YJYeonjae Jung

Yeonjae Jung

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yeonjae Jung has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Wide Load Range, High Current Accuracy Low Drop-Out Regulator With Load Tracking Compensation and Dual Soft-Start for Wireless Charging System

    by Jae Bin Kim, Ji Hoon Song, Sang Sun Yoo, Seok Kee Kim, Yeon Jae Jung, Young Gun Pu, Kang Yoon Lee

    This study introduces a High Voltage Low Dropout (LDO) regulator featuring a dual soft-start mechanism and load tracking compensation technique for Wireless Power Transfer (WPT) systems. The LDO design efficiently handles a broad input voltage spectrum from 5.15V to 20V and maintains stable performance under fluctuating load conditions ranging from 1mA to 1A. A notable advancement in this design is the dual soft-start mechanism, which enhances startup stability by separately regulating the pass transistor gate and the error amplifier input. Additionally, the load tracking compensation technique optimizes phase margin across diverse load currents, enhancing transient response and output stability. The regulator incorporates a current-sensing circuit for instantaneous overcurrent protection, accommodating load currents between 100mA and 1A. An integrated charge pump expands the error amplifier’s operational range, allowing high-voltage compatibility while running on a 5V supply. Utilizing a BCD process, the proposed circuit delivers high power efficiency and robust performance within a compact layout measuring 0.8814 mm2. These design features contribute to enhanced reliability and efficiency in WPT systems.


  • Open Access

    Design of a High Efficiency Bi-Directional Four-Switch Buck-Boost Converter With HV Gate Driver for Multi-Cell Battery Power Bank Applications

    by Sung-June Byun, Byeong-Gi Jang, Jong-Wan Jo, Dae-Young Choi, Young-Gun Pu, Sang-Sun Yoo, Seok-Kee Kim, Yeon-Jae Jung, Kang-Yoon Lee

    This paper presents a bidirectional Four-Switch Buck-Boost (FSBB) converter with a high-voltage (HV) gate driver for use in power bank applications. The proposed FSBB is also integrated into this converter for increased efficiency. Thus, the proposed buck-boost converter can reduce conduction loss over a wide input voltage range by reducing the on-resistance of external MOSFETs using a gate source voltage (VGS) of 5V or 10V. The chip to be examined in this study is fabricated using a 130 nm 1P5M bipolar-CMOS-DMOS HV process with laterally diffused MOSFET (LDMOS) options to have a die size of 2.7 x 2.7 mm2. The proposed architecture is found to achieve a maximum output power level of 40W. The measurement results show that the maximum efficiencies at gate-source voltages (VGS) of 5V and 10V are 96.67% and 98.15%, respectively.


  • A 92.7% Peak Efficiency Self-Starting Boost Converter With MPPT and Phase Frequency Detector Based Multi Current Detector for Energy Harvesting Systems With a Minimum Input Source Impedance of 1 Ω

    by Ju-Won Oh, Jun-Eun Park, Jong Wan Jo, Yeong-Hun Kim, Yun-Gwan Kim, Sung-Jae Lee, Yeonjae Jung, Young-Gun Pu, Sang-Hyun Lee, Keum-Cheol Hwang, et al.

    This article presents a boost converter based on a maximum power point tracking (MPPT) circuit, and a multicurrent detector (MCD), an offset cancellation circuit to achieve high efficiency over a wide range of input power. The proposed boost converter employs an MPPT design for adaptive on-time operation, which adjusts the on-time width to achieve maximum efficiency depending on the input voltage. In addition, a phase frequency detector-based offset cancellation method is proposed to minimize power loss by accurately sensing the current detector, thereby transferring power. Therefore, the proposed method achieves a significant efficiency improvement of up to 10 % by implementing high-precision offset cancellation with an offset level of approximately $5~\mu $ A, which is significantly lower than the conventional MCD offset of over 60 mA of maximum offset current level. The proposed boost converter fabricated in a 130 nm Bipolar-CMOS-DMOS (BCD) process occupies an active area of 0.806 mm2 and can self-start with a minimum input voltage of 450 mV ( $40~\mu $ W) and achieve maximum efficiency of 92.7 %.


  • Open Access

    Low-Cost Universal Multi-Mode Digital Compensator Design for Flyback Converters With Full Digital Feedback

    by Yun Gwan Kim, Jae Bin Kim, Byeong Gi Jang, Jae Hyung Jang, Sang-Sun Yoo, Seok Kee Kim, Yeon Jae Jung, Young Gun Pu, Kang-Yoon Lee

    This study presents a low-cost digital compensator design for a flyback converter featuring a full digital feedback loop. This design replaces the traditional analog compensation circuit with a digital compensator, where the external resistance and capacitor are removed. The system parameters of the digital compensator are engineered to allow for universal adaptability. An 8-bit successive-approximation analog-to-digital converter circuit facilitates the conversion of analog signals into digital data. These circuits are fabricated using a 180-nm BCD processor. The output voltage ranges from 3.5 to 9 V, while the output current varies from 1 to 3 A. The flyback converter equipped with the designed digital compensator achieves a maximum power efficiency of 83%. The total chip area, encompassing both the digital compensator and data converter circuit, measures 950 μm × 460 μm.


  • A Design of Analog PLL-Based Self-Calibrated Open-Loop FSK Modulator for BLE Advertising Transmitter

    by Donggyu Kim, Jun-Eun Park, Howon Kim, Sang-Sun Yoo, Yeonjae Jung, Yo-Chuol Ho, Seokkee Kim, Kang-Yoon Lee

    This brief presents a self-calibrated open-loop modulation technique for a Bluetooth low energy (BLE) advertising transmitter. The proposed technique can be implemented using a voltage-controlled oscillator (VCO), counter, and capacitor for voltage storage in an analog phase-locked loop (PLL). In the closed-loop mode using negative feedback, the VCO generates the target frequency output, and the control voltage of the VCO is stored in the capacitor. In the proposed open-loop mode, the stored control voltage is fed to the VCO. The frequency offset caused by the voltage offset is measured using a counter and corrected using the modulation capacitor bank of the VCO together with the frequency deviation. Thus, the open-loop modulation approach does not necessitate the use of additional circuits for detecting and compensating frequency offsets. The proposed open-loop modulation consumes 600 μW less power than the closed-loop modulation and has been implemented using the 55-nm CMOS process. The chip area is 0.225 mm2, and the total power consumption is 1.22 mW.


  • Open Access

    A Design of Boost Converter With Time-Domain MPPT and Digital Self-Tracking ZCD for Thermoelectric Energy Harvesting Applications

    by Jong Wan Jo, Dae-Han Yu, YoungGun Pu, Yeon Jae Jung, Seokkee Kim, Joon-Mo Yoo, Keum Cheol Hwang, Youngoo Yang, Kang-Yoon Lee

    This paper presents a DC-DC boost converter for energy harvesting. The time-domain maximum power point tracking (MPPT) technique implements to maximize the source's energy harvesting performance with no additional switch and time slot. Furthermore, it is implementing digital self-tracking zero current detectors (ST-ZCD) for high efficiency. This DC-DC boost converter fabricates with a 180nm CMOS process. The input voltage of the boost converter ranges from 0.2 to 0.7V and generates the output voltage of 1.2V. The total area of this converter with the MPPT operation is 600 μm x 475 μm. The measured power conversion efficiency of this DC-DC boost converter is 85.5%.


  • Open Access

    A 5.8 GHz 1.8 V +20 dBm 32.5% PAE Power Amplifier for a Short-Range Over-the-Air WPT Application

    by Myonggwan Kim, Reza E. Rad, Sungjin Kim, Younggun Pu, Yeonjae Jung, Hyungki Huh, Joonmo Yoo, Seokkee Kim, Kangyoon Lee

    This paper presents a 5.8 GHz differential cascode power amplifier for an over-the-air wireless power transfer application. Over-the-air wireless power transfer provides a variety of benefits in several applications such as the Internet of Things and medical implantation applications. The proposed PA features two fully differentially active stages with a custom-designed transformer to provide a single-ended output. The custom-made transformer shows a high quality factor, as high as 11.6 and 11.2 for the primary and secondary sides at 5.8 GHz. Fabricated using a standard 180 nm CMOS process, the amplifier achieves input and output matching of −14.7 dB and −29.7 dB, respectively. To achieve a high power level and efficiency, accurate optimization through power matching, Power Added Efficiency (PAE), and the design of the transformer are carried out while the supply voltage is limited to 1.8 V. Measurement results show a 20 dBm output power with a PAE as high as 32.5%, which makes the PA suitable for application, and it can be implanted while arrayed with various antenna arrays. Finally, a FOM is introduced to compare the performance of the work with similar works in the literature.


  • Open Access

    Design of a Current Sensing System with TIA Gain of 160 dBΩ and Input-Referred Noise of 1.8 pArms for Biosensor

    by Donggyu Kim, Sungjun Byun, Younggun Pu, Hyungki Huh, Yeonjae Jung, Seokkee Kim, Kang-Yoon Lee

    This paper proposes a high-gain low-noise current signal detection system for biosensors. When the biomaterial is attached to the biosensor, the current flowing through the bias voltage is changed so that the biomaterial can be sensed. A resistive feedback transimpedance amplifier (TIA) is used for the biosensor requiring a bias voltage. Current changes in the biosensor can be checked by plotting the current value of the biosensor in real time on the self-made graphical user interface (GUI). Even if the bias voltage changes, the input voltage of the analog to digital converter (ADC) does not change, so it is designed to plot the current of the biosensor accurately and stably. In particular, for multi-biosensors with an array structure, a method of automatically calibrating the current between biosensors by controlling the gate bias voltage of the biosensors is proposed. Input-referred noise is reduced using a high-gain TIA and chopper technique. The proposed circuit achieves 1.8 pArms input-referred noise with a gain of 160 dBΩ and is implemented in a TSMC 130 nm CMOS process. The chip area is 2.3 mm2, and the power consumption of the current sensing system is 12 mW.


  • Open Access

    A Design of Analog Front-End with DBPSK Demodulator for Magnetic Field Wireless Network Sensors

    by S. Ali Hosseini Asl, Behnam S. Rikan, Arash Hejazi, YoungGun Pu, Hyungki Huh, Yeonjae Jung, Keum Cheol Hwang, Youngoo Yang, Kang-Yoon Lee

    This paper presents an on-chip fully integrated analog front-end (AFE) with a non-coherent digital binary phase-shift keying (DBPSK) demodulator suitable for short-range magnetic field wireless communication applications. The proposed non-coherent DBPSK demodulator is designed based on using comparators to digitize the received differential analog BPSK signal. The DBPSK demodulator does not need any phase-lock loop (PLL) to detect the data and recover the clock. Moreover, the proposed demodulator provides the detected data and the recovered clock simultaneously. Even though previous studies have offered the basic structure of the AFEs, this work tries to amplify and generate the required differential BPSK signal without missing data and clock throughout the AFE, while a low voltage level signal is received at the input of the AFE. A DC-offset cancellation (DCOC), a cascaded variable gain amplifier (VGA), and a single-to-differential (STOD) converter are employed to construct the implemented AFE. The simulation results indicate that the AFE provides a dynamic range of 0 dB to 40 dB power gain with 2 dB resolution. Measurement results show the minimum detectable voltage at the input of AFE is obtained at 20 mV peak-to-peak. The AFE and the proposed DBSPK demodulator are analyzed and fabricated in a 130 nm Bipolar-CMOS-DMOS (BCD) technology to recover the maximum data rate of 32 kbps where the carrier frequency is 128 kHz. The implemented DCOC, cascaded VGA, STOD, and the demodulator occupy 0.15 mm2, 0.063 mm2, 0.045 mm2, and 0.03 mm2 of area, respectively. The AFE and the demodulator consume 2.9 mA and 0.15 mA of current from an external 5 V power supply, respectively.