Mechanism and Characteristics of Cogging Torque in Surface-Mounted PMSM: A General Airgap Field Modulation Theory Approach
- 23 January 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 11888-11897
Abstract
In this article, the surface-mounted permanent magnet machine is regarded as a salient pole reluctance machine to take into account the effect of stator teeth. The field modulation behavior of the magnetizing field is firstly introduced, and the field model is then derived using the general airgap field modulation theory (GAFMT). The properties of the modulated field harmonics are explored based on the proposed field model. Subsequently, a general cogging torque model based on the virtual work method and the GAFMT is proposed to describe the relationship between the field harmonics and the cogging torque. On this basis, the mechanism of the cogging torque is studied, its frequency, effective field harmonics, and the contribution of each harmonic are revealed. The proposed model is then validated by comparing its results with those obtained from the Maxwell Stress Tensor method and the finite-element analysis, and a good agreement is observed, demonstrating the effectiveness of the proposed model. Furthermore, the experimental results also confirm the effectiveness of the proposed model.Keywords
Funding Information
- National Natural Science Foundation of China (51991381)
- Anhui Provincial Major Science and Technology Project (202203c08020010)
This publication has 20 references indexed in Scilit:
- Principle of Flux-Switching Permanent Magnet Machine by Magnetic Field Modulation Theory Part I: Back-Electromotive-Force GenerationIEEE Transactions on Industrial Electronics, 2021
- Adaptive Repetitive Learning Control of PMSM Servo Systems with Bounded Nonparametric Uncertainties: Theory and ExperimentsIEEE Transactions on Industrial Electronics, 2020
- A Disturbance Observer-Based Current-Constrained Controller for Speed Regulation of PMSM Systems Subject to Unmatched DisturbancesIEEE Transactions on Industrial Electronics, 2020
- Analysis of Integrated Magnetic Gear Motor With Dual Mechanical Output Port: A Block Diagram ApproachIEEE Transactions on Energy Conversion, 2020
- Unified Analysis of Induction Machine and Synchronous Machine Based on the General Airgap Field Modulation TheoryIEEE Transactions on Industrial Electronics, 2018
- A Simple and Efficient Quasi-3D Magnetic Equivalent Circuit for Surface Axial Flux Permanent Magnet Synchronous MachinesIEEE Transactions on Industrial Electronics, 2018
- General Airgap Field Modulation Theory for Electrical MachinesIEEE Transactions on Industrial Electronics, 2017
- Influence of Rotor Topologies and Cogging Torque Minimization Techniques in the Detection of Static Eccentricities in Axial-Flux Permanent-Magnet MachineIEEE Transactions on Industry Applications, 2016
- Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines With Static and Rotating EccentricitiesIEEE Transactions on Industry Applications, 2014
- Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM MachinesIEEE Transactions on Industrial Electronics, 2012