Zhengzhou Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zhengzhou Ma has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Ming Cheng
Southeast University
6 shared publications - Wei Hua
Southeast University
5 shared publications - Wei Qin
Southeast University
4 shared publications - Peng Han
ANSYS Inc., San Jose, CA, USA
3 shared publications - Chenchen Zhao
School of Electrical Engineering, Southeast University, Nanjing, China
2 shared publications - Christopher H. T. Lee
Nanyang Technological University
2 shared publications
Latest Publications
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (6) , 8220-8231
Modeling and Analysis of Brushless Doubly-Fed Induction Machine by Magductance
This article aims to theoretically investigate general design and optimization guidance on the short-circuited coils (SCC) modulator in the brushless doubly-fed induction machine (BDFIM). To achieve the target, the concept of magductance is introduced into the SCC modulator. The modulation effect of various rotors on BDFIM performance is directly reflected in the magductance parameter. The modulation effects of the SCC modulator on magnetomotive force (MMF) amplitude and phase are revealed and quantitatively expressed by the magnetic field conversion factor and phase shift. The impacts of various modulator parameters are investigated, and recommendations for their selection are summarized. Based on this, an improved rotor is proposed. Finally, two prototypes are manufactured, and the proposed rotor is validated through analytical calculations and comparisons with existing optimum rotors by finite element analysis (FEA) and experimental results.
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (6) , 8220-8231
Modeling and Analysis of Brushless Doubly-Fed Induction Machine by Magductance
This article aims to theoretically investigate general design and optimization guidance on the short-circuited coils (SCC) modulator in the brushless doubly-fed induction machine (BDFIM). To achieve the target, the concept of magductance is introduced into the SCC modulator. The modulation effect of various rotors on BDFIM performance is directly reflected in the magductance parameter. The modulation effects of the SCC modulator on magnetomotive force (MMF) amplitude and phase are revealed and quantitatively expressed by the magnetic field conversion factor and phase shift. The impacts of various modulator parameters are investigated, and recommendations for their selection are summarized. Based on this, an improved rotor is proposed. Finally, two prototypes are manufactured, and the proposed rotor is validated through analytical calculations and comparisons with existing optimum rotors by finite element analysis (FEA) and experimental results.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 7 (2) , 416-428
Modulation Modes of Promoted Modulators and Their Impacts on Torque of Electrical Machines
This article introduces the vector magnetic circuit theory into the general airgap field modulation theory. Two new modulators, namely magductance and hysteretance, are proposed, and their vector modulation effects in frequency, amplitude, and phase are clarified. The modulation modes — frequency, amplitude, and phase modulations — are defined. They provide new insight into the modulation effects of various modulators. The effects of modulation modes on torque performance are investigated through specific machine cases, with a particular emphasis on phase modulation. Links among modulation modes, behaviors, and results are established, revealing the similarities and differences among modulators. Guidance on modulator applications is, thus, developed and demonstrated. The effectiveness of the proposed study is verified through finite element analysis and experiments.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
- Vol. 7 (2) , 416-428
Modulation Modes of Promoted Modulators and Their Impacts on Torque of Electrical Machines
This article introduces the vector magnetic circuit theory into the general airgap field modulation theory. Two new modulators, namely magductance and hysteretance, are proposed, and their vector modulation effects in frequency, amplitude, and phase are clarified. The modulation modes — frequency, amplitude, and phase modulations — are defined. They provide new insight into the modulation effects of various modulators. The effects of modulation modes on torque performance are investigated through specific machine cases, with a particular emphasis on phase modulation. Links among modulation modes, behaviors, and results are established, revealing the similarities and differences among modulators. Guidance on modulator applications is, thus, developed and demonstrated. The effectiveness of the proposed study is verified through finite element analysis and experiments.
- 10 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (1) , 1577-1591
Field-Modulation Electrical Machines: Origin, Unification, and Development
The air-gap field harmonics were considered to undermine the performance of electrical machines for more than a century. Since the proposal of general air-gap field-modulation theory (GAFMT) in 2017, the magnetic field-modulation effect (MFME) has received unprecedented attention. Harmonics are proven to be no longer a hindrance, but a benefit by artificial design. Accompanied field-modulation electrical machines (FMEMs) that work relying on harmonics are becoming increasingly popular and expected to satisfy the hunger for high torque and high efficiency simultaneously in the modern industry. In this review, the development histories of FMEMs, with particular reference to brushless doubly fed machines (BDFMs), coaxial magnetic gears (CMGs) and magnetically geared machines (MGMs), permanent magnet Vernier (PMV) machines, and stator-PM machines, are presented. Then, the necessity of proposing the GAFMT for harmonic usage is highlighted. The latest developments of FMEMs, including theoretical, technological, and application aspects, are systemically analyzed. Finally, challenges to be addressed are discussed.
- 10 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (1) , 1577-1591
Field-Modulation Electrical Machines: Origin, Unification, and Development
The air-gap field harmonics were considered to undermine the performance of electrical machines for more than a century. Since the proposal of general air-gap field-modulation theory (GAFMT) in 2017, the magnetic field-modulation effect (MFME) has received unprecedented attention. Harmonics are proven to be no longer a hindrance, but a benefit by artificial design. Accompanied field-modulation electrical machines (FMEMs) that work relying on harmonics are becoming increasingly popular and expected to satisfy the hunger for high torque and high efficiency simultaneously in the modern industry. In this review, the development histories of FMEMs, with particular reference to brushless doubly fed machines (BDFMs), coaxial magnetic gears (CMGs) and magnetically geared machines (MGMs), permanent magnet Vernier (PMV) machines, and stator-PM machines, are presented. Then, the necessity of proposing the GAFMT for harmonic usage is highlighted. The latest developments of FMEMs, including theoretical, technological, and application aspects, are systemically analyzed. Finally, challenges to be addressed are discussed.
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (1) , 264-278
Exploration of Rotor Topology Evolution Mechanism in the Stator-PM Machines
During the optimization of rotor configurations in the flux-switching permanent magnet (FSPM) machine, the contradiction between the pulsating torque suppression and the average torque improvement is a challenging aspect to be addressed. Accompanied by it is the absence of theoretical guidance on rotor design according to torque performance requirements. To address them, by virtue of general airgap field modulation theory (GAFMT), this paper focuses on investigating rotor topology evolution mechanisms that is not only applicable to FSPM machine, but also to flux-reversal PM (FRPM) machine and doubly-salient PM (DSPM) machine. The study proceeds with an analysis of impacts of PM placements on the rotor configurations in 12-stator-slot/10-rotor-pole stator-PM machines. Subsequently, a two-dimensional fast Fourier transformation (2D FFT) is employed to elucidate the trade-off between the increase of average torque and the decrease of pulsating torque. Thirdly, the concept of amplitude modulation is introduced, and under its guidance, two rotor configurations are designed according to their respective objective functions. Multiobjective optimization (MOP) is then applied to enhance the torque performance and evaluate the effectiveness of rotor topologies. Finally, the rotor topology evaluation mechanism of stator-PM machines is verified through finite element analysis (FEA) and experimental results, specifically in the case of FSPM machines.
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (1) , 264-278
Exploration of Rotor Topology Evolution Mechanism in the Stator-PM Machines
During the optimization of rotor configurations in the flux-switching permanent magnet (FSPM) machine, the contradiction between the pulsating torque suppression and the average torque improvement is a challenging aspect to be addressed. Accompanied by it is the absence of theoretical guidance on rotor design according to torque performance requirements. To address them, by virtue of general airgap field modulation theory (GAFMT), this paper focuses on investigating rotor topology evolution mechanisms that is not only applicable to FSPM machine, but also to flux-reversal PM (FRPM) machine and doubly-salient PM (DSPM) machine. The study proceeds with an analysis of impacts of PM placements on the rotor configurations in 12-stator-slot/10-rotor-pole stator-PM machines. Subsequently, a two-dimensional fast Fourier transformation (2D FFT) is employed to elucidate the trade-off between the increase of average torque and the decrease of pulsating torque. Thirdly, the concept of amplitude modulation is introduced, and under its guidance, two rotor configurations are designed according to their respective objective functions. Multiobjective optimization (MOP) is then applied to enhance the torque performance and evaluate the effectiveness of rotor topologies. Finally, the rotor topology evaluation mechanism of stator-PM machines is verified through finite element analysis (FEA) and experimental results, specifically in the case of FSPM machines.
- 17 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15457-15466
Analysis of Squirrel Cage Induction Machine Based on the Magductance Modulator
In order to conduct an explicit analysis of the induction machine (IM), the sole magnetic field parameter’s description of short-circuited coils (SCC) modulator is crucial, despite its absence in the literature. This article presents a novel concept of introducing magductance into the SCC, thus referring to the SCC modulator as the magductance modulator. The modulation operator is completely studied from magnetic field parameters, thereby adding in understanding the working principle of IM. Expressions for the modulated magnetomotive force (MMF) is elucidated specifically for the squirrel cage induction machine (SCIM). Unique vector modulation to the magductance modulator is unveiled. Then, the effects of modulator parameters on machine performance are investigated. The calculation process based on the proposed method is illustrated in detail, with the key performance parameter expressed. The proposed method is validated through comparisons with finite element analysis (FEA) and experimental results.
- 17 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 15457-15466
Analysis of Squirrel Cage Induction Machine Based on the Magductance Modulator
In order to conduct an explicit analysis of the induction machine (IM), the sole magnetic field parameter’s description of short-circuited coils (SCC) modulator is crucial, despite its absence in the literature. This article presents a novel concept of introducing magductance into the SCC, thus referring to the SCC modulator as the magductance modulator. The modulation operator is completely studied from magnetic field parameters, thereby adding in understanding the working principle of IM. Expressions for the modulated magnetomotive force (MMF) is elucidated specifically for the squirrel cage induction machine (SCIM). Unique vector modulation to the magductance modulator is unveiled. Then, the effects of modulator parameters on machine performance are investigated. The calculation process based on the proposed method is illustrated in detail, with the key performance parameter expressed. The proposed method is validated through comparisons with finite element analysis (FEA) and experimental results.
- 23 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 11888-11897
Mechanism and Characteristics of Cogging Torque in Surface-Mounted PMSM: A General Airgap Field Modulation Theory Approach
In this article, the surface-mounted permanent magnet machine is regarded as a salient pole reluctance machine to take into account the effect of stator teeth. The field modulation behavior of the magnetizing field is firstly introduced, and the field model is then derived using the general airgap field modulation theory (GAFMT). The properties of the modulated field harmonics are explored based on the proposed field model. Subsequently, a general cogging torque model based on the virtual work method and the GAFMT is proposed to describe the relationship between the field harmonics and the cogging torque. On this basis, the mechanism of the cogging torque is studied, its frequency, effective field harmonics, and the contribution of each harmonic are revealed. The proposed model is then validated by comparing its results with those obtained from the Maxwell Stress Tensor method and the finite-element analysis, and a good agreement is observed, demonstrating the effectiveness of the proposed model. Furthermore, the experimental results also confirm the effectiveness of the proposed model.
- 23 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 11888-11897
Mechanism and Characteristics of Cogging Torque in Surface-Mounted PMSM: A General Airgap Field Modulation Theory Approach
In this article, the surface-mounted permanent magnet machine is regarded as a salient pole reluctance machine to take into account the effect of stator teeth. The field modulation behavior of the magnetizing field is firstly introduced, and the field model is then derived using the general airgap field modulation theory (GAFMT). The properties of the modulated field harmonics are explored based on the proposed field model. Subsequently, a general cogging torque model based on the virtual work method and the GAFMT is proposed to describe the relationship between the field harmonics and the cogging torque. On this basis, the mechanism of the cogging torque is studied, its frequency, effective field harmonics, and the contribution of each harmonic are revealed. The proposed model is then validated by comparing its results with those obtained from the Maxwell Stress Tensor method and the finite-element analysis, and a good agreement is observed, demonstrating the effectiveness of the proposed model. Furthermore, the experimental results also confirm the effectiveness of the proposed model.