Design of a High Efficiency Bi-Directional Four-Switch Buck-Boost Converter With HV Gate Driver for Multi-Cell Battery Power Bank Applications
Open Access
- 4 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 6, 110-119
Abstract
This paper presents a bidirectional Four-Switch Buck-Boost (FSBB) converter with a high-voltage (HV) gate driver for use in power bank applications. The proposed FSBB is also integrated into this converter for increased efficiency. Thus, the proposed buck-boost converter can reduce conduction loss over a wide input voltage range by reducing the on-resistance of external MOSFETs using a gate source voltage (VGS) of 5V or 10V. The chip to be examined in this study is fabricated using a 130 nm 1P5M bipolar-CMOS-DMOS HV process with laterally diffused MOSFET (LDMOS) options to have a die size of 2.7 x 2.7 mm2. The proposed architecture is found to achieve a maximum output power level of 40W. The measurement results show that the maximum efficiencies at gate-source voltages (VGS) of 5V and 10V are 96.67% and 98.15%, respectively.Keywords
This publication has 23 references indexed in Scilit:
- Open-Source Multilevel Converter Power IC Design and TestIEEE Design & Test, 2024
- Analysis and Design of a Wide Output Voltage Range Battery Charger for e-Mobility ApplicationsIEEE Journal of Emerging and Selected Topics in Industrial Electronics, 2024
- A Bridgeless Modified Boost Converter to Improve Power Factor in EV Battery Charging ApplicationsIEEE Journal of Emerging and Selected Topics in Industrial Electronics, 2024
- 11.7 A Wide 0.1-to-10 Conversion-Ratio Symmetric Hybrid Buck-Boost Converter for USB PD Bidirectional Conversion2023
- Design and Control of Two Stage Battery Charger for Low Voltage Electric Vehicle using High Gain Buck-Boost PFC AC-DC Converter2022
- Comparative Topology and Power Loss Analysis on 48V-to-1V Direct Step-Down Non-Isolated DC-DC Switched-Mode Power Converters2020
- Analysis of Specified Capacity in Power BanksIEEE Access, 2020
- A Monolithic High-Voltage Li-Ion Battery Charger With Sharp Mode Transition and Partial Current Control TechniqueIEEE Transactions on Circuits and Systems I: Regular Papers, 2018
- Non-inverting buck-boost converter for fuel cell applications2008
- Buck-boost PWM converters having two independently controlled switches2002