DGDmitry Genne

Dmitry Genne

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dmitry Genne has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Innovative Ultrasonic Spray Methods for Indoor Disinfection

    by Andrey Shalunov, Olga Kudryashova, Vladimir Khmelev, Dmitry Genne, Sergey Terentiev, Viktor Nesterov

    This study explores the challenges associated with dispersing disinfectant liquids for sanitizing individuals, indoor spaces, vehicles, and outdoor areas. Among the various approaches, fine aerosol sprays with a high particle surface area emerge as a particularly promising solution. Ultrasonic spraying, which leverages diverse mechanisms of ultrasound interaction with liquids, offers several distinct advantages. Notably, it enables the production of fine aerosols from liquids with a broad range of physical and chemical properties, including variations in purity, viscosity, and surface tension. This capability is especially critical for disinfectant liquids and suspensions, which often exhibit low surface tension and/or high viscosity. The article provides a comprehensive review of ultrasonic spraying methods and technologies developed by the authors’ team in recent years. It highlights innovative ultrasonic sprayers, including the latest designs, which are capable of generating aerosols with precise dispersion characteristics and high productivity from disinfectant liquids.


  • EFFECT OF ULTRASONIC CAVITATION ON THE GAS–LIQUID INTERFACE UNDER FORCED AERATION

    by Golykh, J.-B. Carrat, V.N. Khmelev, I.A. Manyakhin, V.D. Minakov, D.V. Genne, A.R. Barsukov

    A setup for experimental studies of the structure, shape, and size of the gas–liquid interface under ultrasonic exposure and forced aeration has been developed. It has been found that ultrasonic exposure leads to an about 1.5-fold increase in interfacial area during aeration. The ultrasound intensity has been shown to have an optimal value that provides a maximum increase in interfacial area per unit ultrasonic energy input.


  • Open Access

    Justification and implementation of the layer thickness control method in ultrasonic spraying

    by Vladimir N. Khmelev, Андрей Викторович Шалунов, Dmitry V. Genne

    Relevance. The need for the development and widespread use of the ultrasonic spraying method, which has unique advantages, to solve the most pressing problems of modern industry. In particular: minimal, of all known methods, energy consumption for the implementation of the process, the possibility of forming fine droplets without the use of gas under pressure, regulating the dispersion of the formed aerosol by the parameters of the emitter, etc. However, for widespread practical use of the ultrasonic spraying method, it is necessary to ensure spraying conditions with a specified dispersion and productivity. In this regard, there is a need to develop a method for controlling and maintaining the necessary and sufficient thickness of the liquid layer on the surface of the piezoelectric transducer of the atomizer, the spraying of which will ensure, at a given spraying performance, the formation of an aerosol with the smallest deviation in the size of the formed droplets relative to the average value. It is proposed to control the thickness of the liquid layer by identifying the dependence of the resonant frequency of the piezoelectric transducer of the atomizer on the thickness of the liquid film on the oscillating surface of the atomizer. Aim. To develop a method and means for controlling the thickness of the layer of sprayed liquid by changing the resonant frequency of the ultrasonic oscillatory system and maintaining the optimal value of the layer thickness by changing the amplitude of vibrations of the surface of the ultrasonic sprayer. Objects. Liquid atomizing with ultrasonic high-amplitude vibrations. Methods. Obtaining the frequency characteristics of ultrasonic oscillatory systems, analyzing changes in the amplitude-frequency characteristics of oscillating systems and identifying criteria that allow monitoring and managing the ultrasonic spraying. Results. The authors have proposed and developed the method for indirectly monitoring the thickness of a sprayed liquid layer on the oscillating surface of an ultrasonic atomizer, based on measuring the resonant frequency of an ultrasonic oscillating system. The possibility of implementing the method and its practical application is caused by the fact that in the working range of layer thicknesses of the sprayed liquid, the change in the resonant frequency can reach 100 Hz, and with a frequency measurement accuracy of 1 Hz, the accuracy of determining the layer thickness will be no more than 2% of the working layer thickness. The identified dependencies and certain values of possible ranges of changes in the controlled parameter made it possible for the first time to develop a method for automatically controlling ultrasonic spraying, ensuring the maintenance of optimal modes of ultrasonic influence (amplitude of vibrations of the spray surface) and the thickness of the layer of sprayed liquid.

  • Open Access

    Innovative Ultrasonic Spray Methods for Indoor Disinfection

    by Andrey Shalunov, Olga Kudryashova, Vladimir Khmelev, Dmitry Genne, Sergey Terentiev, Viktor Nesterov

    This study addresses the challenge of dispersing disinfectant liquids for sanitizing people, indoor spaces, vehicles, and outdoor areas. Fine aerosol sprays with a large surface area of particles are considered the most promising solution for such tasks. The study identifies shortcomings in current spraying methods and highlights the potential of ultrasonic liquid atomization for improving disinfection processes. Innovative specialized ultrasonic atomizers are introduced, capable of producing aerosols with the required droplet size and efficiency from disinfectant liquids of varying viscosities, including those containing silver nanoparticles.


  • Open Access

    The Development and Analysis of a Multistage Spraying Method for Liquids in an Ultrasonic Field

    by Andrey Shalunov, Vladimir Khmelev, Sergey Terentiev, Viktor Nesterov, Dmitry Genne

    Spraying various liquids (primarily aqueous solutions of various substances) is widely used in various technological processes. For most of them, high dispersibility and a narrow droplet size distribution are essential. Ultrasonic spraying allows these parameters to be achieved. However, the higher the dispersity of droplets produced by ultrasonic spraying, the lower the spray productivity. To solve this problem, we propose a method of multistage spraying, consisting of the generation of a large number of particles of large initial size (to ensure high productivity) and their subsequent destruction by propagation in a periodic ultrasonic field (to ensure small droplet sizes at high productivity). To experimentally determine the capabilities of this technique, a tubular emitter in the shape of a cylinder with a stepped-variable cross-section was designed. The configuration of the ultrasonic field inside the emitter (22.2 kHz; 182 dB) implements three-stage spraying (the number of sputtering stages corresponds to the number of anti-nodes along the emitter axis). The effectiveness of the proposed and developed technique, suitable for the generation of droplets smaller than 40 µm, with performance exceeding the known ultrasonic spray techniques by at least 10-fold, was confirmed in the course of the conducted research.


  • Open Access

    Development and Analysis of Multistage Spraying of Liquids in Ultrasonic Field

    by Andrey Victorovich Shalunov, Vladimir Nikolaevich Khmelev, Sergey Aleksandrovich Terentiev, Viktor Aleksandrovich Nesterov, Dmitry Vladimirovich Genne

    Spraying various liquids (primarily aqueous solutions of various substances) is widely used in various technological processes. For most of them, high dispersibility and narrow droplet size distribution are essential. This facilitates ultrasonic spray technique. However, the higher the dispersity of droplets produced by ultrasonic spray, the lower the spray productivity. To solve this problem, we proposed a method of multistage spraying, consisting in generation of a large number of particles of large initial size (to ensure high productivity) and their subsequent destruction by propagation in a periodic ultrasonic field (to ensure small droplet sizes at high productivity). To experimentally determine the capabilities of this technique, a tubular emitter in the shape of a cylinder of stepped-variable cross-section was designed. Configuration of the ultrasonic field inside the emitter (22.2 kHz; 182 dB) implements three-stage spraying (the number of sputtering stages corresponds to the number of anti-nodes along the emitter axis). The effectiveness of proposed and developed technique suitable for generation of droplets sized less than 40 µm with performance exceeding the known ultrasonic spray techniques at least 10 times has been confirmed in the course of conducted research.

  • Open Access

    Innovative Acoustic-Hydraulic Method for High-Performance Fine Liquid Atomization

    by Olga Kudryashova, Andrey Shalunov, Dmitry Genne, Roman Dorovskikh, Sergey Titov

    Spray technology is widely used in various industries, including medicine, food production, mechanical engineering, and nanopowder manufacturing. Achieving high dispersion and a narrow particle size distribution is crucial for many applications. Ultrasonic spraying is commonly used to achieve this. On the other hand, hydraulic nozzles provide high atomization performance. Combining these two technologies promises to offer significant benefits, but the complex processes that occur simultaneously in such a device require careful study. This work proposes a fundamental design for an acoustic-hydraulic nozzle and investigates the physical processes when a liquid is sprayed using this nozzle, both theoretically and experimentally. The study identifies the critical modes of spraying and confirms that the simultaneous use of ultrasound and hydraulic pressure can produce a fine spray (droplet size less than 50 μm vs. 150–500 μm for hydrodynamic spray) with high productivity (5–10 mL/s vs. 0.5 mL/min for ultrasonic spray). This approach has significant potential for modern industries and technologies.


  • Open Access

    Acoustic-Hydraulic Nozzle for Fine Spray and High Performance

    by Olga Kudryashova, Andrey Shalunov, Dmitry Genne, Roman Dorovskikh, Sergey Titov

    Spray technology is widely used in various industries, including medicine, food production, mechanical engineering, and nanopowder manufacturing. Achieving high dispersion and a narrow particle size distribution is crucial for many applications. Ultrasonic spraying is commonly used to achieve this. On other hand, hydraulic nozzles provide high atomization performance. Combining these two technologies promises to offer significant benefits, but the complex processes that occur simultaneously in such a device require careful study. This work proposes a fundamental design for an acoustic-hydraulic nozzle and investigates the physical processes when a liquid is sprayed using this nozzle, both theoretically and experimentally. The study identifies the critical modes of spraying and confirms that the simultaneous use of ultrasound and hydraulic pressure can produce a fine spray (droplet size less than 50 μm) with high productivity (5-10 ml/s). This approach has significant potential for modern industries and technologies.