Quintin Rochfort
Research Subjects
Research Interests
Quintin Rochfort has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Jiri Marsalek
Division of Urban Water Engineering, Luleå University of Technology, Luleå, Sweden
8 shared publications - Cheng He
National Water Research Institute, Environment Canada, P.O. Box 5050, Burlington, Ontario L7R 4A6
6 shared publications J. Marsalek
NWRI (National Water Research Institute), Environment Canada, 867 Lakeshore Road, P.O. Box 5050, Burlington, ON, Canada L7R 4A6
3 shared publications- Jim Wood
Physical Scientist, National Water Research Institute, Environment Canada, 867 Lakeshore Rd., Burlington ON, Canada L7R 4A6
3 shared publications A. Jurkovic
National Water Research Institute, Environment Canada, 867 Lakeshore Rd, Burlington, ON, Canada L7R 4A6
2 shared publications- Bommanna Gounder Krishnappan
Environment Canada, Burlington, ON L7R 4A6, Canada
2 shared publications
Latest Publications
- 1 April 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 150 (4)
Enhancing Sedimentation Using Newly Proposed Virtual Bed Concept
- 1 April 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 150 (4)
Enhancing Sedimentation Using Newly Proposed Virtual Bed Concept
- 1 September 2015
- Published by Elsevier in Journal of Environmental Management
- Vol. 160, 1-6
Enhancing sedimentation by improving flow conditions using parallel retrofit baffles
- 1 September 2015
- Published by Elsevier in Journal of Environmental Management
- Vol. 160, 1-6
Enhancing sedimentation by improving flow conditions using parallel retrofit baffles
- 1 July 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 138 (7) , 796-803
Enhancement of Ultraviolet Disinfection of Wastewater by Low Pressure Water Jet Pretreatment: Effectiveness and Impacts on Bacteria
It has been proven that the concept of using a high pressure water jet (HPWJ) to pretreat wastewater for the enhancement of ultraviolet (UV) disinfection of wastewater is an effective and cost-efficient alternative compared with the widely studied ultrasonic method. This study addresses: (1) the effectiveness of the pretreatment with a low pressure water jet (LPWJ) under similar experimental settings to the previous HPWJ study, (2) the water pressure impacts on bacteria in the treated wastewater, and (3) the difference in electrical energy consumption under treatment with different pressures. The results show that with the tested primary clarifier overflow (PCO), there were no real differences in enhancement of UV disinfection with LPWJ pretreatment operating under a tested pressure range from 0.97 to 6.80 MPa. More than 1 log unit improvement of UV disinfection efficiency can be achieved under all the tested pressures compared with treatment by UV irradiation alone when the UV dose is in the 20∼3...
- 1 July 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 138 (7) , 796-803
Enhancement of Ultraviolet Disinfection of Wastewater by Low Pressure Water Jet Pretreatment: Effectiveness and Impacts on Bacteria
It has been proven that the concept of using a high pressure water jet (HPWJ) to pretreat wastewater for the enhancement of ultraviolet (UV) disinfection of wastewater is an effective and cost-efficient alternative compared with the widely studied ultrasonic method. This study addresses: (1) the effectiveness of the pretreatment with a low pressure water jet (LPWJ) under similar experimental settings to the previous HPWJ study, (2) the water pressure impacts on bacteria in the treated wastewater, and (3) the difference in electrical energy consumption under treatment with different pressures. The results show that with the tested primary clarifier overflow (PCO), there were no real differences in enhancement of UV disinfection with LPWJ pretreatment operating under a tested pressure range from 0.97 to 6.80 MPa. More than 1 log unit improvement of UV disinfection efficiency can be achieved under all the tested pressures compared with treatment by UV irradiation alone when the UV dose is in the 20∼3...
- 1 October 2011
- Published by IWA Publishing in Water Science & Technology
- Vol. 64 (7) , 1503-1510
In search of effective bioassessment of urban stormwater pond sediments: enhancing the ‘sediment quality triad’ approach with oligochaete metrics
Stormwater ponds have been widely used to control increased volumes and rates of surface runoff resulting from urbanization. As receiving waters, they are under the influence of intermittent pollution from urban wet-weather discharges. Meanwhile they offer new aquatic habitats balancing the transformation of initial ecosystems and their associated biodiversity. Bioassessment of stormwater facilities is therefore crucial to insure the preservation and rehabilitation of biodiversity in urban areas. Nonetheless, the application of traditional bioassessment methodologies such as the sediment quality triad (SQT), based on the comparisons with reference sites, is challenged by the artificial and atypical features of urban stormwater ponds. Our concern in finding a more specific and effective bioassessment methodology led us to consider associating the Oligochaete Index Methodology (OIM) with the SQT. This study shows that although some adjustments were needed, the OIM brought new and complementary information to the SQT assessment on the effects of contaminants and on the biological quality status of the sediment in a test urban stormwater pond.
- 1 October 2011
- Published by IWA Publishing in Water Science & Technology
- Vol. 64 (7) , 1503-1510
In search of effective bioassessment of urban stormwater pond sediments: enhancing the ‘sediment quality triad’ approach with oligochaete metrics
Stormwater ponds have been widely used to control increased volumes and rates of surface runoff resulting from urbanization. As receiving waters, they are under the influence of intermittent pollution from urban wet-weather discharges. Meanwhile they offer new aquatic habitats balancing the transformation of initial ecosystems and their associated biodiversity. Bioassessment of stormwater facilities is therefore crucial to insure the preservation and rehabilitation of biodiversity in urban areas. Nonetheless, the application of traditional bioassessment methodologies such as the sediment quality triad (SQT), based on the comparisons with reference sites, is challenged by the artificial and atypical features of urban stormwater ponds. Our concern in finding a more specific and effective bioassessment methodology led us to consider associating the Oligochaete Index Methodology (OIM) with the SQT. This study shows that although some adjustments were needed, the OIM brought new and complementary information to the SQT assessment on the effects of contaminants and on the biological quality status of the sediment in a test urban stormwater pond.
- Open Access
- 1 May 2011
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 46 (2) , 121-136
Environmental characterization of surface runoff from three highway sites in Southern Ontario, Canada: 2. Toxicology
Highway runoff is a significant source of contaminants entering many freshwater systems. A battery of bioassays was used to assess the degree of runoff toxicity. The toxicity results are described in the spatial and temporal context and are linked to the runoff chemistry. Runoff samples from three sites, representing different classes of highways (high, intermediate and low traffic intensity), were used to assess the degree of runoff toxicity. Runoff from the major multilane divided highway, with the highest traffic intensity (92,000 vehicles/24 h), had the highest levels of contaminants and displayed the greatest toxicity. Variations in toxic responses were observed both seasonally and throughout runoff events. The runoff samples containing high concentrations of road salts from winter maintenance were acutely toxic to Daphnia magna. In general, a sharp decline in runoff toxicity over time showed that the ‘first flush’ was the most toxic. Road solids present in runoff showed moderate to severe toxicity using a nematode bioassay. Consistently, a significant mixed function oxidase (MFO) induction was observed in rainbow trout exposed to runoff with high concentrations of polycyclic aromatic hydrocarbons (PAHs). The data show that vehicular operation, road maintenance and metal highway structures were significant contributors to contaminant-associated toxicity in road runoff.
- 1 May 2011
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 46 (2) , 121-136
Open AccessEnvironmental characterization of surface runoff from three highway sites in Southern Ontario, Canada: 2. Toxicology
Highway runoff is a significant source of contaminants entering many freshwater systems. A battery of bioassays was used to assess the degree of runoff toxicity. The toxicity results are described in the spatial and temporal context and are linked to the runoff chemistry. Runoff samples from three sites, representing different classes of highways (high, intermediate and low traffic intensity), were used to assess the degree of runoff toxicity. Runoff from the major multilane divided highway, with the highest traffic intensity (92,000 vehicles/24 h), had the highest levels of contaminants and displayed the greatest toxicity. Variations in toxic responses were observed both seasonally and throughout runoff events. The runoff samples containing high concentrations of road salts from winter maintenance were acutely toxic to Daphnia magna. In general, a sharp decline in runoff toxicity over time showed that the ‘first flush’ was the most toxic. Road solids present in runoff showed moderate to severe toxicity using a nematode bioassay. Consistently, a significant mixed function oxidase (MFO) induction was observed in rainbow trout exposed to runoff with high concentrations of polycyclic aromatic hydrocarbons (PAHs). The data show that vehicular operation, road maintenance and metal highway structures were significant contributors to contaminant-associated toxicity in road runoff.
- Open Access
- 1 May 2011
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 46 (2) , 110-120
Environmental characterization of surface runoff from three highway sites in Southern Ontario, Canada: 1. Chemistry
Highway runoff is a significant source of contaminants entering many freshwater systems. To provide information on effects of highway runoff on aquatic biota, runoff samples were collected from three sites representing different classes of highways with low, intermediate and high traffic intensities. Samples were analysed for chloride, trace metals and polycyclic aromatic hydrocarbons (PAHs). Runoff from a major multilane divided highway, with the highest traffic intensity, contained the highest levels of chloride (45–19,135 mg/L) and metals. Runoff solids from this highway contained the highest levels of PAHs (19.7–2142 mg/kg). PAHs were also high (9.83–237 mg/kg and 26.4–778 mg/kg) at the intermediate and low traffic intensity sites, respectively. High concentrations of potent mutagens and carcinogens such as benzo(a)pyrene (0.414–124.62 μg/g) and indeno-pyrene (0.549–50.597 μg/g) were measured in the particulate phase of all runoff samples. Chloride concentrations of winter and early spring runoff were significantly higher (P < 0.001, t = 2.66) than during the rest of the year. Levels of contaminants depended on traffic intensity, road condition (age, composition, maintenance), the condition of metal structures (drains, guardrails, etc.) and seasonal conditions. A companion paper discusses spatial and temporal aspects of contaminant-associated toxicity of highway runoff.
- 1 May 2011
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 46 (2) , 110-120
Open AccessEnvironmental characterization of surface runoff from three highway sites in Southern Ontario, Canada: 1. Chemistry
Highway runoff is a significant source of contaminants entering many freshwater systems. To provide information on effects of highway runoff on aquatic biota, runoff samples were collected from three sites representing different classes of highways with low, intermediate and high traffic intensities. Samples were analysed for chloride, trace metals and polycyclic aromatic hydrocarbons (PAHs). Runoff from a major multilane divided highway, with the highest traffic intensity, contained the highest levels of chloride (45–19,135 mg/L) and metals. Runoff solids from this highway contained the highest levels of PAHs (19.7–2142 mg/kg). PAHs were also high (9.83–237 mg/kg and 26.4–778 mg/kg) at the intermediate and low traffic intensity sites, respectively. High concentrations of potent mutagens and carcinogens such as benzo(a)pyrene (0.414–124.62 μg/g) and indeno-pyrene (0.549–50.597 μg/g) were measured in the particulate phase of all runoff samples. Chloride concentrations of winter and early spring runoff were significantly higher (P < 0.001, t = 2.66) than during the rest of the year. Levels of contaminants depended on traffic intensity, road condition (age, composition, maintenance), the condition of metal structures (drains, guardrails, etc.) and seasonal conditions. A companion paper discusses spatial and temporal aspects of contaminant-associated toxicity of highway runoff.
- Open Access
- 1 February 2009
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 44 (1) , 48-58
Street Sweeping as a Method of Source Control for Urban Stormwater Pollution
The effectiveness of street sweeping as a source control measure for stormwater pollution was tested at a site in Toronto, using three types of sweepers employed by the City. A paired-plot experimental design was employed along an arterial road with a traffic volume of 26,000 vehicles/day. Typically, after several days of dry weather, one roadway plot was swept by the available sweeper (treated) and the following plot was left unswept (control). After sweeping, sediment on the roadway was sampled on both plots; wet samples were collected by washing off one half of each plot, and dry samples were collected by vacuum cleaning the remaining halves of both plots. Differences between swept and unswept plots were assessed by comparing: (a) conventional sediment quality parameters, total residue mass, and particle sizes for dry sediment samples, and (b) toxicity, conventional water quality parameters, and particle sizes in wet samples. Results were highly variable and contained large uncertainties. The greatest environmental benefits of sweeping were the reduction of the total mass of sediment on road surfaces and a reduction in some dissolved metals in the runoff (e.g., Cr and Zn).
- 1 February 2009
- Published by IWA Publishing in Water Quality Research Journal
- Vol. 44 (1) , 48-58
Open AccessStreet Sweeping as a Method of Source Control for Urban Stormwater Pollution
The effectiveness of street sweeping as a source control measure for stormwater pollution was tested at a site in Toronto, using three types of sweepers employed by the City. A paired-plot experimental design was employed along an arterial road with a traffic volume of 26,000 vehicles/day. Typically, after several days of dry weather, one roadway plot was swept by the available sweeper (treated) and the following plot was left unswept (control). After sweeping, sediment on the roadway was sampled on both plots; wet samples were collected by washing off one half of each plot, and dry samples were collected by vacuum cleaning the remaining halves of both plots. Differences between swept and unswept plots were assessed by comparing: (a) conventional sediment quality parameters, total residue mass, and particle sizes for dry sediment samples, and (b) toxicity, conventional water quality parameters, and particle sizes in wet samples. Results were highly variable and contained large uncertainties. The greatest environmental benefits of sweeping were the reduction of the total mass of sediment on road surfaces and a reduction in some dissolved metals in the runoff (e.g., Cr and Zn).
- 1 September 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 134 (9) , 722-730
Using CFD Modeling to Improve the Inlet Hydraulics and Performance of a Storm-Water Clarifier
The feasibility of high-rate treatment of storm water achieving total suspended solids (TSS) removals in the range from 60 to 80% was studied using an available clarifier. The clarifier ( 3 m long, 1.4 m wide, and 2 m deep) was fitted with a removable lamella pack and had a limited flow capacity (surface load rate of 35 m∕h ). To achieve the desired removals of TSS, the clarifier required polymer feed (4 mg∕L) , which caused maintenance problems during intermittent storm-water treatment—laborious and costly cleaning of lamella plates after individual storm events. This problem posed the following challenge: was it feasible to avoid costly maintenance by removing the lamella pack and at the same time to retain the high TSS removals by improving the clarifier hydraulics by internal structural changes? The purpose of the paper is to evaluate such changes by focusing on different inlet configurations designed using computational fluid dynamics (CFD) simulations. This analysis resulted in adopting a U-tube duc...
- 1 September 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 134 (9) , 722-730
Using CFD Modeling to Improve the Inlet Hydraulics and Performance of a Storm-Water Clarifier
The feasibility of high-rate treatment of storm water achieving total suspended solids (TSS) removals in the range from 60 to 80% was studied using an available clarifier. The clarifier ( 3 m long, 1.4 m wide, and 2 m deep) was fitted with a removable lamella pack and had a limited flow capacity (surface load rate of 35 m∕h ). To achieve the desired removals of TSS, the clarifier required polymer feed (4 mg∕L) , which caused maintenance problems during intermittent storm-water treatment—laborious and costly cleaning of lamella plates after individual storm events. This problem posed the following challenge: was it feasible to avoid costly maintenance by removing the lamella pack and at the same time to retain the high TSS removals by improving the clarifier hydraulics by internal structural changes? The purpose of the paper is to evaluate such changes by focusing on different inlet configurations designed using computational fluid dynamics (CFD) simulations. This analysis resulted in adopting a U-tube duc...
- 1 May 2008
- Published by IWA Publishing in Water Science & Technology
- Vol. 57 (9) , 1375-1381
Assessing urban stormwater toxicity: methodology evolution from point observations to longitudinal profiling
The quality of aquatic habitat in a stormwater management facility located in Toronto, Ontario, was assessed by examining ecotoxicological responses of benthic invertebrates exposed to sediment and water from this system. Besides residential stormwater, the facility receives highway runoff contaminated with trace metals, polycyclic aromatic hydrocarbons (PAHs), and road salt. The combined flow passes through two extended detention ponds (in series) and a vegetated outlet channel. Toxicity of surficial sediment collected from 14 longitudinally arrayed locations was assessed based on 10 acute and chronic endpoints from laboratory tests with four benthic organisms. Greatest overall toxicity was observed in sediment from sites in the upstream pond, where mortality to amphipods and mayflies reached up to 100%. Downstream pond sediment was less toxic on average than the upstream pond sediment, but not the outlet channel sediment where untreated stormwater discharges provided additional sources of contamination. Macroinvertebrate communities in sediment cores were depauperate and dominated by oligochaetes and chironomids, with minimum densities and diversity at the deeper central pond sites. While sediment toxicity was associated with high concentrations of trace metals and high-molecular weight PAHs, benthic community impoverishment appeared related to high water column salinity.
- 1 May 2008
- Published by IWA Publishing in Water Science & Technology
- Vol. 57 (9) , 1375-1381
Assessing urban stormwater toxicity: methodology evolution from point observations to longitudinal profiling
The quality of aquatic habitat in a stormwater management facility located in Toronto, Ontario, was assessed by examining ecotoxicological responses of benthic invertebrates exposed to sediment and water from this system. Besides residential stormwater, the facility receives highway runoff contaminated with trace metals, polycyclic aromatic hydrocarbons (PAHs), and road salt. The combined flow passes through two extended detention ponds (in series) and a vegetated outlet channel. Toxicity of surficial sediment collected from 14 longitudinally arrayed locations was assessed based on 10 acute and chronic endpoints from laboratory tests with four benthic organisms. Greatest overall toxicity was observed in sediment from sites in the upstream pond, where mortality to amphipods and mayflies reached up to 100%. Downstream pond sediment was less toxic on average than the upstream pond sediment, but not the outlet channel sediment where untreated stormwater discharges provided additional sources of contamination. Macroinvertebrate communities in sediment cores were depauperate and dominated by oligochaetes and chironomids, with minimum densities and diversity at the deeper central pond sites. While sediment toxicity was associated with high concentrations of trace metals and high-molecular weight PAHs, benthic community impoverishment appeared related to high water column salinity.
- 1 November 2007
- Published by IWA Publishing in Water Science & Technology
- Vol. 56 (9) , 13-20
Bioassessment of wet-weather pollution impacts on fine sediments in urban waters by benthic indices and the sediment quality triad
Benthic invertebrate assessments can be used to gauge the impact of urban wet-weather flows in receiving waters. Experiences from Cemagref in France have shown that standardized benthic indices (e.g. Oligochaete Index of Sediment Bioindication - IOBS) can be used to reliably determine the ecological status of urban streams and can be incorporated into the new European Water Framework Directive. The Canadian studies on streams and stormwater ponds using chemical analyses, benthic toxicity testing and benthic invertebrate community structure (i.e. the sediment quality triad) comparisons have shown that toxicity was more likely to occur in ponds at sites with higher concentrations of heavy metals and heavier polycyclic aromatic hydrocarbons, and at greater water depths, where fine sediments from urban runoff accumulated. A more comprehensive evaluation of wet-weather flow impacts could be obtained by combining approaches from both countries.
- 1 November 2007
- Published by IWA Publishing in Water Science & Technology
- Vol. 56 (9) , 13-20
Bioassessment of wet-weather pollution impacts on fine sediments in urban waters by benthic indices and the sediment quality triad
Benthic invertebrate assessments can be used to gauge the impact of urban wet-weather flows in receiving waters. Experiences from Cemagref in France have shown that standardized benthic indices (e.g. Oligochaete Index of Sediment Bioindication - IOBS) can be used to reliably determine the ecological status of urban streams and can be incorporated into the new European Water Framework Directive. The Canadian studies on streams and stormwater ponds using chemical analyses, benthic toxicity testing and benthic invertebrate community structure (i.e. the sediment quality triad) comparisons have shown that toxicity was more likely to occur in ponds at sites with higher concentrations of heavy metals and heavier polycyclic aromatic hydrocarbons, and at greater water depths, where fine sediments from urban runoff accumulated. A more comprehensive evaluation of wet-weather flow impacts could be obtained by combining approaches from both countries.