) agent which is inherently model-free and suited for high-dimensional state spaces and discrete action spaces, is employed to address these issues. To validate the proposed method, simulations were conducted in the MATLAB/Simulink environment. The obtained results demonstrated the satisfactory performance of the proposed DRL method, achieving a Total Harmonic Distortion (THD) of 2.71% in the output current under steady-state, maintaining stable capacitor voltage balancing, and exhibiting rapid dynamic response (e.g., settling within approximately 40 ms for current step changes). Furthermore, its resilience was highlighted by its ability to maintain control despite a 25dB SNR noise condition and up to 15% variations in capacitor values.


  • Open Access

    Z Packed U-Cell Modular Multilevel Converter for STATCOM Applications

    by Sandy Atanalian, Fadia Sebaaly, Rawad Zgheib, Kamal Al-Haddad

    The Modular Multilevel Converter (MMC) is a promising topology for STATCOM applications due to its key features, such as modularity, scalability, and reduced harmonic content. Increasing the number of voltage levels in MMC reduces harmonics but simultaneously increases the number of submodules (SMs) per arm, leading to larger sizes and higher costs, which presents a challenge. To address this, this article introduces a novel 17-level MMC-STATCOM based on the Z Packed U-Cell (ZPUC) converter as its SM, which enables the generation of more voltage levels with fewer components and reduced harmonic content, offering significant advantages in terms of size and cost. Given the complex structure of the proposed converter and the associated challenges in building a physical prototype, real-time (RT) simulation using FPGA technology is employed for validation. The key contributions include integrating the ZPUC-SM into a three-phase STATCOM for the first time and adapting the converter model and its control system to RT tools, including RT-LAB with an electric hardware solver for FPGA execution. In addition, capacitor voltage balancing and energy sorting algorithms are integrated within Phase-Shift Pulse Width Modulation, eliminating the need for an additional controller while maintaining the floating capacitors of ZPUC-SMs balanced and regulated. The specifications of the proposed converter are defined, the mathematical model and control system are derived, and a real-time implementation based on CPU and FPGA execution is built to verify the scheme. The obtained RT simulation results provide practical evidence confirming the effective operation of the proposed scheme in VAR compensation mode.

  • Open Access

    Real-Time Implementation of Three-Phase Z Packed U-Cell Modular Multilevel Grid-Connected Converter Using CPU and FPGA

    by Sandy Atanalian, Fadia Sebaaly, Rawad Zgheib, Kamal Al-Haddad

    The Modular Multilevel Converter (MMC) is a promising converter for medium-/high voltage applications due to its various features. The waveform quality could be enhanced further by expanding the number of generated voltage levels, which increases the number of submodules (SMs); however, this improvement enlarges the size and cost of the converter, posing a persistent challenge. Hence, there exists a trade-off between power quality and the size and complexity of the converter. To verify the performance of such a complex converter and to validate the effectiveness of the control system, especially in the absence of a physical system, Real-Time (RT) simulation becomes crucial. However, the large number of components of a MMC creates important numerical challenges and computational difficulties in RT simulation. This paper proposes a grid-connected MMC employing a Z Packed U-Cell converter as a SM to generate a higher number of voltage levels while minimizing the required number of SMs. The ZPUC-MMC is implemented on an FPGA-based RT simulation platform using Electric Hardware Solver to reduce computational burden and simulation time, while improving the accuracy of the obtained results. Conventional controllers of MMCs are applied to assess the effectiveness and robustness of the proposed system during steady-state and dynamic operations.


  • Modeling and Assessment of Cyber Attacks Targeting Converter-Driven Stability of Power Grids With PMSG-Based Wind Farms

    by Hang Du, Jun Yan, Mohsen Ghafouri, Rawad Zgheib, Mourad Debbabi

    In a grid with PMSG-based wind farms, a lack of system strength can cause severe converter-driven instability issues, such as subsynchronous oscillation (SSO). Cyber adversaries can target the wind farm by maliciously changing the system strength observed from the power grid, triggering SSO, and further causing power outages and equipment damage. To understand the threat, this paper proposes a new model of cyber attacks targeting the system strength. Considering the common mitigations required by the operator's regulations, this paper demonstrates that the proposed attack model can trigger rapid SSO propagation by (i) simultaneously compromising the system strength provision for multiple wind farms or (ii) directly disrupting local system strength mitigation. Based on the developed attacks, this paper also presents an anomalous command verification (ACV) module incorporating a novel converter-driven stability assessment. The ACV module is designed to estimate the system strength buffer capacity in response to malicious tripping commands and indicate how close the system is to converter-driven instability. The impacts of attack-triggered SSOs are demonstrated by electromagnetic transient (EMT) simulations on the New England 39-bus system. The considered case studies validate the effectiveness of the proposed converter-driven stability assessment to detect malicious commands targeting the SSO in a timely manner.


  • Modeling Load Redistribution Attacks in Integrated Electricity-Gas Systems

    by Rong-Peng Liu, Xiaozhe Wang, Bo Zeng, Rawad Zgheib

    As the share of gas-fired power generation continues to increase, it is essential to consider integrated electricity-gas systems (IEGSs). However, the development of IEGSs has led to an increased reliance on cyber infrastructures, such as communication systems, which in turn makes IEGSs more susceptible to cyberattacks. This paper investigates the paradigm and stealthy conditions of load redistribution (LR) attacks on IEGSs and pro-poses a bilevel mixed-integer model to identify the most severe LR attack from an economic perspective. Under a mild assumption, we prove that the proposed model does not exclude any possible upper-level attack, which differs from existing models that may yield suboptimal solutions. A modified reformulation and decomposition (R&D) algorithm is developed to solve this model in a master-subproblem framework. Particularly, we design a new subproblem to address potential infeasibility issues in the master problem. Accordingly, two types of cuts are added to the master problem for ensuring algorithm feasibility and solution optimality. Testing results validate the effectiveness of the proposed model and solution method.


  • Open Access

    A Model-Free Switching and Control Method for Three-Level Neutral Point Clamped Converter Using Deep Reinforcement Learning

    by Pouria Qashqai, Mohammad Babaie, Rawad Zgheib, Kamal Al-Haddad

    This paper presents a novel model-free switching and control method for three-level neutral point clamped (NPC) converter using deep reinforcement learning (DRL). In this method, voltage balancing, and selection of optimal switches are achieved using a reward function which is calculated based on various signals measured as observations of the DRL agent. Since the action space is discrete, a deep Q-network (DQN) agent is utilized. DQN is used due to its capability of handling high-dimensional state spaces. In order to highlight its pros and cons, the proposed method is compared with model predictive control (MPC), which is another popular non-linear control method for power electronic converters. The proposed method is evaluated and compared with the MPC method in grid-connected mode using simulations in Matlab/Simulink. To evaluate the practical performance of the DRL method, various experimental results are obtained. The simulation and experimental results demonstrate that the proposed method effectively achieves accurate voltage balancing and ensures steady operation even in the presence of various dynamic changes, including variations in the reference currents and grid voltage. Additionally, the method successfully handles uncertainties, such as sensor measurement noise, and accommodates parameter variations, such as changes in the capacity of the DC-link capacitors and line impedance. The results demonstrate that this method exhibits superior adaptability to real-time changes and uncertainties, delivering more robust performance compared to similar conventional methods like MPC. Thus, this method can be considered a promising approach for intelligent control of power electronic converters, especially when conventional methods such as MPC face challenges in performance and accuracy under severe parameter variations and uncertainties.


  • Three-Phase ZPUC-MMC Grid Connected Converter

    by Sandy Atanalian, Fadia Sebaaly, Saeed Arazm, Rawad Zgheib, Kamal Al-Haddad, Hadi Y. Kanaan

    Modular Multilevel Converter (MMC) is a promising topology that gained lot of interest in medium-voltage grid-connected applications due to its modularity, scalability, and adaptability. Although increasing the number of submodules per arm leads to a higher number of voltage levels and better waveforms quality, the size and then the cost of the converter remains a challenge. Therefore, a trade-off between topology complexity and power quality exists. This paper proposes an MMC based on Z Packed U-Cell converter as Submodule (ZPUC-SM) to generate a higher number of voltage levels with reduced number of SMs. When compared to HB-MMC, this topology features reduced components count for generating the same voltage levels. Thus, the candidate topology is considered to be a promising solution for medium-voltage applications connecting the utility. This paper details the design, modeling and control of ZPUC-MMC operating as a three-phase grid-connected converter. The controller task is to regulate output current to fulfill grid connectivity requirements. A Phase shifted-PWM with an integrated voltage balancing algorithm takes in action of controlling the three-capacitors voltages of each arm. Thus, no additional voltage controllers are required. The performance of the proposed converter along with its control system are validated with MATLAB/SIMULINK, and the simulation results validate the robustness and effectiveness of the proposed control during both steady-state and dynamic operations.


  • Open Access

    New Fast Algorithm for Simultaneous Identification and Optimal Reconstruction of Non Stationary AR Processes with Missing Observations

    by Rawad Zgheib, Gilles Fleury, Elisabeth Lahalle

    This paper deals with the problem of adaptive reconstruction and identification of AR processes with randomly missing observations. A new real time algorithm is proposed. It uses combined pseudo-linear RLS algorithm and Kalman filter. It offers an unbiased estimation of the AR parameters and an optimal reconstruction error in the least mean square sense. In addition, thanks to the pseudo-linear RLS identification, this algorithm can be used for the identification of non stationary AR signals. Moreover, simplifications of the algorithm reduces the calculation time, thus this algorithm can be used in real time applications