Emanuele Amato
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Emanuele Amato has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Mabrouk Mosbahi
University of Gafsa
3 shared publications - Marco Sinagra
Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy
3 shared publications - Mariem Lajnef
University of Sfax
3 shared publications - Tullio Tucciarelli
Department of Engineering University of Palermo Palermo Italy
3 shared publications - Zied Driss
University of Sfax
3 shared publications - Calogero Picone
Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy
2 shared publications
Latest Publications
- Open Access
- 30 November 2024
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 17 (5) , 58-75
Numerical Model Parameters Impact on Savonius Wind Rotor Performance
Global greenhouse gas emissions are mostly caused by the production of energy extracted from fossil fuels sources. Indeed, the use of renewable clean energy has become crucial to supply the world demand while protecting the planet. For many years, there has been a great deal of interest in wind energy because it is a clean, sustainable energy source. Because of its cheaper cost and independence from wind direction, the Savonius vertical axis wind rotor has the advantage of being suitable for certain implementations as an energy converter. Several studies have been carried out to increase its efficiency from this angle. This research work emphasizes on the Savonius wind rotor numerical model performances. The main goal is to explore the impact of setting the numerical model parameters on its aerodynamic and performance characteristics. Ansys Fluent software 17.0 was utilized to perform numerical simulations utilizing the unsteady Reynolds-Averaged Navier-Stokes (URANS) equations. The mesh sizing, the turbulence model as well as the time step parameters were investigated. The numerical model validation was realized through published experimental findings available in the literature for an inlet wind velocity of 6 ms-1. Good accordance was obtained. Thus the numerical model with the selected parameters was relevant for further investigations. For a tip speed ratio λ=0.64 it gave a torque and power coefficients equal to 0.328 and 0.2, respectively.
- 30 November 2024
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 17 (5) , 58-75
Open AccessNumerical Model Parameters Impact on Savonius Wind Rotor Performance
Global greenhouse gas emissions are mostly caused by the production of energy extracted from fossil fuels sources. Indeed, the use of renewable clean energy has become crucial to supply the world demand while protecting the planet. For many years, there has been a great deal of interest in wind energy because it is a clean, sustainable energy source. Because of its cheaper cost and independence from wind direction, the Savonius vertical axis wind rotor has the advantage of being suitable for certain implementations as an energy converter. Several studies have been carried out to increase its efficiency from this angle. This research work emphasizes on the Savonius wind rotor numerical model performances. The main goal is to explore the impact of setting the numerical model parameters on its aerodynamic and performance characteristics. Ansys Fluent software 17.0 was utilized to perform numerical simulations utilizing the unsteady Reynolds-Averaged Navier-Stokes (URANS) equations. The mesh sizing, the turbulence model as well as the time step parameters were investigated. The numerical model validation was realized through published experimental findings available in the literature for an inlet wind velocity of 6 ms-1. Good accordance was obtained. Thus the numerical model with the selected parameters was relevant for further investigations. For a tip speed ratio λ=0.64 it gave a torque and power coefficients equal to 0.328 and 0.2, respectively.
- Open Access
- 2 June 2024
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 16 (10) , 94-111
Numerical Model Parameters Choice of Helical Savonius Wind Rotor: CFD Investigation and Experimental Validation
Electrical power is essential for human beings welfare. The available wind as a clean and renewable source of energy has whetted extensive interest over decades. Savonius vertical axis wind rotor as an energy converter has the merit of being adequate for specific implementations owing to its lower cost and independency on wind direction. From this perspective, multiple studies have been conducted to boost its efficiency. This research work emphasizes on the helical Savonius wind rotor (HSWR). The basic objective is to investigate the impact of selecting the numerical model parameters on its aerodynamic and performance characteristics. Experimental tests were realized with a 3D printed HSWR in a wind tunnel. The experimental performances in terms of power, static and dynamic torque coefficients were addressed. Next, a numerical study was undertaken through Ansys Fluent 17.0 software. Grid, turbulence model and rotating domain size tests were examined. Good accordance was obtained, which validated the numerical model with an averaged error of 5%. The maximum power coefficient proved to be equal to 0.124 at a tip speed ratio of 0.73 and 0.1224 at a tip speed ratio of 0.69, respectively, numerically and experimentally
- 2 June 2024
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 16 (10) , 94-111
Open AccessNumerical Model Parameters Choice of Helical Savonius Wind Rotor: CFD Investigation and Experimental Validation
Electrical power is essential for human beings welfare. The available wind as a clean and renewable source of energy has whetted extensive interest over decades. Savonius vertical axis wind rotor as an energy converter has the merit of being adequate for specific implementations owing to its lower cost and independency on wind direction. From this perspective, multiple studies have been conducted to boost its efficiency. This research work emphasizes on the helical Savonius wind rotor (HSWR). The basic objective is to investigate the impact of selecting the numerical model parameters on its aerodynamic and performance characteristics. Experimental tests were realized with a 3D printed HSWR in a wind tunnel. The experimental performances in terms of power, static and dynamic torque coefficients were addressed. Next, a numerical study was undertaken through Ansys Fluent 17.0 software. Grid, turbulence model and rotating domain size tests were examined. Good accordance was obtained, which validated the numerical model with an averaged error of 5%. The maximum power coefficient proved to be equal to 0.124 at a tip speed ratio of 0.73 and 0.1224 at a tip speed ratio of 0.69, respectively, numerically and experimentally
- Open Access
- 4 February 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 113 (1) , 24-43
Effect of the Turbulence Model on the Computational Results of a Lucid Spherical Rotor
Due to the excessive increase in the energy demand, renewable energy has become an alternative for electricity production for industrial and domestic needs. Water energy has received significant investment as a sustainable and clean energy source. Lucid spherical rotors, a kind of hydro-power converter, are cross flow rotors designed to be mounted within a pipeline in order to gather excess energy available in gravity-fed water pipelines. This paper focuses on the effect of the numerical model parameters choice, namely the turbulence model, on the Lucid spherical rotor hydrodynamic characteristics. Numerical simulations were carried out through Ansys Fluent software 17.0 using the unsteady Reynolds-Averaged Navier-Stokes (URANS) equations. Four turbulence models: RNG k-ε, Realizable k-ε, SST k-ω and transition SST were tested. Performance characteristics in terms of torque and power coefficients in addition to hydrodynamic features of the flow around the considered rotor were analyzed. The adopted numerical model was validated based on previous experimental findings from the literature. It was found that the realizable k-ε model showed a good agreement with experimental results. Thus, it was adopted for the Lucid spherical rotor simulation. The obtained findings could provide further direction for researchers to use the Lucid spherical water turbine.
- 4 February 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 113 (1) , 24-43
Open AccessEffect of the Turbulence Model on the Computational Results of a Lucid Spherical Rotor
Due to the excessive increase in the energy demand, renewable energy has become an alternative for electricity production for industrial and domestic needs. Water energy has received significant investment as a sustainable and clean energy source. Lucid spherical rotors, a kind of hydro-power converter, are cross flow rotors designed to be mounted within a pipeline in order to gather excess energy available in gravity-fed water pipelines. This paper focuses on the effect of the numerical model parameters choice, namely the turbulence model, on the Lucid spherical rotor hydrodynamic characteristics. Numerical simulations were carried out through Ansys Fluent software 17.0 using the unsteady Reynolds-Averaged Navier-Stokes (URANS) equations. Four turbulence models: RNG k-ε, Realizable k-ε, SST k-ω and transition SST were tested. Performance characteristics in terms of torque and power coefficients in addition to hydrodynamic features of the flow around the considered rotor were analyzed. The adopted numerical model was validated based on previous experimental findings from the literature. It was found that the realizable k-ε model showed a good agreement with experimental results. Thus, it was adopted for the Lucid spherical rotor simulation. The obtained findings could provide further direction for researchers to use the Lucid spherical water turbine.